Awning Windows

Awning Windows in Columbus, OH | TruePane Windows & Doors

Awning windows are top-hinged, crank-out windows that open outward from the bottom, letting fresh air in while the glass panel itself sheds rain away from the opening. In hurricane-prone construction, that geometry matters: you can keep them cracked open during a light Florida rain without water pooling on the sill. TruePane Windows & Doors installs these impact-rated awning windows across Columbus and central Ohio, pairing laminated impact glass with a weathertight frame that stays square under wind load. Whether you’re replacing a single kitchen window or spec’ing a full fenestration package, our crew sets every unit level, plumb, and square with HVHZ-compliant installation practice. Call (888) 635-0804 to talk through your project.

Call (888) 635-0804

Product Overview - Awning Windows

An awning window hinges at the top and cranks outward from the bottom, creating an angled glass awning that deflects rain while still allowing ventilation. That’s the core reason homeowners in Columbus choose this profile for kitchens, bathrooms, and anywhere they want airflow without inviting weather inside. It’s also a genuinely smart profile for hurricane-impact construction because the outward-opening sash presses against the frame when wind hits it, rather than pulling away from the weatherstripping like a casement or single-hung can.

Our Impact Series awning windows use laminated impact glass with a PVB interlayer as the standard glass package, set into either aluminum or vinyl frames. The laminate is the workhorse here: if debris strikes the glass, the interlayer holds the fragments in place rather than letting them blow into the room. We offer these windows through our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, which gives you real flexibility on profile depth, finish, and hardware without changing the performance story. For Columbus homes, it’s a window that solves two problems at once: daily ventilation and storm-readiness in a single frame.

Technical Specifications

Here’s what you can specify on an Impact Series awning window from TruePane Windows & Doors. These are the core options we quote most often for Columbus projects:

• Frame materials: Aluminum or vinyl. Aluminum gives you a thinner sightline and is our common choice for impact-rated work in exposed locations; vinyl offers a budget-friendly thermal break.
• Glass options: Laminated Impact Glass with PVB interlayer (standard on Impact Series), Low-E Insulated Glass (for energy performance), Tinted Glass, and Clear Glass.
• Finish colors: White, Almond, Bronze, Black, and Tan. Powder-coated or factory-finished depending on the line.
• Screen options: Fixed Screen or Retractable Screen. Retractable screens roll out of sight when you don’t need them, which keeps sightlines clean on view-facing elevations.
• Operation: Crank-out hardware, top-hinged. Multi-point locking optional on larger units.
• Design pressure: Design pressures matched to your wind zone, up to +/-100 - never higher.

Sizing is configurable within manufacturer maximums for each line. We verify dimensions, design pressure, and compliance documentation on every quote so there’s no guesswork at permit time.

Hurricane & Compliance Performance

Laminated Impact Glass
The glass package uses a PVB (polyvinyl butyral) interlayer bonded between two panes of glass. Under impact, the glass may crack but the interlayer holds the broken pieces in the frame, keeping the window envelope sealed against wind and rain. That’s the mechanism that matters for storm protection, and it’s the standard glass on every Impact Series awning window we quote in Columbus.

Miami-Dade NOA / Florida Product Approval
Each configuration carries a Miami-Dade NOA (Notice of Acceptance) or Florida Product Approval number. These approvals are issued per configuration, so the specific number for your window depends on the frame, glass, and size combination. We include the approval documentation with your quote so you can verify your exact configuration.

FBC / HVHZ Compliance
Impact Series awning windows from TruePane Windows & Doors are engineered to Florida Building Code (FBC) High-Velocity Hurricane Zone (HVHZ) requirements. In practical terms, that means the frame, glazing, anchoring, and hardware are designed to work as a system under hurricane wind loads, not just as individual rated components.

TAS 201 / TAS 202 / TAS 203 Testing Context
HVHZ-rated products are tested under a protocol family that includes TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. This is the testing foundation behind the NOA and Florida Product Approval numbers. When we quote your awning windows, we can walk you through which tests apply to your specific configuration.

Design Pressure for Your Wind Zone
Design pressures are matched to your wind zone, up to +/-100, and never higher. The right DP rating for your Columbus opening depends on your structure’s exposure category, building height, and the window’s placement on the wall. We don’t oversell rating because that would make the window harder to operate and costlier than it needs to be.

Energy Performance (Low-E / Insulated Options)
With Low-E insulated glass, you get a thermal break that reduces heat gain through the glass and helps keep interior temps steadier in Columbus summers. Tinted glass is also available for stronger sun control on west-facing and south-facing elevations. These coatings and tints apply to the same impact laminate construction.

Color & Glass Options

The finish palette for awning windows keeps things simple and versatile: White, Almond, Bronze, Black, and Tan. For Columbus’s older brick colonials and mid-century homes, White and Almond tend to blend with existing trim. Bronze and Black read as more contemporary and hold up well on stucco or Hardie-sided homes where you want the window to read as a crisp architectural line. Tan works on earthy stucco palettes and warmer Mediterranean-style elevations.

On glass, the laminated impact package is the default, but you can layer performance on top of it. Low-E insulated glass is the right choice for Columbus rooms that get direct afternoon sun and where you want to cut heat gain without adding window film. Tinted glass does similar work for glare-prone exposures while keeping a sleek exterior appearance. Clear glass is the economical option when you want the impact rating but don’t need solar control, and it’s still a full laminated unit. Every glass option we quote for the Impact Series maintains the PVB interlayer, so you’re never trading storm protection for energy performance.

Installation by TruePane Windows & Doors in Columbus

An NOA-rated window is only as good as its installation. The approval documentation assumes a specific anchoring and sealing practice, and if the opening isn’t prepped properly, the whole rated system loses its teeth. That’s why TruePane Windows & Doors installs awning windows to AAMA 2400/2410 practice, which governs flashing, shimming, and anchoring for exterior windows, and uses AAMA 812 low-expansion foam perimeter sealant to create a tight, continuous air and water seal around the frame.

We start with a pre-installation inspection of the rough opening, checking for rot, out-of-square framing, and any water damage that would undermine the new window. We won’t install a rated window into a compromised opening without addressing the framing first. From there, we set the unit level, plumb, and square, shim it properly, anchor it per the manufacturer’s HVHZ-approved installation details, and apply the perimeter foam seal. We finish with a water test and a full cleanup.

For Columbus homeowners, the practical concerns are exposure and permitting. Some neighborhoods sit closer to open wind fetch than others, and your structure’s wind zone determines what design pressure rating we specify. If your project is in an HVHZ-designated area, we know the permitting path and can supply the Florida Product Approval or Miami-Dade NOA documentation your building department will ask for. The bottom line is that professional installation protects the engineering you’re paying for. Call (888) 635-0804 to schedule a site measure.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Columbus

The fastest way to price awning windows for your Columbus home is to have us take a look at the openings. We measure on-site, verify your wind zone and design pressure requirements, and put together a line-item quote with the glass, finish, and screen options you want. Call (888) 635-0804 today to start your project or schedule a free on-site measurement.

Written by the team at TruePane Windows & Doors, installing hurricane-impact windows and doors in Columbus, OH.