Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Foster City
Door installation in Foster City comes with a set of conditions most Peninsula contractors never deal with. The entire city sits on compacted Bay fill, the lagoons wrap around nearly every neighborhood, and the housing stock dates to a narrow window between 1968 and 1985. That means original aluminum frames, salt-air corrosion, and door openings that have drifted out of square over fifty years of subtle settlement. We handle all of it. If you’re in Foster City and need an entry door, patio slider, or storm door installed, call (888) 635-0804 and we’ll send a technician who knows exactly what your walls are going to tell us when we open them.
Why TruePane Windows & Doors Is Foster City’s Preferred Door Installation Company
We’ve done enough door work in Foster City to know what’s behind the drywall before we cut into it. The homes here were built to a 1970s standard: aluminum sliders, single-pane glass, and door openings framed for materials nobody uses anymore. When a Foster City homeowner calls us about a binding exterior door or a patio slider that won’t track, we already know the rough opening is probably racked. We check that first.
Our Door Installation team carries the full set of skills for this particular housing stock: re-squaring rough openings, replacing corroded thresholds, flashing against salt air, and registering both manufacturer warranty layers before we leave the driveway. That last part matters here more than almost anywhere else. The lagoon air shortens hardware life. The warranty paperwork is what protects you when it does.
Dale Kessler founded this company because he kept seeing installs that were out of true and warranties that got voided by paperwork nobody filed. That’s why every job gets the Done Right Promise and The Keystone Standard. No arguing. No fine print that covers neither.
We’re an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper so you see the actual numbers. A live person answers the phone 24 hours a day. If you call on a Tuesday morning or a Saturday night, you get us, not a voicemail tree.
Our Door Installation Services in Foster City
Entry & Swing Doors
Entry doors in Foster City take a beating from the marine layer and the salt-laden breeze off the lagoons. We install fiberglass and steel entry doors with composite jambs that won’t rot, weatherstripping that holds up to humidity, and thresholds sealed correctly against standing moisture. If your current door binds at the top corner or gaps at the latch, the problem is usually the rough opening, not the door slab. We fix the opening first.
Patio Slider Doors
The original aluminum patio sliders in Foster City are now well past their service life. We see failed glazing seals, corroded tracks, and rollers that have ground themselves flat. We install modern vinyl and fiberglass sliders with argon-filled low-E glass that cuts the fog-condensation problem and keeps lagoon air out. On lagoon-fronting homes, we use flashing tape at every penetration and double-check the drain plane before the interior trim goes back on.
Storm Doors
Storm doors make a lot of sense in Foster City, where wind rips across the open water and drives rain against entry doors from multiple directions. A properly installed storm door with a full-length tempered glass insert and an adjustable closer takes the brunt of that weather and extends the life of your main entry door. We stock a range of widths and handle the fit on older frames that have drifted out of square.
Double & French Doors
Double doors on Foster City homes present a compounding problem: settlement affects each side of the opening slightly differently, so the two panels won’t meet in the middle the way they did in 1975. We re-square the entire opening, install a one-piece threshold, and set both panels with the hinges and astragal you actually need for coastal humidity. This is one of the more common fixes we do on lagoon-side homes.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Foster City
We’re an authorized installer for more than a dozen manufacturer lines, and for Foster City homeowners we commonly quote, and PGT. Milgard vinyl holds up well in coastal air, Andersen offers fiberglass entry doors that won’t corrode, and PGT makes impact-rated products if you want added storm protection. We also service existing doors from Ply Gem and CWS when repair is the better call. Parts come from our local stock where possible, so a threshold or weatherstripping replacement doesn’t wait on a freight truck.
Common Door Installation Problems We See in Foster City Homes
- Racked door openings from Bay fill settlement. Foster City is built on compacted dredge fill, and it’s still settling. Door frames that were square in 1975 are now off by a quarter to three-eighths of an inch, which means doors bind at the top corner and gap at the bottom. We re-square the opening before setting any new door.
- Corroded aluminum frames from multi-directional salt air. The lagoons wrap the city on three sides, so there’s no sheltered direction. Aluminum frames pit and corrode, sashes misalign, and seals fail years earlier than they would inland. We often replace the entire frame rather than trying to patch a corroded jamb.
- Failed waterproofing at door thresholds. On lagoon-side homes, water driven by wind finds its way under door thresholds that weren’t flashed to modern standards. The rot starts inside the wall cavity and you don’t see it until the door is removed. We inspect for this on every install and fix it before hanging the new door.
- Fogged patio door glass. Single-pane patio sliders from the original build are nearly all failed at this point. Fog between the panes means the sealed unit is dead, and that means heat loss, condensation, and a door that never looks clean. Replacement with low-E insulated glass is the standard fix we recommend in Foster City.
Pricing for Door Installation in Foster City, CA
Entry door installation in Foster City typically runs $1,800 to $4,200, depending on door material, glass package, and whether the rough opening needs re-squaring work. Patio slider replacement runs $2,200 to $5,500, with wider multi-panel units at the top of that range. Storm doors run $600 to $1,300 installed. The variables that move your number: structural work to a racked or rotted opening, glass upgrades, and hardware. We give you a written line-item quote before we start, and if we find something unexpected inside the wall, you approve the added cost in writing before we touch it. Call (888) 635-0804 for a free estimate. We’ll measure twice and show you manufacturer lines side by side on paper.
We Also Serve Cities Near Foster City
Our crew serves Door Installation in Foster City and the surrounding communities along the Peninsula and nearby areas. That includes Parkway, Arden-Arcade, Ladera Heights, and Commerce. If you’re just outside Foster City and need a door installed or repaired, call (888) 635-0804 and we’ll confirm coverage for your street.
Serving Foster City, CA - Our Local Coverage Area
We’re based in the Foster City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Foster City
Because the entire city sits on compacted Bay fill that is still settling. Over decades, that subtle movement pulls door openings out of square by a quarter inch or more, which makes doors bind at one corner and gap at the opposite corner. Neighboring cities like San Mateo and Redwood City sit on more stable ground and don’t see this at the same rate. The fix is re-squaring the rough opening before setting the new door.
Call (888) 635-0804 for a free estimate on your binding door. We’ll check the opening and tell you exactly what it needs.
The most common code triggers we see are smoke and CO detector upgrades, tempered glass requirements for doors adjacent to glazing, and anchoring upgrades for shear wall compliance. When we open a wall and find outdated wiring or framing that isn’t to current code, the permit requires us to correct it. We write allowances into the quote for these and price any surprise in writing before we start.
Call (888) 635-0804 and we’ll walk you through what a permit will trigger on your specific home.
Salt air corrodes door hardware and breaks down weatherstripping much faster than inland conditions. Hinges, strike plates, and threshold screws pit and bind, and rubber or foam weatherstripping loses its compression. We install marine-grade stainless hardware and closed-cell foam weatherstripping on Foster City jobs to get the longest possible service life.
Call (888) 635-0804 to schedule a hardware and weatherstripping inspection.
It means the sealed insulated glass unit has failed. Moisture has been pulled between the panes, and the argon or air fill is gone. That means condensation, reduced insulation, and a door you can’t see through clearly. The fix is replacing the insulated glass unit, or the entire sliding panel if the frame is corroded. We do this regularly on Foster City patio doors.
Call (888) 635-0804 and we’ll measure the glass and quote you a replacement.
Yes. We install ENERGY STAR certified entry doors and patio sliders with low-E glass and insulated cores that reduce the temperature differential that causes indoor condensation. On Foster City homes with single-pane originals, the difference is dramatic, both in comfort and in reduced fogging. We’ll show you the energy ratings on paper before you choose.
Call (888) 635-0804 for a free estimate and the full line item detail on energy-rated doors.
Contact TruePane Windows & Doors in Foster City
We’ve spent years opening walls in Foster City homes, and we know what we’re going to find before the drywall comes off: racked frames, corroded aluminum, hidden rot at thresholds, and code items the original builders never had to deal with. We handle it all with written pricing and a warranty that’s registered before we leave your driveway. Call (888) 635-0804 to schedule your free estimate. We’ll measure twice, show you your options side by side, and give you a written quote with no surprises later.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Foster City and the Peninsula.