Custom Windows & Doors in Dripping Springs - Free In-Home Measure, Written Price

Fast, Reliable Custom Windows & Doors Across Dripping Springs

Custom window and door work in Dripping Springs runs $800-$4,000 per opening for most residential replacements, and $4,000-$18,000 for full custom builds like oversized picture windows, architectural grilles, and curtain wall applications. We’re Custom Windows & Doors specialists who measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. If you live off Fitzhugh Road, inside Caliterra, or up along the ridgelines west of US-290, you already know that a window here is not the same job as a window in Austin. The wind, the cedar pollen, the fire code, the tight lots. It all has to be accounted for. Call (888) 635-0804 and a live person answers, 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form.

Call (888) 635-0804

Dripping Springs sits higher on the Balcones Escarpment than most of the Austin metro. That means stronger prevailing southwest winds, harder UV, and a lot of builder-grade vinyl that started failing early. We know this because we work here every week, not because we looked at a map. The true measure of a custom window or door is whether it is set square and sealed tight on the first visit. Dale Kessler keeps one rule on the whiteboard: if the pane is not true, the job is not done.

Why TruePane Windows & Doors Is Dripping Springs’s Preferred Custom Windows & Doors Company

TruePane has proudly served local communities since 2008. Dale Kessler founded the company in 2008 because he kept seeing the same two problems on job sites: out-of-true installs and warranties voided by paperwork nobody explained. We are the company that fixes both, permanently. Homeowners in Dripping Springs call us because we write down what we are going to do, do it, and then stand behind it in writing. The Done Right Promise is exactly what it says. If the work is not done right, we make it right. No arguing, no fine print that covers neither.

Our technicians are background-checked, uniformed, and trained as apprentices into journeymen. They measure every opening twice. They quote Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and more side by side on paper so you see what you are actually buying. They register both manufacturer warranty layers before they leave the driveway. And a live person answers the phone 24/7, whether you are calling from a ranch off Hamilton Pool Road or a short-lot build in Headwaters. That is not a call-center promise. That is how a company with plans to be in this town in thirty years answers.

Our Custom Windows & Doors Services in Dripping Springs

We install, replace, and service windows and doors for residential homeowners across the 78620 ZIP code. Fully custom windows and doors, impact windows, energy-efficient units, sliding and patio doors, glass railing systems. When the opening is not stock, that is where we do our best work.

Custom Shape Windows

A half-round over a stone-facade entry, a trapezoid transom, an arch-top flanking a metal roof ridge. Dripping Springs is full of Hill Country-style homes where the builder put in a stock window and called it close enough. Close enough turns into a fogged unit and a drafts leak. We measure the rough opening exactly, template the curve off the actual framing, and order the unit from a manufacturer line that actually supports custom geometries. A custom shape window in Dripping Springs typically runs $900-$2,800 per opening installed, depending on the glazing package and whether you need fire-rated glass for a WUI lot.

Oversized Glass Panels

Big fixed picture windows are the signature of Hill Country new construction. The problem is that many were installed fast, with edge seals that start showing condensation between the panes within eight to fifteen years. Strong southwest winds on the escarpment push right against those large panes and amplify any seal weakness. We replace oversized glass panels with heavy-duty insulated units, often upgrading to argon fill and a low-E coating that cuts the UV load that bleaches interior floors and furniture. For a 6-by-8-foot picture unit in a stone facade, budget $1,800-$4,200 installed.

Architectural Grilles & SDLs

Simulated divided lites, true divided lites, prairie grilles, farmhouse two-over-two patterns. Grille work changes the entire look of a house from the street, and getting the proportions wrong makes the facade look off. We lay out grille patterns on paper before ordering, so you see the sightline widths and muntin profiles before the unit is built. In Dripping Springs, many homeowners in master-planned communities like Caliterra and Headwaters replace builder windows and take the opportunity to add SDLs that match the stone and metal-roof aesthetic. Grille and SDL work typically adds $300-$900 per window to the unit cost.

Commercial Storefront Glazing & Curtain Wall Systems

Along US-290, in the small retail and office spaces that serve the area, storefront glass takes a beating from the wind and the sun. We handle commercial storefront glazing and curtain wall systems, whether it is a broken entry door on a storefront near Mercer Street or a multi-panel curtain wall on a low-rise office. Same discipline applies: measure twice, order from the right manufacturer line, set it true. For commercial work, quotes are built line by line after a site visit. Call (888) 635-0804 to schedule one.

Trusted Brands We Service in Dripping Springs

We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Dripping Springs projects we often quote CWS and ES Windows side by side because both hold up well under the Edwards Plateau UV load. We also work with ECO Window Systems for impact-rated and thermally efficient custom orders. We do not pick favorites on your bid. We put the prices on paper and you decide. Parts are ordered to spec, never swapped for whatever is on the truck. That is a square deal.

Common Custom Windows & Doors Problems We See in Dripping Springs Homes

• Fogged builder-grade vinyl after eight to fifteen years. The explosive 2010s construction boom left thousands of tract homes across 78620 with low-quality edge seals. Strong winds and hard UV accelerate the delamination, and we see the same white haze in Caliterra, Headwaters, and Belterra that we see in older builds off Fitzhugh Road.
• Mountain-cedar pollen forcing its way inside. From December through February, Juniperus ashei is brutal out here. Fine yellow dust finds every weak weatherstrip and every sash gap, piling on interior sills and setting off allergies. Tight-sealing replacement units solve a problem that a tube of caulk never will.
• WUI fire-code compliance missed by the last contractor. Many lots along the cedar-covered ridgelines west of US-290 fall inside Hays County’s Wildland-Urban Interface construction standards. That can require ignition-resistant frames and fire-rated glazing. A crew unfamiliar with local code installs a standard unit, and the homeowner ends up with a tear-out and a re-inspection.
• Binding doors and sashes that will not close square. Temperature swings between summer and winter move frames on a slab-on-grade foundation. Doors that bind in July and rattle in December are usually the result of an out-of-true install. We re-set or replace the unit so it closes square in every season.

Pricing for Custom Windows & Doors in Dripping Springs, TX

We Also Serve Cities Near Dripping Springs

TruePane serves Dripping Springs and the surrounding Hill Country communities, including Driftwood, Spicewood, San Marcos, and Manchaca. If you are out that way and dealing with a fogged seal or a door that binds in the summer, call (888) 635-0804 and we will get you on the schedule.

FAQs - Custom Windows & Doors in Dripping Springs