Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Redwood Shores
Door installation in Redwood Shores, CA means working with HOAs, salt air, and 30-year-old aluminum frames that have had enough. Most replacement doors in this community run between $1,800 and $6,500 installed, depending on style, materials, and whether the jamb needs rebuilding. If you’re on a lagoon-fronting street, budget for marine-grade hardware, not builder-basic aluminum. Call TruePane Windows & Doors at (888) 635-0804 and we’ll walk you through the review process, the materials, and the install, in plain English.
Why TruePane Windows & Doors Is Redwood Shores’s Preferred Door Installation Company
We have worked enough Redwood Shores homes to know the difference between a door that fails in three years and one that holds up for thirty. Dale Kessler founded TruePane in 2008 after spending years watching out-of-true installs and voided warranties get written off as normal. That is not our standard. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. No paperwork fights. No arguing.
Our technicians are background-checked and uniformed, and they measure every opening twice. When we quote a door for a Redwood Shores home, we quote manufacturer lines side by side on paper so you see exactly what you are buying. If the pane is not true, the job is not done. That rule governs every install we run. A live person answers our phone 24 hours a day, 7 days a week, not a voicemail tree. Call (888) 635-0804 and you’ll get a person who knows doors.
Our Door Installation Services in Redwood Shores
Entry & Swing Doors
A front door on a Redwood Shores stucco home does more than swing. It holds the architectural line, keeps the salt air out, and needs to operate without binding when the bay breeze pushes against it. We install fiberglass, steel, and wood entry doors sized to the original opening, with threshold and weatherstripping details that handle the marine layer. Most entry door replacements in Redwood Shores run $2,200 to $5,800. HOA submittal comes first, always.
Double & French Doors
French doors off a dining room or patio let in the lagoon view and, if the original builder jamb was reused, let in water and bound hinges within a few seasons. We replace the jamb when we install a double or French door, unless the existing jamb measures true and shows no rot. In Redwood Shores, plan for $3,500 to $8,000 for a properly flashed, square-set double door with low-E glass. You will notice the difference in July when the door still opens without a shoulder.
Bifold & Folding Doors
Bifold and multi-panel folding doors are popular on lagoon-fronting homes where homeowners want the whole wall to open. These assemblies are heavy, and a track that was originally set for a lightweight slider will not carry a four-panel fold. We reinforce the header and set new track with marine-grade fasteners as standard practice in Redwood Shores. Expect $6,000 to $12,000, depending on panel count and glass package. This is a job where skipping the jamb work costs more later.
Pivot Doors
A pivot door is a statement piece, and Redwood Shores has the contemporary architecture to carry it. But a pivot door weighs more than a hinged slab, and the pivot hardware must be specified for the load. We quote pivot systems from manufacturers who publish their load ratings, and we set them on reinforced framing. Redwood Shores pivot door installs typically run $5,000 to $10,000. HOA review on a pivot door often takes one extra cycle because the board wants to see the full hardware spec, not just the slab.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redwood Shores
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. We quote Ply Gem and CWS where the budget calls for it. What matters in Redwood Shores is that we stock local parts for the common failures here: stainless rollers, marine-grade hinges, and replacement threshold caps that fit the original extrusions on 1980s and 1990s homes. That means faster turnaround when you need a door fixed, not just replaced. Our Door Installation team can walk you through the brand options on paper before you commit.
Common Door Installation Problems We See in Redwood Shores Homes
- Corroded sliding door tracks on lagoon-fronting streets. Direct salt spray pits aluminum tracks within a single winter season. Lagoon neighborhood homes built between 1983 and 1998 are now on their second or third set of rollers, and many need full track replacement rather than another glass swap.
- HOA submittal packets filed without frame color and finish samples. This stalls the project for one to two review cycles. We put together the complete packet, including manufacturer finish swatches, door elevation drawings, and hardware spec sheets, before you ever sign a contract.
- Fogged insulated glass units from seal failure. The marine layer in Redwood Shores runs high humidity against dual-pane seals, and 30 to 40 years of that is enough to fog most original units. When the sash is part of a patio door, the glass is only half the repair; the frame usually needs work too.
- Sagging original jambs under heavier replacement doors. Swapping a lightweight aluminum slider for a triple-pane or wood-clad door without rebuilding the jamb causes immediate hinge bind and weatherstripping failure. We check the jamb before we quote the door.
Pricing for Door Installation in Redwood Shores, CA
A standard single entry door replacement in Redwood Shores runs $2,200 to $5,800 installed. A patio or French door starts around $3,500 and goes up from there based on glass package, frame material, and whether the jamb needs rebuilding. Lagoon-fronting homes should add $400 to $900 for marine-grade hardware: anodized or stainless tracks, stainless hinges, and corrosion-resistant locksets. Storm doors on Redwood Shores homes typically run $900 to $2,200. Sliding glass door replacements with a fusion-welded frame and low-E glass run $4,000 to $9,500. Every quote we give is line-item and fixed: the price on the paper is the price on the bill. Call (888) 635-0804 for a free estimate.
| Door Type | Typical Range in Redwood Shores | Notes |
|---|---|---|
| Entry/Swing Door | $2,200 - $5,800 | Fiberglass, steel, or wood; jamb work may add cost |
| Double/French Door | $3,500 - $8,000 | Low-E glass; jamb replacement recommended |
| Bifold/Folding Door | $6,000 - $12,000 | Header reinforcement required for weight |
| Pivot Door | $5,000 - $10,000 | Load-rated hardware; HOA review often longer |
| Sliding Glass Door | $4,000 - $9,500 | Marine-grade track and stainless rollers standard on lagoon side |
| Storm Door | $900 - $2,200 | Marine-grade hardware recommended for lagoon exposure |
We Also Serve Cities Near Redwood Shores
TruePane runs crews throughout the Peninsula, and we regularly install doors in Parkway, Arden-Arcade, Ladera Heights, and Commerce. If you’re in one of those communities and dealing with the same salt-corroded aluminum problem, call the same number. For more about our work across the broader area, see Door Installation in Redwood Shores and the surrounding communities we cover.
Serving Redwood Shores, CA - Our Local Coverage Area
We’re based in the Redwood Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Redwood Shores
Yes. Most Redwood Shores HOAs require architectural review for any exterior door replacement, even a like-for-like swap. The submittal packet typically needs door elevation drawings, manufacturer finish and color samples, hardware spec sheets, and sometimes a photo of the existing door in context. We prepare the packet for you and file it before any materials are ordered. Call (888) 635-0804 and we will tell you exactly what your association needs.
Because the salt air corrodes aluminum tracks to the point of pitting and bowing, and new glass does not fix a derailed panel. On Lagoon neighborhood homes, especially those built in the mid-1980s, the original extruded tracks have been hit with direct bay spray for decades. We pull the old track, check the jamb, and set a new marine-grade track with stainless rollers so the door runs true. Glass-only replacement just buys a season or two.
One to two review cycles, which in most Redwood Shores HOAs means two to six weeks, depending on how often the architectural board meets. We schedule around it: we file the packet, order materials with a lead time that overlaps the review window, and have the door on the truck when the approval lands. No boarded opening sitting exposed to fog and salt air for weeks.
Most Redwood Shores HOAs allow fiberglass and wood-clad doors if the finish and style match the community’s architectural guidelines, but each association’s standards differ. Some permit aluminum only. We pull your HOA’s specific guideline before we recommend a material, so you do not buy a door the board will not approve. A quick call to (888) 635-0804 gets that started.
Anodized or stainless steel hinges, a stainless or powder-coated aluminum closer, and a lockset rated for exterior coastal exposure. Standard zinc hardware on a lagoon-side storm door will pit and bind within one winter. We specify the hardware before we quote the door, and it is already in the line-item price. No surprise add-on.
The Redwood Shores HOA Reality Most Installers Do Not Mention
Redwood Shores is a master-planned community built almost entirely in the 1980s and 1990s directly on reclaimed bay-edge land. Every home on lagoon-lined streets sits close enough to San Francisco Bay for salt air to get at the door hardware. The original aluminum-frame sliders and dual-pane windows have been corroding for 30 to 40 years, and entire blocks are now in a replacement wave. But before any door gets set, the HOA architectural standards govern frame colors, finishes, and styles. We know the process because we file these packets regularly: door elevation drawings, finish swatches, hardware spec, and the specific approval form each association wants. We schedule around the review so the work does not sit half-finished waiting on a committee. That is how a Redwood Shores door installation should go, and that is how we run ours.
On a Lagoon neighborhood home where the original 1984 Milgard aluminum slider had derailed twice in one year, our crew pulled the corroded jamb and found the track bowing from salt pitting, with both panels’ insulated glass units fogged from seal failure. We installed a fusion-welded Andersen gliding door with a low-E/argon fill package, new stainless rollers, and a full flashing tape detail before the HOA review board had even seen the final frame color swatch. That is the difference between a real door company and a crew that swaps glass and leaves the frame to rot.
If you live in Redwood Shores and your door binds in July, fogs in December, or derails every time the bay wind picks up, call TruePane at (888) 635-0804. We will measure, quote, file the HOA packet, and install a door that holds its line. Free estimates. Fixed pricing. The Keystone Standard on every job.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Redwood Shores and the wider Peninsula.