Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Cypress
Impact Windows & Doors - Cypress installation runs $1,200-$6,800 for most homes, depending on whether you’re replacing an original hollow-core slab or ordering a custom arched entry system. TruePane Windows & Doors handles the full range, from a straightforward entry door swap to a fully custom Pella Architect Series installation with matching sidelites. We coordinate design, permits, and millwork lead times so the project doesn’t stall halfway through. If you’re in Cypress and want a written line-item quote before anything gets ordered, call (888) 635-0804.
We know Cypress well. The tract homes built between 1956 and the mid-1970s dominate the ZIP, and most still carry their original single-pane aluminum sliders and hollow-core exterior doors. That matters because the salt-laden marine air rolling in from Seal Beach, just 5-7 miles west, pits aluminum frames and corrodes thresholds faster than anything you’d see in Yorba Linda or Anaheim Hills. Our Door Installation team has replaced enough of these assemblies to know exactly what’s behind the jamb before we open the wall.
Why TruePane Windows & Doors Is Cypress’s Preferred Door Installation Company
Cypress homeowners tend to stay put for decades. They remember the contractor who left them with a door that binds every June and won’t return calls. We’ve built our reputation in this ZIP on showing up when we say we will, measuring every opening twice, and registering both manufacturer warranty layers in writing before the truck leaves the driveway. That’s The Keystone Standard, and it applies to every job we do in Cypress.
Dale Kessler founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. It still governs every install. Our technicians are background-checked, uniformed, and trained as apprentices before they ever run a job alone. When we send a crew to a Cypress home near the Los Alamitos edge or up toward the 605 corridor, the homeowner gets the same standard: a square deal, written pricing, and workmanship we stand behind with a Done Right Promise.
We’re not the cheapest bid in Cypress. We’re the last call you should need to make on a door. A live person answers our phone 24 hours a day, 7 days a week, not a voicemail tree. If you have a question about a quote, a lead time, or a threshold that’s failed, you reach a person who knows your street and your home’s era of construction.
Scheduling and dispatch are coordinated from our Houston-area office, but the crews serving Cypress work this market every week. We know the neighborhoods, the permit office, and the Title 24 field inspectors. That local coordination keeps projects moving.
Our Door Installation Services in Cypress
Entry & Swing Doors
A new entry door in Cypress typically runs $1,400-$4,200 installed, and the wide range comes down to material and custom sizing. Most of the original doors in this ZIP are hollow-core slabs with pitted aluminum jambs and failed weatherstripping. We replace them with solid-core or insulated fiberglass doors, often adding low-E glass and a fusion-welded frame, as part of our Energy-Efficient Windows - Cypress approach. Title 24 compliance is part of every permitted entry door replacement we do.
Double & French Doors
French door installations in Cypress run $2,800-$7,500 depending on configuration, glass package, and whether the opening needs re-framing. We see a lot of original aluminum Sliding & Patio Doors in Cypress being retrofitted into French door swings, especially on homes where the old threshold has corroded from salt-air exposure. We order the door to the rough opening, not the other way around, which eliminates the shim jobs and air leaks that plague cut-rate installs.
We carry PGT, CGI, and ES Windows lines for Cypress customers, and we’ll quote them side by side on paper so you see exactly what you’re buying. No surprises on the bill, and no second appointment left hanging.
Bifold & Folding Doors
Bifold and folding door systems in Cypress start around $3,500 and run upward of $8,000 for larger multi-panel spans with custom glazing. These are structural openings, not simple door swaps. We coordinate the header engineering, order the track system to spec, and schedule the install around manufacturer lead times, not the other way around. The mild but persistently moist marine climate in this ZIP makes thermal-break frames the practical standard, not an upsell.
Pivot Doors
A custom pivot door for a Cypress remodel runs $3,800-$8,500 installed, with the price set in writing before anything is ordered. Pivot hinges carry the entire door’s weight differently than butt hinges, and the clearances have to be right or the door binds on the first humid June afternoon. Our carpenters set the pivot box, hang the slab, and adjust the sweep to hold against Cypress’s overnight condensation swings. We also handle the Title 24 compliance certificate for permitted pivot door installations.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cypress
We’re an authorized installer for PGT, CGI, CWS, and ES Windows, and we stock common replacement hardware and threshold components for Cypress homes. That means if a composite sweep fails or a roller track needs resetting, we’re usually not waiting on a shipment from out of state. We quote manufacturer lines side by side on paper, register both warranty layers in writing before the truck leaves, and match the product to the specific moisture and corrosion conditions of this ZIP.
Common Door Installation Problems We See in Cypress Homes
- Salt-air pitting on aluminum jambs and thresholds. Homes nearest Seal Beach and Los Alamitos show visible white oxidation within a few years of any paint failure. This is the signature Cypress failure pattern, and it’s why we recommend vinyl or thermally broken frames instead of aluminum-to-aluminum swaps.
- Hollow-core doors swelling shut every June. The coastal humidity swings in Cypress push wood door stiles and rails out of alignment seasonally. Failed weatherstripping follows, then salt-laden air gets into the threshold and corrosion accelerates.
- Fogged double-pane glass on original French doors. The marine-influence condensation in this ZIP kills old seals quickly. If you have fog between the panes, the sealed unit has failed and it’s a glass replacement, not a cleaning issue.
- Title 24 compliance failures on replacement doors. Cypress sits under California’s Title 24 Part 6 energy requirements. If the U-factor and SHGC on the replacement glazing don’t match the climate zone, the permitted installation fails inspection. We document the compliance paperwork as part of the job.
Pricing for Door Installation in Cypress, TX
A typical entry or swing door replacement in Cypress runs $1,400-$4,200. Double and French doors run $2,800-$7,500. Bifold and folding systems start around $3,500 and go up from there. Custom pivot and arched entry doors run $3,800-$8,500, with the price locked in writing before we order the slab. What moves the number is the material spec, the glass package, whether the rough opening needs re-framing, and the millwork lead time. Labor is not the driver on high-end Cypress jobs. Custom millwork lead times are. We set the schedule around the order date and give you the quoted price before anything gets purchased. Call (888) 635-0804 for a free written estimate.
We Also Serve Cities Near Cypress
TruePane’s door installation crews serve Cypress and the surrounding communities including Barker, Katy, North Houston, and Alief. Our Door Installation team coordinates scheduling from a single dispatch point, so appointments in adjacent ZIP codes are handled with the same written pricing and warranty registration as every Cypress job. If you’re on the edge of the service area, call (888) 635-0804 and we’ll confirm coverage.
Serving Cypress, TX - Our Local Coverage Area
We’re based in the Cypress area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Cypress
Because Cypress sits 5-7 miles from Seal Beach, the marine air here carries enough salt to accelerate aluminum corrosion whenever a paint failure exposes raw metal. In drier inland cities, aluminum frames still oxidize eventually, but the process is far slower. In Cypress, you’ll see white pitting on original door frames within a few years of losing the factory finish. This is why we recommend thermally broken vinyl or composite frames for replacement work in this ZIP, not aluminum-to-aluminum swaps. Call (888) 635-0804 and we’ll inspect your jamb and quote the right material for your home’s exposure.
Yes. Any permitted replacement door in Cypress must meet California’s Title 24 Part 6 energy requirements, including U-factor and SHGC for the glazing you select. A custom pivot door with a large glass lite can fail compliance if the glass package is mismatched to this marine climate zone. We document the compliance certificate as part of the installation and register it with the manufacturer warranty paperwork. Call (888) 635-0804 to have your door spec reviewed against Title 24 before you order.
A custom arched entry door in Cypress typically takes 10-16 weeks from final measure to installation, driven almost entirely by manufacturer millwork lead time. The labor itself usually takes a single day, or two if we’re re-framing the opening. Custom millwork from Pella, CGI, or ES Windows is built to order, and the design, glass, and finish options all add days to the build. We set the schedule around the order date and lock the price in writing before anything is purchased, so you’re not losing months to avoidable delays. Call (888) 635-0804 to start the measure-and-quote process.
In most cases, yes. The fog means the sealed unit has failed and moisture is now inside the insulated glass, which is common in Cypress due to our marine-influence condensation cycles. If the door frame and hardware are still sound, we can order and install a replacement insulated glass unit matched to the original U-factor and SHGC, keeping the door Title 24 compliant. If the frame itself is pitted or the threshold is corroded, a full door replacement may be the better long-term fix. Call (888) 635-0804 for a free evaluation.
The June Gloom marine layer and overnight coastal humidity cause the wood stiles and rails on original hollow-core doors to absorb moisture and expand, which binds the door against the jamb. This is a widespread issue in Cypress’s 1960s-1970s tract homes, especially where weatherstripping has already failed and the aluminum threshold has begun to pit. The permanent fix is a solid-core or insulated replacement with a properly set sweep and new weatherstripping rated for marine humidity. Call (888) 635-0804 and we’ll quote the replacement in writing.
Schedule Your Door Installation in Cypress
If you’re ready for a door that seals tight against Cypress’s coastal air and holds its finish for decades, call (888) 635-0804. We’ll give you a free, written line-item estimate, walk you through the brand options side by side, and register both warranty layers in writing before any work starts. Dale Kessler and the entire TruePane team stand behind every install in Cypress with a Done Right Promise. No paperwork fights, no arguing, no fine print that covers neither.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Cypress with door installation and replacement craftsmanship backed by The Keystone Standard.