Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Hurst
Custom windows and doors in Hurst aren’t a one-size-fits-all job, and anyone who quotes them that way hasn’t worked many houses between Precinct Line Road and Hurstview Drive. Most of the homes in the 76053 and 76054 zip codes were framed in the 1960s and 1970s, when rough openings followed looser tolerances and standard sizes weren’t quite what manufacturers ship today. That means a straight swap is rare. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. If you’re pricing a replacement or a full custom build, call (888) 635-0804 for a free line-item estimate.
TruePane has been serving Hurst homeowners for years from our Dallas-Fort Worth metro office, and the crews who show up at your door know the difference between a 1965 brick ranch on a slab and a 1980s two-story on a pier-and-beam foundation. That local knowledge changes how the job gets quoted and how it gets built out.
Why TruePane Windows & Doors Is Hurst’s Preferred Custom Windows & Doors Company
The work we do in Hurst is craft work, not a franchise playbook. The founding rule on Dale Kessler’s whiteboard hasn’t changed in years of glazing heritage: if the pane is not true, the job is not done. Homeowners in Hurst call us because they’ve been burned once by a low bid that turned into filler framing and a fogged seal two summers later. We’d rather lose a bid than deliver that.
Every TruePane technician is background-checked and uniformed. They work in your home the way they’d work in their own mother’s house, which is the standard, not a slogan. We carry a strong local reputation in Hurst, and when a customer near Hurstview Drive calls about a door that won’t latch in August, we know to check the slab before we check the hinge screws. That’s the kind of diagnosis that separates a repeat-business contractor from a one-and-done install crew.
Our builders know Hurst’s lot sizes, its setback rules, and how to stage a job when the side yard is four feet wide and the neighbor’s fence is two feet from the jamb. We give written notice before the saw starts, we respect work-hour ordinances, and we sweep the sidewalk before we leave. A square deal on a tight lot is still a square deal.
Our Custom Windows & Doors Services in Hurst
Custom Shape Windows
Hurst has a surprising number of homes with eyebrow windows, half-rounds, and angle-top openings that were custom-framed fifty years ago and can’t be filled with a stock size. We order custom shape windows to the opening, measured twice, quoted on paper. The clay soil under Hurst shifts with the seasons, so we always check the rough opening for rack before we order glass. A window that fits the printed dimensions but not the actual frame is a warranty claim waiting to happen.
Architectural Grilles & SDLs
Simulated divided lites matter in Hurst’s older brick ranches, where the original front elevations were designed around window grids. Getting the bar width and profile right keeps the house looking like itself, not like a flipper’s afterthought. We quote SDL patterns from multiple manufacturers so you can compare the visual weight of the grid on paper before you commit. Most homeowners near Hurstview Drive choose a pattern that matches the original sashes, which preserves the street view.
Oversized Glass Panels
Hurst’s later additions, sunrooms, and converted patios often call for glass panels that exceed standard tempering limits. We handle oversized glass orders as a normal part of our custom work, not a special case, and we coordinate the structural requirements with the manufacturer before the panel is cut. The price on a large panel is driven by glass thickness, tempering, and low-E coatings, and we walk through those numbers line by line so there are no surprise line items on the bill.
Commercial Storefront Glazing
Hurst’s retail and small-commercial properties along Pipeline Road and portions of Tarrant County’s Mid-Cities corridor need storefront glazing that stays square when the slab moves. We handle commercial storefront replacement with the same Done Right Promise we put on residential work. If the storefront goes out of true after a hard freeze or a summer of settlement, we make it right. That promise is in writing.
We also install and service curtain wall systems where a commercial or institutional building in Hurst calls for full-height glass, though those projects are quoted on site after a structural review of the existing frame and anchor points.
Trusted Brands We Service in Hurst
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. In Hurst, the lines we specify most often are PGT and CGI for impact-rated work where hail is a yearly fact, and Milgard for fiberglass entry doors that hold their seal through the temperature delta between a July afternoon and a January freeze. Since we stock local parts and have relationships with regional suppliers, we don’t pad lead times. If the manufacturer has a known issue on a particular line, we’ll tell you before you buy it, not after the install.
Common Custom Windows & Doors Problems We See in Hurst Homes
- Fogged aluminum windows left in place since the 1960s. The insulated glass unit failed years ago, the argon fill is gone, and the U-factor has climbed. We see this constantly on brick ranches near Precinct Line Road. The fix is a full replacement, not a glazing repair.
- Doors that won’t latch by late summer. The Blackland Prairie clay under Hurst expands and contracts with moisture, and that seasonal heave torques door frames out of square. A door replacement in Hurst often requires shimming, frame correction, or a threshold reset before the new slab is hung. Out-of-area crews who underbid the job skip that step.
- Non-standard rough openings from the 1960s and 1970s. Original windows in Hurst’s ranch stock don’t always match modern stock sizes, and contractors who assume a standard 3/0 or 2/8 door opening get burned at the jamb. We’ve fixed filler framing and gap-toothed installs more times than we’d like.
- Hail damage to glazing and frames. North Texas hail pits glass and cracks aluminum in minutes. A low-E insulated replacement with a tested impact rating is a functional necessity here, not an upsell.
Pricing for Custom Windows & Doors in Hurst, TX
A custom shape window in Hurst typically runs $700 to $2,200 per unit depending on the arc, size, glass package, and frame material. Architectural grilles and SDLs add $80 to $220 per sash, and oversized glass panels start around $1,800 and climb with tempering and low-E requirements. A full custom entry door replacement with a fiberglass slab, new jamb, and hardware runs $1,900 to $4,500, and the final number depends on how far the opening is out of square.
What Affects the Quote on a Hurst Lot
- Staging and parking. If we can’t stage material in your driveway and the side yard is too narrow for a trailer, we stage on the street with a written permit if the city requires one. That adds a modest line item to the quote; we tell you before we start.
- Permit and review complexity. Hurst’s permitting requirements vary by overlay district, and older setbacks can limit what you’re allowed to enlarge. We pull permits where the city requires them and we don’t start sawing before they’re posted.
- Work-hour and noise rules. Hurst enforces construction noise limits, and a compressor running near a party wall before 7 a.m. will earn a neighbor’s complaint. We schedule work inside permitted hours and we give written notice to adjacent houses.
Call (888) 635-0804 and we’ll walk through your house, your openings, and your lot access, then put a written line-item estimate in your hand. The estimate is free. The numbers won’t move after the work starts unless you change the scope.
We Also Serve Cities Near Hurst
Our crews handle custom windows and doors in Bedford, North Richland Hills, Colleyville, and Euless as part of our regular service area, along with the broader Mid-Cities corridor. If you’re in Hurst proper or just over the city line, the same team, the same Done Right Promise, and the same phone number apply. We don’t hand your job off to a subcontractor when it’s five miles from the shop.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Hurst
Access changes the number, and not in a vague way. If we can’t stage material in your driveway or side yard without blocking a sidewalk or a neighbor’s approach, we stage on the street, and that means a street-use permit and sometimes a shorter work window. On a lot off Hurstview Drive where our crew replaced a 1970s hollow-core steel entry door with a custom Milgard fiberglass unit, the side yard was too narrow for a trailer, so staging went on the driveway apron and the street. We gave the neighbors written notice before the saw started, reset the threshold after the original jamb was racked nearly 3/8 inch out of square from slab settlement, and swept the sidewalk before we left. That kind of access planning adds time to the quote, and we factor it in before you sign anything.
In many cases, yes, and the answer depends on whether your street falls under a specific overlay or historic review requirement. Hurst’s building department generally requires a permit for structural changes like enlarging an opening or altering a header, and some overlay districts add a design review step that a straight replacement doesn’t trigger. Our team checks the permit requirements for your address before we quote, and if a permit is required, it’s pulled and posted before the first cut. We don’t leave the permit to the homeowner to chase down after the fact.
The Blackland Prairie clay under Hurst expands in wet season and contracts in dry heat, and that seasonal heave shifts the slab enough to torque a door frame out of square. By late summer, the hinge side and latch side are no longer in the same plane, so the door binds. The fix is foundation-driven misalignment first, then door replacement. You can’t just file the strike plate deeper and call it done. When we diagnose the opening before quoting the door, we avoid installing a beautiful new slab into a frame that’s still racked.
Yes. Hurst enforces construction noise and work-hour ordinances, and on a dense lot or a street with party walls, running a saw before 7 a.m. or an air compressor after sunset will get a call. We schedule installs inside those hours, we give written notice to adjacent houses when we’ll be making noise, and we keep the staging tight so the sidewalk stays clear. If you have an HOA with its own work windows, give us the rules and we’ll fit the schedule to them.
When the insulated glass unit fails and fog forms between the panes, the argon fill is gone and the seal is dead, and there’s no repair that restores the original thermal performance. The unit gets replaced, not re-glazed. On Hurst’s 1960s and 1970s brick ranches, that usually means replacing the entire window, because the original aluminum frame isn’t worth re-skinning. We’ll walk you through the difference on site so you know whether you’re paying for a full replacement or a sash swap.
Call (888) 635-0804 for a free estimate on custom windows and doors in Hurst. We’ll measure, quote, and register both warranty layers in writing before the truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hurst and the Mid-Cities with a second-generation glazier’s craft standard since 2008.