Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Bedford
Door installation in Bedford, TX typically runs $450-$2,900 depending on the door type and what we find when the old unit comes out. A standard pre-hung entry door replacement in one of Bedford’s 1970s brick-veneer ranches usually lands between $900 and $1,800, including tear-out, framing correction, and new trim. We serve all three Bedford ZIP codes, 76021, 76022, and 76095, and we’re the local team that understands what decades of Blackland Prairie clay does to a door frame. Call (888) 635-0804 to schedule your free estimate, and a live person will answer.
Why TruePane Windows & Doors Is Bedford’s Preferred Door Installation Company
Bedford is a fully built-out, landlocked Mid-Cities suburb, and that changes how we approach every job here. There are no new subdivisions going in, which means virtually every door we install in Bedford is a replacement in a home built between 1965 and 1985. That’s not a problem for us; it’s what we plan for. Our technicians walk into a Bedford job already knowing the frame is likely racked, the sill plate may be hiding rot, and the rough opening hasn’t been square since the first Reagan administration. That’s the difference between an installer who slaps a door in and one who corrects the opening so the new unit actually closes true.
We’ve been doing this work since 2008 as TruePane, and the craft behind it goes back many years through Dale Kessler’s glazing lineage. Bedford customers call us because we tell them what we’re going to find before we open the wall, not after. Every technician who walks onto a Bedford job site is background-checked, uniformed, and trained to measure twice and quote side by side on paper. You get a written line-item estimate before any work begins. No change orders appear out of nowhere, and no second truck shows up with a bill you didn’t approve.
Our reputation in Bedford is built on the Done Right Promise and The Keystone Standard. Both manufacturer warranty layers are registered in writing, with durations stated, before our truck leaves your driveway. If something isn’t right in the first 90 days, we make it right. No paperwork fights. No arguing. That promise applies to every Door Installation project we take on in Bedford, from a simple storm door to a custom pivot entry.
Our Door Installation Services in Bedford
Bedford’s housing stock demands a specific approach, and these are the door types we install most often in this city’s ranch homes and early brick-veneer builds.
Entry & Swing Doors
Most Bedford entry doors are original hollow-core steel units from the Carter era, and they’re tired. We install fiberglass and steel entry systems from manufacturers like PGT and ProVia that hold up to the DFW thermal swing. A new entry door in Bedford isn’t just a door; it’s the first line against 100°F summer heat and January ice storms that exploit every gap in a seal. We correct the racked opening, set the new pre-hung unit plumb and square, and flash it properly so water never finds the sill plate again.
Double & French Doors
Double French doors in Bedford take a beating. The clay soil under the slab moves, the two slabs get out of alignment, and suddenly the astragal won’t meet and the weatherstripping won’t compress. We install double door systems with reinforced frames and adjustable astragals, and we start every job by checking the opening for rack before quoting. In Bedford’s 1970s homes, the typical problem isn’t the door; it’s the squareness of the hole it lives in.
Storm Doors
A storm door is the most practical, cost-effective upgrade we install in Bedford. It adds a dead-air barrier against the summer heat, protects your entry door from North Texas hail, and gives you a screen option for the two weeks of spring and fall when you actually want the front door open. We install full-view, retractable-screen, and mid-view storm doors, and the job usually takes a single visit. If the existing entry door is racked, we’ll tell you before we hang the storm door, because the storm door will bind too if the opening isn’t corrected.
Bifold & Folding Doors
Bifold and folding doors are showing up more often in Bedford as homeowners rework patios and sunrooms, but the install requires the same scrutiny as any other door. We set folding door systems with proper head support and floor track anchoring, and we never assume an older Bedford opening is square just because the old slider looked fine. These doors are heavy, and the header has to carry the load. In a 1970s ranch, that header may need reinforcement before the panels go in.
Pivot Doors
Pivot doors are a statement piece, and they’re rare in Bedford’s ranch stock, but when a homeowner wants one, the engineering has to be right. A pivot door transfers its entire weight to the floor hinge and the top pivot, which means the floor system and header both have to be solid. We’ve installed pivot doors on Harwood Road and along the streets near Central Drive, and every one started with a structural check of the opening. If the frame can’t carry the load, we say so before we quote.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Bedford homeowners, that means you can compare PGT and CGI side by side on paper before you commit, with actual prices, not vague ranges. We keep common parts and hardware for these lines stocked in our Dallas-Fort Worth warehouse so a Bedford service call doesn’t stretch into a two-week wait. Most door replacements go from measurement to install in under ten days. Call (888) 635-0804 and tell us what you’re working with, and we’ll pull up our availability while you’re on the phone.
Common Door Installation Problems We See in Bedford Homes
Bedford gives us a specific set of recurring problems, and we’ve learned to check for every one of them before we quote a replacement.
- Racked frames from clay-soil movement. Bedford’s expansive Blackland Prairie clay swells when wet and shrinks when dry, and over 40 years that movement racks door frames out of square. A new pre-hung door forced into a racked opening will spread or pinch within one season, and the slab will stick or fail to latch. We correct the rough opening before we set anything.
- Rotted sill plates hiding under old thresholds. In 1970s Bedford homes, decades of moisture intrusion have rotted out sill plates that were never flashed properly. Skip the sill-plate inspection, and your new door’s threshold and brickmold fail prematurely. We inspect the sill on every entry door replacement, and we replace rotted lumber before the new unit goes in.
- Failed waterproofing behind the old jamb. Applying new flashing tape over old, failed waterproofing doesn’t stop water; it just hides the problem until mold and rot void the door warranty. On Bedford homes with brick veneer, we strip the old flashing, inspect the sheathing, and re-flash the opening so water runs away from the jamb, not behind it.
- Door slabs that stick in summer and gap in winter. In Bedford’s 1970s subdivisions, this is almost always a clay-soil foundation-movement problem, not a door defect. If you’ve adjusted the hinges twice and the door still binds each July, the frame is racked. We check the head jamb and sill for rack before we quote a replacement, or the new door will bind within a season just like the old one.
Pricing for Door Installation in Bedford, TX
Door installation in Bedford, TX costs are driven by the door type, the condition of the opening, and what we find when the old unit comes out. Here is what Bedford homeowners can expect on this market:
- Storm door installation: $450-$900 depending on glass package and hardware
- Standard pre-hung entry door replacement: $900-$1,800, including a basic steel or fiberglass slab
- Double French door installation: $1,800-$3,200 depending on frame condition and glass package
- Pivot door installation: $2,900-$6,000, including structural header work where required
What moves the price in Bedford is almost always framing correction. If the existing opening is racked and requires re-squaring, that adds $150-$400 to the job, and we’ll show you the line item in writing before we start. If the sill plate needs replacement, it adds $200-$500, and we’ll show you the rot before we cut anything. We don’t hide these costs in the bid and surprise you later. We write them as allowances the first time we walk the job. Call (888) 635-0804 for a free estimate, and we’ll give you a number you can plan around.
We Also Serve Cities Near Bedford
Our Bedford crews work the whole Mid-Cities corridor. If you’re in Hurst, Euless, Colleyville, or North Richland Hills, we bring the same Keystone Standard and the same familiarity with Blackland Prairie clay soil to your door replacement. Door Installation in Bedford is our home base for this side of the metro, and we dispatch from our Dallas-Fort Worth office directly to your address.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Bedford
The frame is racked, not the hinges. Bedford’s expansive Blackland Prairie clay soil swells and shrinks with moisture, and over 40 years that movement has pulled your door’s rough opening out of square. Adjusting hinges treats the symptom. The fix is to correct the rough opening, which usually means removing the old unit, re-squaring the jamb and sill, and setting a new pre-hung door in a true opening. That’s standard procedure on our Bedford jobs. Call (888) 635-0804 and we’ll check the frame before we quote you anything.
Most like-for-like door replacements in Bedford do not require a permit, but if we open the wall and find outdated wiring or undersized framing, a permit inspection may be triggered, and those code upgrades become your responsibility. We handle this by inspecting the opening before we quote, writing realistic allowances into the contract for common Bedford-era issues, and pricing any surprise in writing for your approval before we touch it. You never pay for a second opening without knowing why. Call (888) 635-0804 for an exact quote on your specific door.
For most Bedford ranch homes, a fiberglass entry door with a thermally broken frame is the best mix of durability, energy performance, and price. Fiberglass handles the DFW heat without warping, and it won’t conduct cold into your living room the way an original steel door does every January. We quote PGT, CGI, and ProVia side by side on paper so you see the actual difference. A fiberglass entry door in Bedford typically runs $1,200-$1,800 installed with framing correction included. Call (888) 635-0804 for your free estimate.
Look at the glass. If you see condensation between the two panes that won’t wipe off from either side, the seal has failed. In Bedford, double French doors take extra strain because the clay soil movement racks both slabs over time, which stresses the glass unit seals. A fogged seal is not something you can fix by re-caulking; the glass unit has to be replaced. On many Bedford French doors, the frame has also shifted, and replacing just the glass without re-squaring the opening means the new glass fails the same way. We check both before we quote. Call (888) 635-0804 and we’ll tell you what you’re looking at.
Yes, and we do it regularly in Bedford. A storm door installs on a surface-mounted frame that screws into the exterior brickmold or jamb, so the existing entry door stays in place. The one thing we check first is whether the entry door frame is racked. If it is, the storm door will bind too, because it hangs on the same opening. We’ll tell you before we install, and if the frame is square, the storm door job usually takes a single visit. Storm doors in Bedford run $450-$900 installed. Call (888) 635-0804 to schedule your free estimate.
Call TruePane for Door Installation in Bedford
If you live in Bedford and your door sticks in July, gaps in January, or just looks like it’s been there since 1978, call (888) 635-0804. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a free estimate, send a background-checked technician who knows Bedford’s clay-soil problems by name, and give you a written line-item price before any work starts. The Done Right Promise covers every job, and both warranty layers are registered in writing before our truck leaves your driveway. That’s the standard Dale Kessler put on the whiteboard, and we stand behind it on every door we hang in Bedford.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Bedford and the Mid-Cities since 2008.