Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Plano
Door installation in Plano typically costs $550-$2,600 installed, depending on the door style, frame condition, and whether the rough opening needs reframing. Most single entry door replacements on 1970s-1980s east Plano homes run $900-$1,800, and we’re usually 3-5 business days out for standard installs. If you live in Plano and your door binds, sticks, or won’t latch after a dry summer, call us at (888) 635-0804 - the problem is often the clay soil under your slab, not the door itself. TruePane Windows & Doors has been doing Door Installation in Plano long enough to know what’s behind the drywall before we touch it.
Why TruePane Windows & Doors Is Plano’s Preferred Door Installation Company
Plano homeowners call us because we answer the phone with a person, not a menu, and because our technicians show up in uniform, on time, and ready to measure every opening twice. Dale Kessler founded this company in 2008 on a rule that still hangs in the shop: if the pane is not true, the job is not done. That rule applies to doors, too. A door that’s hung in an out-of-square frame will bind again, no matter how nice the slab is. So we check the frame first, every time.
Our Plano customers tend to have lived in their homes twenty, thirty, sometimes forty years. They remember the contractor who left them with a fogged seal and a door that sticks every July. They’re not looking for the cheapest bid. They’re looking for someone who will still be in town and still answer the phone if anything goes wrong. We plan to be in town in thirty years, and we back every install with our Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing.
Our Door Installation Services in Plano
Every door we install in Plano starts with an inspection of the frame, the rough opening, and the foundation movement under the slab. Skip that step and you’re buying a door that will fail the same way the old one did. Here’s what we install most often across Plano’s neighborhoods, from east side brick ranches to west side two-story builds.
Entry & Swing Doors
Entry door replacement is the most common job we do in Plano, especially in the 1970s and 1980s neighborhoods east of Central Expressway. Homeowners in 75074, 75075, and 75023 are sitting on original aluminum and hollow-core steel doors that are past end of life. We quote entry doors side by side on paper, from steel to fiberglass to solid wood, so you see exactly what you’re paying for before any work begins. A new entry door on a Plano home, properly flashed and hung square, should operate without binding for decades.
Storm Doors
Plano gets real weather - hail, high wind, and summer heat that pushes past 100°F. A well-fitted storm door adds a layer of protection to your primary entry door and gives you cross-ventilation in spring and fall. We install storm doors with full-perimeter weatherstripping and adjust them to the existing entry frame, because an old east Plano frame is rarely perfectly square.
Double & French Doors
French doors and double entry doors look great on Plano homes, but they’re twice as sensitive to foundation movement. Two door slabs on a shared frame means any rack in the opening gets amplified across the whole unit. We level and square the rough opening before installation, and we use fusion-welded frames with reinforced corner blocks on double doors so the hinge side stays true. In Plano’s expansive clay, that’s not a luxury - it’s the difference between a door that swings properly and one that drags on the sill within a year.
Pivot Doors
Pivot doors have become a signature feature on some of the newer builds in west Plano’s 75093 and 75024 ZIP codes. These are heavy doors - often solid wood or glass-panel - and they depend on a plumb, stable rough opening. We install pivot systems from manufacturers we trust, including PGT and CGI, and we register both warranty layers in writing before the truck leaves your driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plano
We install and service doors from more than a dozen manufacturer lines, and Plano customers most often ask about Ply Gem, PGT, and CGI. We stock common parts and hardware locally for these brands, which means faster turnaround when a hinge, threshold, or weatherstrip needs replacement. Because we’re an authorized installer, your manufacturer warranty stays intact - and we register both warranty layers in writing, with durations stated, before we leave the job.
Common Door Installation Problems We See in Plano Homes
- Doors that bind after a dry summer. Plano sits on Vertisol black clay that shrinks in drought and swells when moisture returns. That movement racks slab foundations and pulls door frames out of square - so a door that was fine in spring suddenly won’t latch in August. This is a soil problem, not a hinge problem, and it has to be checked before any door is quoted.
- Rotted or undersized rough openings on 1970s-1980s east side homes. Original builder-grade frames were often set with minimal flashing and no sill pan. Forty years of wet Plano springs and summer humidity rots the sub-sill. If you hang a new door on that rotted wood, the jamb fails. We rebuild the opening first.
- Storm doors jammed over warped entry frames. We see a lot of east Plano homes where the storm door was mounted to an entry frame that was already out of square. The storm door binds at the latch, the closer tears loose, and the whole assembly gets worse every season. The fix is squaring the primary door, then resetting the storm door on a solid anchor.
- Skipped permits on reframing work. When a door replacement requires reframing, the city of Plano requires a permit. Skipping it triggers a stop-work order and forces unplanned code upgrades, like fire-rated jamb clearances. We pull permits when they’re required, and we make sure the work passes inspection the first time.
Pricing for Door Installation in Plano, TX
What you’ll pay for a door installation in Plano depends mostly on the condition of the existing frame. A standard entry door swap where the frame is square and solid runs $550-$1,100. A mid-range fiberglass or steel entry door with sidelights, on a home where we need to reframe and flash the opening, runs $1,500-$2,600. Double French door units generally start around $1,800 and go up from there, depending on material and glass. Storm doors run $350-$700 installed. Every quote is a written, line-item price, fixed before we start - no change orders, no surprises on the bill. Call (888) 635-0804 to schedule your free estimate. We’ll come out, check the frame, check for foundation movement, and give you a number you can hold us to.
We Also Serve Cities Near Plano
TruePane Windows & Doors serves Plano and the surrounding North Texas communities. If you’re in Garland, Carrollton, Richardson, or Rowlett, our local crews cover your area too, with the same inspection-first process and the same Done Right Promise.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Plano
The most common cause is Plano’s Vertisol black clay shrinking during drought and shifting your slab foundation enough to pull the door frame out of square. A door that bound last August and freed up after fall rain is telling you something about the soil under your home - we check for exactly that before quoting any replacement. Call (888) 635-0804 and we’ll tell you whether the fix is a hinge adjustment or a squared frame.
If we’re only swapping the door slab and the existing jamb stays put, no permit is required. If the rough opening needs reframing or the structural header above the door changes, the city of Plano requires a permit, and we pull it. We handle everything - permit application, inspection scheduling, and final sign-off.
Only if the primary entry frame is square and solid. On a lot of east Plano homes, the original frame is racked from decades of clay-soil movement, and the storm door is mounted over a warped opening. Keeping it hides the real problem and makes both doors fail faster - we’ll tell you honestly whether the frame can support a storm door or needs to be rebuilt first. Call (888) 635-0804 for a free inspection.
Because the previous quote never looked behind the trim. A door slab swap is quick to quote and cheap to sell. A proper Plano door installation means pulling the interior casing, checking the rough opening for rot and out-of-square rack, and rebuilding it if needed. That’s why our quotes sometimes land higher than the sign-and-drive guys - and why our doors still close properly ten years later.
If the fog is inside glass panels on an aluminum or steel door, the insulated unit has failed. Replacing the door with a new unit that has properly sealed, low-E glass will eliminate the fog - and if the old door leaked at the threshold or jamb, reframing and reflashing fixes the moisture source. That’s the difference between treating a symptom and replacing a failed assembly. Call (888) 635-0804 for a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plano since 2008.