Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Century City
Door installation in Century City almost always means working inside a high-rise condominium tower built between the 1960s and early 1990s, where the original aluminum frames have spent decades absorbing salt-laden marine air from Santa Monica Bay, three to four miles west. Entry door replacement here typically runs $1,800 to $6,500 installed, depending on whether the HOA requires a marine-grade frame, a custom architectural match, or exterior hoisting access. We know these buildings. We know their architectural committees, their elevator dimensions, and their corrosion patterns. If you live in Century City and your door binds, derails, or lets morning fog seep through, call us at (888) 635-0804 and we’ll send a technician who has worked in towers like yours.
Why TruePane Windows & Doors Is Century City’s Preferred Door Installation Company
TruePane was founded in 2008 by second-generation glazier Dale Kessler, who built the company on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That rule applies to every door we set in Century City, whether it’s a marine-grade entry door in a tower on Avenue of the Stars or a custom arched door in a penthouse off Constellation Boulevard.
Century City customers call us because we understand the building stock here. Nearly every residential project involves a shared building envelope, a common-area interface, and an HOA architectural committee that will not tolerate a mismatched door. Our technicians are background-checked, uniformed, and trained to work in occupied high-rise buildings without disrupting your neighbors. We coordinate freight elevator scheduling, loading dock permits, and swing-stage access with building management before the job starts, so you are not left negotiating logistics on installation day.
We carry the documentation your HOA will ask for: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves the driveway. That is The Keystone Standard, and it is written into every one of our Century City jobs. A live person answers our phone 24 hours a day, seven days a week. Not a call center. Someone who knows what a corroded sliding door track looks like on the 14th floor.
Our Door Installation Services in Century City
Our Door Installation team handles the full range of residential door work in Century City’s high-rise buildings, from single entry doors to custom architectural replacements that must pass HOA review. Here is what we do most often here:
Entry & Swing Doors
In Century City condominium towers, entry doors are not just doors. They are fire-rated assemblies, sound barriers, and the first thing your HOA architectural committee sees when they walk down the hall. We install swing doors sized to the opening, with weatherstripping specified for the coastal marine layer that sits over Century City most mornings. Expect $1,800 to $5,200 for a standard replacement, and more if your building requires a custom veneer or specific hardware finish.
Double & French Doors
French doors are common in Century City units that open onto balconies or terraces facing the Pacific. Salt air attacks the aluminum thresholds and hinge hardware on the originals, which were not built to modern coastal corrosion standards. We replace them with marine-grade frames and stainless hardware, and we seal the jamb properly so the next 30 years of fog do not do what the last 30 did. Typical cost: $3,200 to $8,000 installed, depending on width and whether exterior access is required.
Bifold & Folding Doors
Bifold and folding door systems in Century City’s newer luxury towers often fail at the track, especially on units facing west toward the marine layer. We realign, replace rollers, or install full new systems when the existing frame is beyond service. Folding door replacement in Century City typically ranges from $4,000 to $12,000, and we coordinate hoisting when panels cannot fit in the building elevator.
Pivot Doors
Pivot doors are increasingly popular in Century City’s renovated penthouses and premium units. They require precise floor and header alignment; a pivot door that is out of true by half a degree will scrape or bind. We measure twice, build to the opening, and register both warranty layers before we leave. Pivot door installation in Century City generally runs $4,500 to $15,000 depending on size, material, and access.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Century City
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows, all of which produce marine-grade and high-rise appropriate door systems. When a Century City HOA approves a specific brand and model for building-wide uniformity, we quote it side by side with comparable options on paper so you see exactly what you are buying. We stock common parts for older aluminum systems in the area, which means faster turnaround when your HOA deadline is tight.
Common Door Installation Problems We See in Century City Homes
- Corroded aluminum sliding door tracks. The salt-laden air from Santa Monica Bay, only three to four miles away, eats aluminum tracks far faster in Century City than in inland Westside neighborhoods like Culver City or West Hollywood. Rollers bind, panels derail, and the fix is usually a full track replacement, not a hardware swap.
- Failed thermal seals causing fog and hidden rot. Original single-pane picture windows and door sidelights from the 1970s lose their seals, fog between panes, and trap moisture in the surrounding jamb. By the time you see condensation, the wood or composite framing behind the door may already be soft.
- Rapid weatherstripping deterioration. Persistent morning fog and high humidity through the coastal marine layer corridor wear out door weatherstripping in Century City faster than in drier inland neighborhoods. Air leaks follow, and the building envelope loses integrity one door at a time.
- HOA architectural committee compliance failures. We regularly meet Century City residents who bought a door that looked close enough but was rejected because the finish, glass tint, or hardware did not match the building standard. That is an expensive mistake. We verify HOA spec before ordering anything.
Pricing for Door Installation in Century City, CA
Door installation in Century City costs more than the same job in a single-family neighborhood, and there is a reason: you are paying for marine-grade materials and high-rise logistics. A basic entry door replacement here starts around $1,800, while a full custom pivot door with exterior hoisting can reach $15,000. French doors run $3,200 to $8,000, bifold systems $4,000 to $12,000, and arched or custom doors typically $3,500 to $10,000 depending on the radius and framing. The cheap inland-spec door is less expensive the day you sign, but in Century City’s salt air it corrodes within a decade. We quote the coastal-spec version from the start. Call (888) 635-0804 for a free estimate and a written, line-item price with no change orders.
We Also Serve Cities Near Century City
Our crews serve Century City and the surrounding Westside communities, including Parkway, Arden-Arcade, Ladera Heights, and Commerce. If you live just outside Century City’s towers but face the same marine layer issues, we’ll bring the same marine-grade spec and the same written warranty registration to your door. Scheduling is coordinated from our Los Angeles office, and crews dispatch to Century City daily.
Serving Century City, CA - Our Local Coverage Area
We’re based in the Century City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Century City
Century City sits 3 to 4 miles from Santa Monica Bay, directly in the coastal marine layer corridor. Salt-laden air and persistent morning fog settle on aluminum frames and hardware year-round, corroding tracks and rollers decades faster than in Beverly Hills, where elevation and distance from the immediate coast reduce salt exposure. In the original 1960s to 1980s towers along Avenue of the Stars and surrounding streets, the aluminum was not specified for coastal conditions, so full track replacement is common. Call (888) 635-0804 and we’ll inspect your track and give you a straight answer on repair versus replacement.
Most Century City condominium HOAs require replacement doors to match the building’s original architectural finish for visual uniformity, and many specify particular hardware finishes, glass tints, and even approved manufacturers. We review your HOA’s architectural guidelines before ordering anything, and we provide the documentation committee members ask for, including finish samples and warranty registration. This avoids the expensive mistake of installing a door the board rejects. For an exact quote that accounts for your building’s rules, call (888) 635-0804.
Most building elevators in Century City cannot accommodate a full-size sliding glass door panel. We coordinate with building management to schedule exterior swing-stage access or a hoist, then bring the panel up the outside of the building to your floor. In one tower on Avenue of the Stars, we replaced a 1970s sliding door whose track had corroded so badly the panel derailed and jammed open. The replacement panel was too large for the elevator, so our crew hoisted it to the 18th floor via swing-stage, set a marine-grade aluminum frame with stainless steel rollers, and sealed the jamb with flashing tape to block salt intrusion. That is standard practice for us here.
The thermal seal in the original insulated glass unit has failed, allowing moisture-laden air from Century City’s humid marine layer to enter the space between the panes and condense. The seal failure is usually due to age plus corrosion, and it typically means the glass unit needs replacement, not repair. Left unaddressed, the trapped moisture can rot the surrounding jamb and frame. Call (888) 635-0804 to have a technician measure the unit and check the surrounding framing before ordering replacement glass.
In nearly every Century City condominium building, your HOA’s architectural committee has final say, and many require specific brands, finishes, or performance ratings to preserve building-wide uniformity. As an authorized installer for lines including PGT, CGI, and ES Windows, we can quote your HOA’s approved option side by side with comparable alternatives on paper, so you understand the difference before you commit. If your building allows flexibility, we’ll recommend a marine-grade system that will actually hold up to the salt air. Estimates are free; call (888) 635-0804.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Century City and the surrounding communities. If the pane is not true, the job is not done.