Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Custom Windows & Doors Across Colleyville
Custom window and door work in Colleyville is not a one-size-fits-all job. Most homes in 76034 were built between the mid-1980s and the 2000s with oversized architectural openings: transoms, arched tops, two-story picture windows. Replacing those units means manufacturing to exact measurements, not pulling stock sizes off a shelf. A typical custom window package in Colleyville runs $900 to $2,800 per opening depending on frame material, glass package, and whether the unit is a specialty shape. Doors run $1,200 to $6,000 installed. Our crews work Colleyville every week and know what the DFW flight corridors demand from glass. Call (888) 635-0804 and a person answers. We’ll schedule a measurement visit and put a written line-item quote in your hand before we leave.
Why TruePane Windows & Doors Is Colleyville’s Preferred Custom Windows & Doors Company
We have been doing this work since 2008, and Colleyville homeowners call us for a specific reason: we quote wind-load ratings, STC acoustic performance, and U-factors side by side on paper. That is rare. Most window companies lead with a sales pitch. We lead with the numbers the building department and your insurance carrier care about.
Dale Kessler founded this company on a rule that still hangs on the whiteboard: if the pane is not true, the job is not done. That means our Custom Windows & Doors team measures every opening twice before ordering. It means both manufacturer warranty layers get registered in writing before the truck leaves your driveway. It means when something goes wrong in the first 90 days, we fix it. No paperwork fights. No arguing. That’s the Done Right Promise.
Colleyville homeowners also deal with a problem few other cities face: living directly under DFW International Airport approach paths. We’ll get into that more below, but it shapes nearly every quote we write for this city. If you live in the northern or eastern stretches of Colleyville, you already know what a landing 737 sounds like through ordinary dual-pane glass.
Our Custom Windows & Doors Services in Colleyville
Custom Shape Windows
Colleyville’s housing stock is dominated by large custom and semi-custom homes with windows that were never standard sizes. Arched tops, radius corners, transoms over entry doors, octagonal accent windows. When those 1990s-era units start fogging or the frames pit from hail, you cannot order a replacement from a big-box store. We template every opening, order units manufactured to the exact measurements, and install them with the flashing details that keep Colleyville’s wind-driven rain on the outside. A custom arch-top Colleyville Window Replacement typically runs $1,400 to $2,800 per unit depending on glass package and frame material.

Oversized Glass Panels
Two-story picture window walls are common in the larger homes along Glade Road and the neighborhoods east of 121. When those panels fail, many are too large for a standard insulated glass unit replacement. We order oversized panels with laminated acoustic interlayers and low-E argon fill, sized to handle the wind loads Colleyville sees from spring storm fronts and DFW corridor air pressure. Installed cost for oversized replacement panels in Colleyville runs $1,800 to $4,500 per opening, with the acoustic glass option adding roughly 15 to 20 percent.

Commercial Storefront Glazing
Colleyville’s commercial storefronts along Colleyville Boulevard and in the Town Center area need glazing that meets Tarrant County wind-load requirements and holds up to hail. We replace broken storefront panes, rebuild sagging aluminum frames, and upgrade thermal performance on older commercial entries. Local business owners appreciate that we quote the work with the permit requirements already accounted for, not as a surprise line item after the job starts.

Architectural Grilles & SDLs
Many Colleyville homes have divided-light windows, either true divided lites or simulated divided lites (SDLs). When a sash fails or a pane cracks, matching the grille pattern matters. We order replacement units with the grille profile, width, and layout matched to the original. For new construction and remodels, we supply SDLs in Andersen, Pella, Marvin, and other manufacturer lines, so the grilles are built inside the insulated glass unit, not stuck on top as an afterthought.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Colleyville
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Colleyville work we lean on the brands that handle wind load and acoustic performance best. PGT and CGI both manufacture Impact Windows & Doors in Colleyville that meet Miami-Dade standards and exceed what Tarrant County wind-load rules require. CWS and ES Windows are our go-to lines for oversized architectural glass and minimal-frame modern designs. Because we are authorized dealers, not brokers, warranty registration is handled directly with the manufacturer before we leave your driveway. We do not resell mystery glass from a warehouse we’ve never visited.
Common Custom Windows & Doors Problems We See in Colleyville Homes
- Fogged, cloudy panes from failed insulated glass seals. Colleyville’s thermal cycling is brutal: sustained 100°F summers followed by hard freezes accelerate seal failure in 1990s-era double-pane units. We see this constantly in homes throughout 76034.
- Jet noise intrusion near DFW flight corridors. Homeowners along the northern and eastern edges of Colleyville have ordinary dual-pane glass that was never meant to handle the acoustic pressure of landing aircraft. Retrofitting with STC 35+ laminated glass is one of the most common requests we field.
- Hail damage to frames, screens, and sills. The Metroplex sits in a high-hail-frequency corridor, and Colleyville’s large custom homes are heavily windowed targets. Cracked screens and pitted aluminum frames are the visible damage; compromised thresholds and drafty openings are what you notice later.
- Non-standard sizes that scare off replacement contractors. Transoms, arches, and two-story picture windows do not fit stock replacements. The cost of getting these wrong is a nine-week wait for a reorder and a window opening covered in plywood.
Pricing for Custom Windows & Doors in Colleyville, TX
Custom windows in Colleyville run $900 to $2,800 per opening installed. The spread comes down to four things: the glass package, the frame material, the size of the unit, and whether the shape requires custom templating. Acoustic laminated glass for flight-corridor homes adds 15 to 20 percent to the unit cost. Custom doors run $1,200 to $6,000 installed depending on panel size, hardware, and whether the opening requires structural framing changes. The Keystone Standard means your quote lists every line item, both warranty durations, and the permit fee. We do not write change orders after the job starts. For a written quote, call (888) 635-0804 and schedule a free estimate.
We Also Serve Cities Near Colleyville
Our Custom Windows & Doors in Colleyville crews also run jobs in Bedford, Hurst, Southlake, and Euless. If you live just over the city line, the same team covers you, and the same Done Right Promise applies. One phone call covers the whole Mid-Cities area.
Serving Colleyville, TX - Our Local Coverage Area
We’re based in the Colleyville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Colleyville
Colleyville is in a wind zone that generally requires windows and doors to meet a design pressure rating of DP 35 to DP 50 depending on exact location, building height, and exposure to open terrain. Tarrant County adopts the International Residential Code with Texas amendments, and your permit application will be reviewed against the current edition. We quote the wind-load rating for every unit, not just the U-factor. If a contractor cannot tell you the DP rating on the quote, that is a red flag. Call (888) 635-0804 and we’ll walk your exact home through the numbers.
Yes, and this is one of the best reasons to spec acoustic glass in 76034. Laminated acoustic glass, typically STC 35 to STC 40, uses an interlayer that also strengthens the glass assembly against impact. That same interlayer is what impact-rated products use to stop windborne debris from breaching the pane. So an STC-rated window with laminated glass generally carries a higher DP rating and better hail resistance than a standard dual-pane unit. You address two problems with one glass package. For an exact product-by-product breakdown, call (888) 635-0804.
Documentation helps. If you have a permit on record showing the units were installed to current wind-load requirements, and you have the manufacturer warranty registration showing the product specs, the adjuster has fewer reasons to dispute the claim or reduce the payout. We register both warranty layers in writing on every job, and we keep the paperwork organized so you can produce it when an adjuster asks. A recent client on the northern edge of Colleyville had exactly this experience after a spring hail event. Her laminated acoustic units were documented and permitted, and the claim processed without a fight. Call (888) 635-0804 and ask us what documentation a compliant install includes.
Most will require custom templating and manufacturing, and some larger openings will require a structural review. A transom over a two-story entryway or a picture window wall spanning a living room is not a stock product at any manufacturer. The good news is that the manufacturers we work with, including PGT, CGI, CWS, and ES Windows, can engineer a unit to match the opening and meet current wind-load requirements without changing the exterior look of your home. What changes is what you cannot see: the laminated glass, the frame reinforcement, and the flashing details. Call (888) 635-0804 and we’ll measure the openings and quote it in writing.
Our quotes list the DP rating for every unit, the STC and U-factor for the glass package, the permit fee, the inspection schedule, and both manufacturer warranty durations in writing. A no-permit quote usually means the contractor has not pulled a permit, which means no third-party inspection verifies the install, and your insurance carrier may later deny a claim on work that was never permitted. You also lose the paper trail that proves the work met code. The permit fee for a window replacement in Colleyville is a small fraction of the total job cost. Skipping it is a risk no homeowner should carry. For a written quote that accounts for permits and inspections, call (888) 635-0804.
Colleyville’s Flight Corridor Is the Wrong Place for Generic Windows
Here is what every Colleyville homeowner should know before they buy windows: this city sits directly beneath active DFW International Airport flight corridors. That is not a footnote. It is the single biggest factor that separates a good window purchase in 76034 from a costly mistake.
Homeowners along the northern and eastern edges of Colleyville, closest to the runway approaches, frequently ask us for STC 35+ or laminated acoustic glass. They have learned, sometimes after paying for a full replacement job once already, that ordinary dual-pane glass lets jet noise straight through. A technician who can quote noise-reduction ratings alongside U-factors will close faster than one leading with energy efficiency alone, because the customer is sitting in their living room hearing exactly what the current glass is doing to them.
We learned this the hard way through experience, not a sales deck. A homeowner on the northern edge of Colleyville near the DFW runway approach called us about fogged, rattling double-hung units in a two-story picture window wall from the late 1990s. Our crew replaced the failed insulated glass units with custom oversized panels using laminated acoustic glass rated STC 38 and low-E argon fill, then rebuilt the sagging sashes and added flashing tape at every jamb. The homeowner now sits in the living room during landing sequences without raising their voice. That is the difference a properly specced glass package makes, and it is the standard we apply to every Colleyville quote.
If you are replacing windows in Colleyville and no one on the bid has mentioned STC ratings, you are talking to the wrong installer. Call (888) 635-0804 and ask about acoustic glass. We’ll quote the numbers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Colleyville since 2008.



Before
After
Before
After
Before
After