Door Installation in Beverly Hills - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Beverly Hills

Door installation in Beverly Hills comes with a set of rules most contractors never see coming. We work inside those rules every week. A replacement door on a 1920s Spanish Colonial Revival in the flats south of Santa Monica Blvd needs one set of approvals. A pivot door on a hillside compound north of Sunset needs another, plus fire-rated glazing the city’s Very High Fire Hazard Severity Zone code demands. We pull the permits, clear the Architectural Commission, and set the door so it opens square in July and seals tight in a Santa Ana wind. Call (888) 635-0804 to talk through your project.

Call (888) 635-0804

Why TruePane Windows & Doors Is Beverly Hills’s Preferred Door Installation Company

We earned our place in Beverly Hills one permit at a time. Dale Kessler started TruePane in 2008 after watching too many out-of-true installs get covered up and too many warranties get voided on a technicality. The rule on his whiteboard has not changed since: if the pane is not true, the job is not done. Homeowners in the hills and the flats both call us because our crews show up uniformed, walk the lot before quoting, and know the difference between what LA City will approve and what Beverly Hills Building & Safety will flag. That difference has cost people full replacement jobs. We know it before we ever order the slab.

Our Door Installation team includes journeymen who have pulled hundreds of permits through Beverly Hills. We submit shop drawings to the Architectural Commission, register both manufacturer warranty layers in writing before the truck leaves the driveway, and back every job with our Done Right Promise. A live person answers the phone 24 hours a day, 7 days a week. You call, you get a tradesperson, not a voicemail tree.

Our Door Installation Services in Beverly Hills

Entry & Swing Doors

Entry doors in the Beverly Hills flats carry more weight than their hinges. The Architectural Commission reviews front elevations closely on contributing properties, which means your new door may need to match the original stile width, panel profile, and sightline. We quote thermally broken steel and fiberglass entry systems side by side with wood-veneer options on paper, so you see exactly what the commission will see. Most entry door replacements in Beverly Hills run $3,400-$8,600 depending on material and glazing. A custom matched steel unit with true divided lites lands at the upper end.

Double & French Doors

French doors on a 1930s Tudor in Beverly Hills often have sill depths that modern factory units do not replicate. We set the new sill to match the original height and profile, flash it properly at the threshold, and make sure both leaves close flush without a conflict at the meeting stile. Double French door installations here typically run $5,200-$11,500. On hillside lots with radiant west-facing exposure, we spec fiberglass over vinyl every time. Vinyl frames deform under that heat load, and you will feel the bind by the second summer.

Bifold & Folding Doors

Hillside compounds north of Sunset increasingly open their rear elevations with floor-to-ceiling glass pocket-wall systems. Those installations require structural header work on sloped, often cut-and-fill lots. We handle the engineering, the header replacement, and the door set as one scope, so the permit is not split between a structural contractor and a door crew. Bifold and folding door projects in Beverly Hills run $12,000-$28,000 depending on opening width and panel count. The fire-zone requirements north of Sunset add glazing cost that flatland projects never see.

Pivot Doors

Pivot doors are the request we hear most from Beverly Hills clients building or renovating. A 4-foot-wide by 9-foot-tall custom pivot door changes how a home feels the moment you walk in. It also changes the engineering. We order the slab from manufacturers who can hit the sizing, set the pivot hinge system to carry the dead load, and coordinate the Architectural Commission submittal so the profile does not get rejected. Custom pivot door installations in Beverly Hills run $9,500-$22,000. A crane lift for a heavy steel slab on a tight lot adds $1,800-$3,500.

Trusted Brands We Service in Beverly Hills

We are an authorized installer for PGT, CGI, CWS, and more than a dozen other manufacturer lines. That means we can quote a PGT impact-rated entry door or a CGI fire-rated system with the full warranty registered in writing, not promised over the phone. For Beverly Hills clients in the fire hazard zone north of Sunset, we spec CGI and CWS fire-rated assemblies that actually pass inspection. For flatland homes with historic overlay requirements, we work with manufacturers who can produce custom divided lites and deep sill profiles. You get the spec sheet, the price, and the warranty terms in writing before you sign anything.

Common Door Installation Problems We See in Beverly Hills Homes

• Architectural Commission rejection on a standard retrofit. A homeowner or a general contractor orders a standard nail-fin vinyl door, pulls the permit, and gets flagged because the replacement unit changed the divided-lite pattern or sill depth of the original 1930s casement. We see this more in the flats south of Santa Monica Blvd than anywhere else we work. The fix is shop drawings and a custom unit, which we handle from the start.
• Tight-lot staging that blocks a shared driveway. Beverly Hills lots are narrow, and the shared driveway between two 1920s homes is often the only access to both. If a truck or dumpster sits there without a pre-approved staging plan, someone calls code enforcement and the job stops. We stage materials in protected zones and coordinate access before we arrive.
• Vinyl frame deformation on south- and west-facing hillside elevations. The marine layer keeps flats comfortable, but hillside doors take intense radiant exposure. Vinyl frames warp, the door binds, and the seal fails within a few seasons. We spec fiberglass or thermally broken aluminum for those elevations, no argument.
• Unrated wood doors in the Very High Fire Hazard Severity Zone. Properties north of Sunset fall under California’s designations that require fire-rated glazing and ember-resistant door assemblies. A standard wood door will not pass inspection. We install what the code requires, and we register both manufacturer warranty layers in writing.

Pricing for Door Installation in Beverly Hills, CA

We Also Serve Cities Near Beverly Hills

TruePane installs doors throughout Beverly Hills and the surrounding communities. We regularly work in West Hollywood, Studio City, Universal City, and Culver City, where the permit process is different but our standard is not. If you live near Beverly Hills and need a door replaced or a new opening cut, call (888) 635-0804 and ask for our availability in your neighborhood.

How Beverly Hills’s Architectural Commission Changes What You Can Install

Here is the part most generic door advice misses. Beverly Hills is an independent municipality with its own Building & Safety Department and an Architectural Review process separate from both LA City and LA County. A replacement door that sails through LA City plan-check gets flagged in Beverly Hills if it changes the sightline profile of a contributing facade. The Commission can specifically reject a permit because the new unit does not replicate the divided-lite pattern or sill depth of the original 1930s casements. We saw this on a Spanish Colonial Revival in the flats south of Santa Monica Blvd. Our crew replaced a failed original steel casement entry door with a thermally broken steel unit that matched the true divided lite pattern and deep sill depth. Because the property sat within a historic overlay, we pulled permits through Beverly Hills Building & Safety, submitted shop drawings for Commission review, and coordinated a party-wall notice to the attached neighbor before we ever set a jamb. The install required a crane for the custom steel slab, a protected staging zone on the narrow lot, and flashing tape detailing that passed final inspection with zero corrections on the first pass.

That is the difference between a door company and a Beverly Hills door company. We know the commission’s sightline standards. We know that a vinyl retrofit slider will get sent back. We know what the fire-zone code demands north of Sunset. If you are reading this and wondering whether your proposed door will pass, call us and we will tell you the truth before you spend a dollar.

FAQs - Door Installation in Beverly Hills

Key Takeaways

• Beverly Hills is its own municipality with an Architectural Commission that can reject door permits for sightline or sill-depth changes.
• Hillside properties north of Sunset fall under fire-zone rules that require fire-rated glazing and ember-resistant door assemblies.
• Entry doors in Beverly Hills run $3,400-$8,600; French doors $5,200-$11,500; pivot doors $9,500-$22,000.
• We pull permits, coordinate party-wall notices, and stage tight lots without blocking shared driveways.
• Every job is covered by the Done Right Promise and both manufacturer warranty layers registered in writing.

Call TruePane Windows & Doors for Your Beverly Hills Door Installation

You have lived in your house for twenty years and you intend to stay. You know what a fogged seal and a binding door feel like in July. You do not need a contractor who will leave you with a second-rate install and a voided warranty. You need a crew that knows Beverly Hills’s rules, stages the job clean, sets the door true, and stands behind it in writing. That is who we are. Dale Kessler built this company on a principle: if the pane is not true, the job is not done. Call (888) 635-0804 for a free estimate and a square deal, in writing, before you sign anything.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Beverly Hills and surrounding Los Angeles communities since 2008.