Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Flower Mound
Custom window and door work in Flower Mound isn’t a simple swap-out job. Most homes here were built between the early 1990s and late 2000s, which means the original builder-grade vinyl is failing now, all at once, across entire neighborhoods. Add in Blackland Prairie clay that keeps moving under the slab, plus HOA architectural committees that want paperwork before the first screw comes out, and you need a company that knows Flower Mound specifically, not just north Texas generally. TruePane Windows & Doors has done this work across Flower Mound for years. If you’re looking at fogged panes, warped frames, or a door that binds every July, call (888) 635-0804 and we’ll set up a free estimate.
Why TruePane Windows & Doors Is Flower Mound’s Preferred Custom Windows & Doors Company
Flower Mound homeowners tend to ask the same questions: Will you actually show up on time, will the install hold square on this clay, and will you still answer the phone if something isn’t right next year. Those are fair questions, and we answer them the only way that matters. We show up when we say. We square every rough opening properly before setting a frame. And a live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form.
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That rule governs every install we do in Flower Mound, from a single custom shape window in Wellington to a full curtain wall system on a commercial storefront off FM 2499. Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you’re buying before you commit.
We stand behind the work in writing. Every job carries our Done Right Promise, backed by The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. If something’s off, we make it right. No paperwork fights. No arguing. That’s the square deal, and it’s the only way we work in Flower Mound.
Our Custom Windows & Doors Services in Flower Mound
We install, replace, and service custom windows and doors for Flower Mound homeowners. The work ranges from a single architectural grille upgrade to full-home window replacement with fiberglass or aluminum-clad wood. Here’s what we handle most often. For the complete scope of what we do, see our Custom Windows & Doors page.
Custom Shape Windows
Flower Mound’s two-story brick-veneer homes love arches, ovals, half-rounds, and eyebrow windows over entries and stairwells. Builder-grade versions of these shapes often fail early because the curved IGUs weren’t fabricated to hold a seal in Texas heat. We order custom shapes to the exact radius, with low-E glass and argon fill, and we install them with the same squaring and flashing discipline we use on standard units. If you’ve got a fogged arch window over your front door, that’s almost certainly a failed seal, and it’s fixable without replacing the entire window assembly.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are a recurring topic in Flower Mound HOAs. Many architectural committees require a specific grid pattern, bar width, and exterior color to match the original elevation. We carry manufacturer-matched SDL profiles from PGT, Marvin, and Andersen, and we’ll produce the exact spec sheet your HOA committee wants to see. Getting this right on the first submittal saves you weeks.
Oversized Glass Panels
Master-planned communities like Bridlewood and Tour 18 have their share of floor-to-ceiling windows, two-story living room glazing, and wide sliding door walls. These panels are heavy, and on Flower Mound clay they need precise shimming or the frame flexes and the seal breaks early. We size every oversized panel to the opening, not the other way around, and we spec tempered or laminated glass where code requires it. Homeowners often upgrade these openings to fiberglass frames rather than rebuild with vinyl that will warp again in the same place.
Commercial Storefront Glazing & Curtain Wall Systems
Flower Mound’s commercial buildings along 2499 and around Parker Square need storefront glazing that can handle hail season without cracking and heat without turning the interior into an oven. We service and replace commercial storefront glass and curtain wall systems, including aluminum framing, thermal breaks, and impact-rated glazing where the building code calls for it. Business owners get the same warranty registration and written quote our residential customers get.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Flower Mound
We’re an authorized installer for more than a dozen manufacturer lines, and for Flower Mound projects we most often spec PGT, CGI, and ES Windows depending on the opening and the HOA requirements. PGT’s impact-rated lines make sense for homeowners who want storm protection without sacrificing the look the architectural committee approved. ES Windows carries a strong selection of European-style tilt-and-turn and oversized custom units. We quote manufacturer lines side by side on paper, with the actual numbers, so you see what each option costs before you decide. There’s a permanent 5% discount for seniors and veterans, and we’ll register both warranty layers in writing before our truck leaves your driveway.
Common Custom Windows & Doors Problems We See in Flower Mound Homes
- Fogged double-pane glass from seal failure. The original builder-grade IGUs installed across Flower Mound in the 1990s and 2000s are hitting the end of their 15-to-20-year seal life all at once. You’ll see it as haze or moisture trapped between the panes, and it means the insulating gas is gone. Replacement is the fix, and it’s usually a sash or IGU swap rather than a full tear-out.
- Sashes and door slabs that bind from clay-related frame racking. Blackland Prairie clay swells when wet and shrinks when dry, and Flower Mound’s slab foundations move with it, enough to rack a rough opening out of plumb. The symptom is a window or door that was fine in March and won’t latch in August. Proper shimming and squaring on the new install is the only way to stop the cycle.
- Vinyl frame warping from North Texas heat and sun exposure. West-facing elevations in Flower Mound take brutal afternoon sun, and builder-grade vinyl flexes and warps after enough 100°F-plus summers. When a homeowner replaces warped vinyl with new vinyl, the cycle repeats. We regularly spec fiberglass or aluminum-clad wood on those elevations.
- HOA submittal delays stalling the project. Flower Mound has over 100 active HOAs, and most architectural committees review exterior changes on a monthly cycle. If the paperwork isn’t right, the windows sit in the garage for another four weeks. We build the submittal packet for you: manufacturer spec sheets, color chips, grid pattern, and finish. We’ve done enough Flower Mound submittals to know what gets approved the first time.
Pricing for Custom Windows & Doors in Flower Mound, TX
For a standard custom window replacement in Flower Mound, expect to pay between $1,450 and $3,200 per opening installed, depending on size, frame material, and glass package. A full home window replacement on a two-story Brick-veneer Flower Mound house typically runs $18,000 to $42,000. Architectural grilles and SDLs add $180 to $650 per window depending on the bar profile and pattern. Custom shape windows with curved glass run $2,800 to $7,500 per unit. Oversized glass panels and sliding door walls start around $4,500 and can reach $15,000 or more for floor-to-ceiling glazing. Commercial storefront glazing in Flower Mound typically falls between $90 and $180 per square foot installed. These are real ranges, not lowball teasers. Your exact quote depends on what the HOA will approve and what condition the rough openings are in once we remove the old sashes. Call (888) 635-0804 for a free estimate, and we’ll put every number on paper before you decide anything.
We Also Serve Cities Near Flower Mound
TruePane Windows & Doors serves Flower Mound and the surrounding communities, including Southlake, Roanoke, Grapevine, and Lewisville. If you’re in one of those cities and need the same square-deal pricing and HOA-ready paperwork, we’re close. Custom Windows & Doors in Flower Mound is our home page for this area, and we’d rather drive ten minutes than have you settle for a crew that doesn’t know your HOA’s rules.
Serving Flower Mound, TX - Our Local Coverage Area
We’re based in the Flower Mound area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Flower Mound
Start the HOA architectural review at least four to six weeks before you want installation, because most Flower Mound committees meet monthly and many require physical color chips, manufacturer spec sheets, and sometimes sample frames with the submittal. We prepare that packet for you at the estimate visit, which removes the most common delay. If your HOA requires revisions, expect another one to four weeks. Call (888) 635-0804, and we’ll tell you what your specific HOA’s typical review cycle looks like.
Most Flower Mound HOAs tie exterior window coloration and grid pattern to the original builder elevation, which means you’ll likely need to match the existing lite pattern, bar width, and frame color rather than choose freely. Some committees publish an approved palette; others review each application lot by lot. We pull the original builder spec for your elevation, match it with current manufacturer offerings, and hand you a submittal-ready package so you don’t burn a review cycle on a rejection.
Yes. Fog or haze between the panes means the insulating glass unit’s seal has failed, the argon or krypton gas has escaped, and the unit is no longer insulating. That’s not a cleaning issue, and it won’t clear up. Most original builder-grade IGUs in Flower Mound homes are now past their rated seal life. You can replace the failed IGU or the entire sash without a full tear-out in many cases, and we’ll tell you which option makes financial sense for your elevation. Call (888) 635-0804 for an exact quote.
Flower Mound sits on expansive Blackland Prairie clay that swells when it takes on moisture and shrinks in drought conditions. That seasonal movement shifts the slab and racks the rough openings that your window and door frames sit in. The result is sashes that bind, door slabs that stick at the top corner, and seals that break early because the frame is no longer square. There’s no permanent fix for the clay itself, but proper shimming, squaring, and flashing on every new install keeps the unit functioning through the movement. We measure every rough opening after the old frame comes out, not before, and we square it before the new unit goes in.
For most Flower Mound homes, the original builder’s structural warranty has already expired, and even where it hasn’t, window replacement by a licensed contractor does not void the remaining structural coverage. What can void a warranty is an improper install that damages the surrounding framing or flashing, which is why we document the rough opening condition before and after every install. If there’s ever a question, we have the paperwork. That’s the Keystone Standard, and we register every warranty layer in writing before the truck leaves your driveway.
How We Handle a Typical Flower Mound Window Replacement
Here’s the workflow that keeps a Flower Mound HOA submittal from turning into a three-month stall. First, we come out and measure every opening twice, not once. Second, we produce a line-item quote with manufacturer lines side by side on paper, and we draft the HOA submittal packet at the same visit, with spec sheets, color chips, and grid pattern details. Third, you submit the packet, and when the approval lands, we schedule the install. On the day of the job, we remove the old sashes, square the rough openings, re-flash every jamb and sill, and set the new units. We register both warranty layers before we leave. That’s the job, done in writing.
On a 2003 brick-veneer two-story near the Bridlewood HOA, our crew replaced seven failed double-hung vinyl windows with fiberglass units from Marvin, each fitted with low-E glass and argon fill. The original insulated glass units had widespread seal failure, visible fog between panes, so we removed the sashes, squared the rough openings that had shifted on Blackland Prairie clay, and re-flashed every jamb and sill. We handed the homeowner an HOA-ready packet with spec sheets and color chips the same day.
If you’re in Flower Mound and your windows are fogged, warped, or binding, don’t wait through another Texas summer. Call (888) 635-0804 and schedule a free estimate. We’ll show you the numbers, hand you the HOA packet, and install the windows so they stay true.
Written by Dale Kessler, owner of TruePane Windows & Doors, serving Flower Mound with square-deal custom window and door work backed by the Done Right Promise.