Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFrench & Double Doors in Columbus, OH | TruePane Windows & Doors
French and double doors bring wide, symmetrical openings to patios, balconies, and interior-to-exterior transitions, and in Columbus, they have to do more than look good. TruePane Windows & Doors supplies and installs paired impact-rated French doors built around laminated glass in every lite, so the glass stays in the frame when debris hits. We carry this profile across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, which means you’re choosing from tested, code-driven configurations rather than a single off-the-shelf unit. If you’re replacing a sliding door or planning a new opening in Columbus, call (888) 635-0804 and we’ll walk you through what fits your wall, your wind zone, and your budget.
Product Overview - French & Double Doors
The defining feature of a French door is symmetry: two paired panels that meet in the center, with glass running top to bottom in each one. On an impact-rated version, that glass is laminated, not tempered, which changes how the door behaves under storm loading. Instead of shattering into pieces when struck, the glass cracks but holds to the PVB interlayer, keeping wind and water on the outside where they belong. That’s the core difference between a decorative French door and one that meets Florida’s High-Velocity Hurricane Zone requirements.
These doors suit Columbus homes where a wide opening to a lanai, patio, or pool deck matters architecturally. You see them on Mediterranean and coastal-inspired elevations, but they work just as well on modern builds that want clean lines and a lot of natural light. The multi-point locking hardware on each pair engages at the top, bottom, and center of the active panel, which gives the door structural rigidity when it’s closed and locked. Frame options in aluminum or vinyl let you match the door to the rest of your window and door package without mixing profiles.
TruePane Windows & Doors has installed this exact product type across Columbus and the surrounding area, and we treat every opening as a structural element, not a trim item. The frame, the anchor schedule, and the sealant plane all matter as much as the glass itself.
Technical Specifications
Here’s what you can specify on a French and double door configuration through TruePane Windows & Doors. These specs are drawn from the impact-rated lines we sell and install, not a generic residential door catalog.
- Frame materials: Aluminum or vinyl. Aluminum gives you a narrower sightline and more color flexibility. Vinyl offers a lower-maintenance profile with good thermal performance for Columbus’s hot, humid summers.
- Maximum size: Up to 96 inches wide across the pair, subject to wind zone and design pressure confirmation.
- Glass options: Laminated impact glass with a PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. The laminated option is the one that carries the impact rating.
- Finish options: White, almond, bronze, black, or tan. Finish availability varies by frame material and manufacturer line.
- Hardware: Multi-point locking hardware on the active panel as standard on impact-rated configurations.
- Compliance documentation: Miami-Dade NOA and Florida Product Approval numbers are issued per configuration. We confirm the exact numbers that apply to your quoted setup.
Hurricane & Compliance Performance
Laminated Impact Glass
Every lite on this door profile is laminated with a PVB interlayer. When debris hits, the glass fractures but the interlayer holds the broken pieces in place, so wind and rain don’t enter through the opening. This is the mechanism that makes the door impact-rated, not just wind-rated.
Miami-Dade NOA / Florida Product Approval
Each configuration carries its own Miami-Dade Notice of Acceptance and Florida Product Approval numbers. These are issued per specific size, glass, and frame combination. We verify the exact numbers on your quote so what’s submitted to the permitting office matches what we install.
FBC / HVHZ Compliance
This door profile is engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That means the frame, glass, hardware, and anchoring are designed as a complete assembly, not as separate components that happen to work together.
TAS 201 / 202 / 203 Testing Context
HVHZ-rated doors in this category are tested under the TAS protocol family: TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. These are the tests that determine whether a door earns its NOA, and they’re conducted on the full assembly, not just the glass.
Design Pressure Matched to Your Wind Zone
Design pressures are matched to your specific wind zone, up to +/-100 and never higher than what the location actually requires. We don’t oversell a rating you don’t need, and we don’t underspec one you do. Your Columbus property’s exposure determines the number.
Energy Performance
Low-E and insulated glass options are available on these doors, which matters in Columbus’s climate. The Low-E coating reduces solar heat gain through the glass while insulated units add a second barrier against heat transfer. The laminated impact layer is the structural core; Low-E and insulation build on it.
Color & Glass Options
Five finish options give you room to match the door to your home’s existing trim or make a deliberate contrast. White and almond read classic on stucco and light-painted exteriors. Bronze and black work well on contemporary Columbus homes and on elevations where the door is meant to anchor the facade. Tan sits between the two camps and hides dust well on homes near unpaved roads or heavy landscaping.
On the glass side, clear laminated impact glass is the starting point when you want maximum light and an unobstructed view. Tinted glass cuts glare and solar heat in west-facing Columbus openings, which matters on afternoon patios. Low-E insulated glass adds year-round thermal performance, and it’s a smart pairing for homeowners who run air conditioning most of the year. All glass options on impact-rated configurations keep the PVB interlayer, so choosing Low-E or tint never sacrifices the protective layer.
Installation by TruePane Windows & Doors in Columbus
A French door is only as good as its installation. An impact-rated assembly that’s set out of square or anchored incorrectly won’t perform anywhere near its tested rating, no matter how good the product is. That’s why we install every French and double door in Columbus the same way, starting with a pre-install inspection of the rough opening, the existing header, and the exterior moisture barrier.
We set every door level, plumb, and square before anchoring, then seal the perimeter with AAMA 812 low-expansion foam. This step matters in Columbus’s humid climate because thermal movement and wind-driven rain both find their way through gaps that ordinary caulk can’t handle. The full installation practice follows AAMA 2400 and 2410 standards, which cover installation methods for windows and doors in exterior walls, including flashing and water management details.
Before we wrap, we run a final water test on the sill and threshold, confirm the panels operate smoothly, and walk the exterior sealant line with you. For Columbus properties in HVHZ-governed jurisdictions, we’re familiar with the permit and inspection cycle, and we make sure the NOA or Florida Product Approval numbers on your quote match what the building department expects to see. Improper installation voids what the manufacturer engineered, so this is not a corner to cut.
Frequently Asked Questions - French & Double Doors
Design pressure is matched to your specific wind zone in Columbus, up to +/-100, and never higher than required. We confirm the required rating during the quoting process based on your property’s location and exposure. Call (888) 635-0804 and we’ll pull the numbers for your address.
Lead times vary by manufacturer line and configuration, but impact-rated French doors from PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass typically run several weeks from order to delivery in Columbus. Custom sizes, specific finishes, and Low-E insulated glass options can extend that. We give you a realistic window on the quote so you can plan your project.
Most HVHZ-governed jurisdictions in Florida require either an NOA or Florida Product Approval number for impact-rated door installations. The exact requirement depends on your local building department. We verify the applicable numbers for your specific configuration and include them on your quote documentation. Call (888) 635-0804 to get that process started.
Yes, within the manufacturer’s tested limits. The maximum width is 96 inches across the pair, and we work within each line’s approved size matrix so the door retains its NOA or Florida Product Approval. Custom sizes outside the tested range aren’t available because they’d lose their compliance documentation.
Wash the glass with mild soap and water, and clean the frame with a soft cloth. Keep the track and threshold clear of debris so the door seats properly when closed. Check the weatherstripping and multi-point lock points once or twice a year, especially before hurricane season in Columbus. If a panel feels stiff or the lock doesn’t engage cleanly, call us at (888) 635-0804 before forcing it.
Get a Quote - French & Double Doors in Columbus
Ready to price a pair of French and double doors for your Columbus home? Call (888) 635-0804 to talk through your opening, your finish and glass preferences, and your wind zone requirements. We’ll schedule a free on-site measurement and put a written quote together with the exact NOA or Florida Product Approval numbers that apply.
Written by the team at TruePane Windows & Doors, serving Columbus, OH.
Detailed Images
