Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Durham
Door installation in Durham, CA runs $800-$4,500 for a standard exterior door replacement, with custom and arched doors typically landing between $3,000 and $12,000 depending on millwork, glass, and frame requirements. We serve all of Durham including the 95938 zip code, with crews that know Durham-Dayton Highway, the Midway corridor, and the farmhouse pockets north of town without needing a map open. Call (888) 635-0804 to schedule a free estimate. A live person answers, 24 hours a day, every day.
Durham’s housing stock was not built for the Sacramento Valley’s fog-belt weather cycle. Most of the homes here went up between the 1940s and 1970s, framed with solid-core wood doors and Energy-Efficient Windows in Durham can address the single-pane glass that has now endured fifty to eighty years of Tule fog winters and 105°F summers. That is exactly the kind of work our crews handle most often in Durham, and it is why our Door Installation team sizes, flashes, and specifies every slab for this valley’s specific conditions rather than pulling a stock unit off a shelf.
Why TruePane Windows & Doors Is Durham’s Preferred Door Installation Company
We have been in the Durham area long enough to know that a door that fits perfectly in Chico will bind in Durham by February. The fog here sits longer, the humidity stays higher, and the older farmhouse frames were mostly set without sill flashing or any real air-sealing. Our technicians grew up working on these exact homes, and they measure every rough opening twice before ordering anything.
Dale Kessler founded TruePane in 2008 on a rule that has not changed: if the pane is not true, the job is not done. That standard applies to every door we set in Durham. It means the threshold is flashed before the jamb goes in. It means the slab is shimmed square against the opening, not against whatever the old frame happened to be doing. And it means both manufacturer warranty layers are registered in writing before the truck leaves your driveway. That is The Keystone Standard, and it is on every quote we write in Durham.
Background-checked, uniformed technicians handle every job. We sponsor county fairs and church roof funds in Butte County because we plan to be here in thirty years. When a Durham customer calls with a door that started binding after a fog spell, we show up, we diagnose it, and if it was our install, we make it right under the Done Right Promise. No paperwork fights, no arguing.
Our Door Installation Services in Durham
We install, replace, and service doors across every part of Durham. Here is what that actually covers, and how each applies to the homes around here.
Entry & Swing Doors
Impact Windows & Doors in Durham are built for entry doors that take a beating that doors in drier parts of the state never see. A solid wood slab on a 1960s farmhouse will soak up fog moisture from November through February, swell against the jamb, and then shrink back by July, leaving a quarter-inch gap where weatherstripping used to make contact. We replace those slabs with thermally reinforced fiberglass or properly sealed solid wood systems, and we rebuild the rough opening so the frame is flashed and drained for this valley’s moisture cycle. Most Durham entry door replacements are done in a single visit.
Double & French Doors
Double French doors on older Durham homes often fail at the astragal, the center joint where the two slabs meet. Fog-season humidity swells the meeting stiles, and once they bind once, the alignment is never quite the same. We set French doors with a continuous threshold and a properly engineered center seal, and we quote the door as a full system, frame and all, so the panels move independently without fighting each other.
Bifold & Folding Doors
Sliding & Patio Doors - Durham projects often involve bifold doors, which show up most often on patio openings and between living rooms and covered porches. The original installations from the 1970s and 1980s rarely had any head flashing, so the top tracks corrode and the panels start to drag. We replace the track, reset the header, and install a modern bifold system with sealed bearings and adjustable hinges that will not seize after the first winter.
Pivot Doors
Pivot doors are a different animal, and they are becoming more common on newer rebuilds in the Durham area after the Camp Fire construction wave. A pivot door hangs from a top and bottom hinge mechanism instead of side hinges, which means it can carry heavier glass and wider slabs. But a pivot door installed without accounting for Durham’s seasonal frame movement will start to scrape the floor by August and bind at the header in January. We specify pivot systems with adjustable pivots and reinforced headers sized for this climate, and we walk every customer through the maintenance honestly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Durham
We are an authorized installer for more than a dozen manufacturer lines, including, and Door Installation and window products from PGT, CGI, and ES Windows. For Durham homeowners, that matters in two ways. First, you get a side-by-side quote on paper showing exactly what each manufacturer line costs and why the price differs. Second, when a warranty claim comes up, we are an authorized dealer, which means we handle the claim with the factory directly instead of handing you a 1-800 number. Most warranty parts for PGT and CGI arrive within a week, and we stock common seals, sills, and weatherstripping locally so a minor adjustment does not wait on a freight truck.
Common Door Installation Problems We See in Durham Homes
- Fog-season swelling, summer shrinking. Solid wood door slabs on Durham’s older farmhouses absorb Tule fog moisture for weeks at a time, swell until they bind against the jamb, then shrink back in the 105°F summer and leave visible gaps. Weatherstripping alone will not fix this because the problem is the slab material and the frame sizing, not the seal.
- Rotted jamb corners from missing sill flashing. Mid-century Durham farmhouses were typically framed without any sill pan or flashing tape under the door threshold. Fog moisture wicks up from the concrete slab or wood subfloor into the jamb, and within a decade the bottom corners are soft enough to push a screwdriver through. We replace the jamb, flash the sill properly, and set the new door on a drained threshold.
- Sealed glass failure on custom millwork. Designer-driven projects in Durham sometimes arrive with beautiful custom wood doors and architectural glass that were never sealed for a fog belt. The first Tule fog season causes finish checking on the millwork and seal failure in the insulated glass. We re-specify those doors with climate-appropriate sealants and UV-stable finishes before installation.
- Old sliding patio doors off their tracks. The aluminum sliders installed on Durham patios in the 1970s and 1980s have rollers that are decades past their service life, and the tracks fill with valley dust every summer. We replace the roller assemblies, realign the panels, and rebuild the track bedding so the door slides without lifting.
Pricing for Door Installation in Durham, CA
Here are real numbers for Durham, not national averages. A standard entry door replacement, including tear-out, new slab, new frame, flashing, and hardware, runs $800-$4,500 depending on material and glass. A double French door system typically lands between $2,500 and $7,500. Custom arched doors, which are common on the older farmhouses here, run $3,000-$12,000 because the millwork is built to order and the rough opening almost always needs structural modification. Bifold and folding door systems range from $2,000 to $9,000 depending on panel count and glass. A pivot door installation, including the reinforced header and adjustable pivot hardware, starts around $4,500 and goes up from there.
What actually drives the higher end in Durham is the crown detail, the glass lites, and the millwork profile, not the labor to hang it. We quote the full number in writing before ordering anything, and that number does not change at the end of the job. No change orders, no added line items. Call (888) 635-0804 for a free, written estimate on any door in Durham.
We Also Serve Cities Near Durham
Beyond Door Installation in Durham, our crews run regular routes to Chico, Paradise, Oroville, and Palermo. If you live just outside the Durham line, we can usually schedule within the same week, and the same crew that knows the fog-belt door problems in Durham will be the one that shows up at your door.
Serving Durham, CA - Our Local Coverage Area
We’re based in the Durham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Durham
No, weatherstripping will not fix it. Durham sits in the Sacramento Valley’s Tule fog belt, where winter fog keeps humidity and surface moisture on door slabs for weeks at a time. Solid wood doors absorb that moisture, swell against the jamb, and bind. In summer the wood shrinks back and leaves gaps. The real fix is replacing the slab with a thermally stable material like reinforced fiberglass, rebuilding the rough opening with proper flashing and drainage, and sizing the door for this valley’s seasonal movement. Call (888) 635-0804 for an assessment.
Yes. We do a lot of arched door work on the older farmhouses around Durham, and the goal is always to match the original millwork profile and glass pattern, not replace it with something modern. We take field dimensions of the existing arch, match the curve radius, and order a custom slab from a manufacturer line that can match the wood species and finish. The new door will look period-correct but will include modern flashing, a thermally stable core, and sealed insulated glass where the original had single panes. Call for a quote with the arch measured on site.
A pivot door can work in Durham, but only if it is specified for the climate. The problem is the same as with any door here: the rough opening moves slightly between fog season and summer heat, and a pivot door that is set tight in January will scrape the floor by August. We install pivot systems with adjustable pivot pins and a reinforced header that allows for seasonal correction, and we recommend a thermally broken pivot hinge and an insulated slab. If you want a pivot door, bring us in before the design is finalized so the rough opening is framed correctly. Call (888) 635-0804 to talk it through.
Expect 6-10 weeks for a factory-built entry door from Marvin or Andersen if it is a standard size and configuration. Custom sizes, arched tops, or specialty glass push lead times to 10-14 weeks. The labor to install it is one day once it arrives. We quote the full price in writing when you order, and we do not ask for the final payment until the door is hung, flashed, and operating. Call (888) 635-0804 and we will give you a realistic date for the exact door you want.
Surface fog on the exterior of the glass during a cold Durham morning is normal condensation and clears as the day warms. But if the fog is between the two panes of the insulated glass unit, and it does not wipe off from either side, the seal has failed. You will likely also see a hazy film or white residue inside the unit. Seal failure means the argon or krypton gas fill has escaped and the glass is no longer insulating. The fix is a new insulated glass unit, not a new door, in most cases. We can measure the existing unit and order a replacement from the same manufacturer. Call (888) 635-0804 for a glass assessment in Durham.
Contact TruePane Windows & Doors in Durham
We are not the cheapest bid in Durham, and we are fine with that. We are the last call a homeowner needs to make on a window or door. Every job gets the Done Right Promise, The Keystone Standard with both warranty layers registered in writing, and a phone number that a live person answers 24 hours a day. If you have a door that binds every January, a jamb that has gone soft, or a custom project on the drawing board, call (888) 635-0804 to schedule your free estimate. We will measure twice, quote you side by side on paper, and stand behind the work in writing. Dispatch and scheduling are coordinated from our Sacramento office; crews serve Durham locally.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Durham since 2008.