Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Dripping Springs
Door installation in Dripping Springs runs $1,200 to $4,800 for a standard entry door replacement, and $3,500 to $12,000 for custom or fire-rated work on acreage lots west of US-290. Most jobs are completed in a single visit. We know the difference between a production-build door in Caliterra that warped in three Hill Country summers and a 1980s ranch house off FM 1826 that needs a full jamb rebuild. If you live in 78620 and your door binds, leaks cedar pollen, or won’t latch when the wind picks up off the Balcones Escarpment, call (888) 635-0804 for a free on-site estimate. We will measure twice, quote on paper, and register both warranty layers before the truck leaves your driveway.
Why TruePane Windows & Doors Is Dripping Springs’s Preferred Door Installation Company
We are a second-generation glazier operation, founded by Dale Kessler, with years of community service behind the name. The work is covered by a Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, no paperwork fights. A live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. When a homeowner in Headwaters calls about a door that will not latch before a holiday weekend, they talk to a person who can get a background-checked, uniformed technician scheduled.
Dripping Springs sits in Hays County’s Wildland-Urban Interface. That is not a marketing phrase. Many lots west of US-290 along cedar-covered ridgelines fall under adopted WUI construction standards requiring ignition-resistant assemblies. A door replacement out there can legally require fire-rated glazing and tested framing that a contractor unfamiliar with local code will miss entirely. We scope that before we quote, not after the inspector shows up.
Coordinating from our Austin office, our crews serve Dripping Springs locally. We know the roads, the mud after a monsoon-season rain, the long gravel driveways off Ranch Road 12, and the gate codes at Caliterra and Headwaters. Our Door Installation team works in your home the way they would work in their own mother’s.
Our Door Installation Services in Dripping Springs
Entry & Swing Doors
A front entry door in Dripping Springs has to do more than open and close. It has to stand up to months of intense UV on the Edwards Plateau, wind-driven cedar pollen from December through February, and the kind of heat that warps cheap fiberglass skins in two or three seasons. We install entry and swing doors with fusion-welded frames, proper sill pans, and flashing tape at the jamb. If your current door is a builder-grade slab from a 2010s production build, there is a good chance it is already delaminating at the bottom rail.
Double & French Doors
Double and French doors are common on Hill Country patio entries and master retreats, especially on stone-and-metal-roof homes built during the 2010-2023 sprawl boom. The weak points are the astragal, the weatherstripping between the two panels, and the threshold. When wind comes out of the southwest, it finds those gaps. We set double doors with proper reveals, replace worn astragals, and use adjustable thresholds so both panels close square and stay sealed.
Bifold & Folding Doors
Bifold and folding door systems are popular on covered back patios and pool houses across 78620. They are heavy, and on an acreage lot the access matters. A standard box truck cannot always get to the back of a property off a muddy ranch road. We stage materials on a pickup and hand-carry the last stretch. That is not a problem we complain about. It is a problem we solve before the quote is written.
Pivot Doors
Pivot doors are showpieces. They are also heavy, expensive, and unforgiving if the hinge system is not perfectly aligned. On a new build or a full remodel, a pivot door changes the framing and the header load. On a detached shop or ADU, it can conflict with septic and well setbacks that force the door to a different wall than the drainage plan wants. We scope all of that before we quote. You see the real number up front.
We also handle storm doors, arched and custom doors, and full replacement of sidelights and transoms. If it swings, slides, or seals, we install it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dripping Springs
We are an authorized installer for more than a dozen manufacturer lines. On Dripping Springs doors, we most often quote Marvin, Andersen, and Pella side by side so you see the real difference in frame material, glazing, and warranty, not a sales pitch. For impact and fire-rated work, we pull from PGT and CGI. For custom arched or oversized openings on acreage builds, we have worked with ES Windows. We stock common hardware and weatherstripping parts for local callbacks, which keeps repairs on Dripping Springs doors from dragging across two appointments.
Common Door Installation Problems We See in Dripping Springs Homes
- Warped builder-grade slabs in production homes. Homes built in master-planned communities like Caliterra and Headwaters between 2010 and 2023 shipped with inexpensive entry doors. After eight to fifteen years of extreme UV and wide seasonal temperature swings, the slabs twist and the weatherstripping crushes. The door stops sealing.
- Cedar pollen intrusion at the threshold. Juniperus ashei peaks December through February. Fine mountain-cedar pollen pushes through any gap in the door weatherstripping, especially on west-facing entries that catch prevailing southwest winds.
- Jamb rot from missing sill flashing. Production builds often skip flashing tape at the sill. On a Hill Country lot where monsoon-season rain pools at the base of a door, that jamb rots within a few seasons. We see it on back patio doors and garage entry doors more than anywhere else.
- Out-swing vs. in-swing conflicts on acreage. Septic and well setbacks on multi-acre parcels can force a new outbuilding or ADU door onto a wall that does not align with drainage. If the door swings the wrong way, runoff channels straight into the threshold. We configure swing direction and sill pan before the first hole is drilled.
Pricing for Door Installation in Dripping Springs, TX
A standard entry door replacement in Dripping Springs runs $1,200 to $3,200 for the door, labor, and disposal of the old unit. Fiberglass entry systems with sidelights start around $3,000 and can reach $6,000 on a wide opening. Double French door replacement runs $2,800 to $7,500 depending on size and glazing. Pivot doors start at $4,500 and climb from there, especially when the header needs reframing. Fire-rated WUI-compliant doors west of US-290 add $800 to $2,500 over a standard unit, depending on the glazing and frame rating.
| Door Type | Dripping Springs Price Range |
|---|---|
| Standard entry door replacement | $1,200 - $3,200 |
| Fiberglass entry with sidelights | $3,000 - $6,000 |
| Double French door replacement | $2,800 - $7,500 |
| Storm door | $400 - $1,100 |
| Pivot door | $4,500 - $12,000+ |
| WUI fire-rated door upgrade | +$800 - $2,500 |
What changes the price: fire ratings on ridgeline lots, custom sizes on older ranch houses, reframing for rot, and access. Long driveways and muddy ranch roads add labor because we hand-carry materials the last stretch. We quote all of it on paper before work starts. Call (888) 635-0804 to schedule your free estimate.
We Also Serve Cities Near Dripping Springs
Beyond 78620, our crews cover Driftwood, Spicewood, San Marcos, and Manchaca. The same pricing structure, the same Done Right Promise, and the same live person on the phone. Learn more about our local coverage on our Dripping Springs page.
Serving Dripping Springs, TX - Our Local Coverage Area
We’re based in the Dripping Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Dripping Springs
If your lot is inside a designated Wildland-Urban Interface zone, Hays County code may require an ignition-resistant door assembly, which includes fire-rated glazing and tested framing. Not every lot west of US-290 falls inside the WUI boundary, so we verify your specific address against the adopted map before quoting. Call (888) 635-0804 and we will check your lot.
The doors installed in Dripping Springs production builds during the 2010-2023 boom were often inexpensive fiberglass or thin steel slabs with low-quality edge seals and minimal flashing. The UV load on the Edwards Plateau bleaches and warps the skins faster than in lower-lying markets, and the seasonal temperature swings flex the slab until it no longer seats in the jamb. Most of these doors hit failure at the eight to fifteen-year mark. The fix is a properly flashed replacement with a fusion-welded frame and good weatherstripping, not another builder-grade slab.
It depends on where the setbacks force the door. A pivot door needs substantial header support and a wide swing radius. If the only buildable wall faces an upslope or a drainage swale, an out-swing configuration may be required and may need a custom sill pan to keep runoff out. We scope setback lines and drainage before we quote, so you are not paying for a door that fails inspection. Call (888) 635-0804 for a site walk.
A properly installed storm door with tight weatherstripping will significantly reduce cedar pollen intrusion and wind-driven rain on a west-facing entry. It is not a substitute for fixing a warped primary door, but it buys time and keeps the foyer cleaner during Juniperus ashei season. We install storm doors in the $400 to $1,100 range depending on size and glass type.
An insulated glass unit is two panes sealed together with a spacer, with air or gas between them. Argon fill improves thermal performance, and low-E coating reflects heat while letting light through. On a Dripping Springs door that catches afternoon sun, the difference shows up inside within the first summer. Call (888) 635-0804 and we will quote low-E argon units side by side with standard glass.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Dripping Springs with honest door installation and the Done Right Promise.