Door Installation in Round Rock - Free In-Home Measure, Written Price

Fast, Reliable Door Installation Across Round Rock

Door installation in Round Rock almost always involves more than hanging a new slab in an old frame. The clay soil under Williamson County moves, and it moves a lot. That movement torques door frames out of square over years, which means a door that closed fine a decade ago now drags, binds, or won’t latch at all. If you live in a 1990s or early 2000s brick-veneer tract home in 78665 or 78681, you already know what we’re talking about. TruePane Windows & Doors has been replacing doors in Round Rock for years, and we start every job by checking whether the frame is still square before we quote a single number. Call (888) 635-0804 for a free estimate, and we’ll come out and inspect what’s actually behind your door. At TruePane, Door Installation means setting the opening right first, then hanging the door so it stays right.

Call (888) 635-0804

Why TruePane Windows & Doors Is Round Rock’s Preferred Door Installation Company

Round Rock homeowners have called us after other contractors hung a new door in an out-of-square frame and left it to bind by August. That never works here. The shrink-swell clay underneath neighborhoods like Brushy Creek, Teravista, and Sonoma routinely shifts slab foundations, and a door that is marginally square in January can be visibly racked by July. Our technicians measure every opening twice, check for frame rack with a level and a square, and re-square the frame before a single screw goes in. That is the only way a door replacement lasts in this soil. It’s also why we quote with written line items: you see the frame correction, the flashing, the door unit, and the hardware as separate costs, not a vague lump sum.

Dale Kessler founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. That rule applies to every door frame, door slab, hinge, and latch we install. Our crews serving Round Rock are background-checked, uniformed, and trained as craftsmen, not day labor. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and every job carries the Done Right Promise. If something isn’t done right, we make it right. No paperwork fights, no fine print that covers neither. And a live person answers the phone 24 hours a day, 7 days a week. Not a voicemail tree, not a callback form. Call (888) 635-0804 and a person picks up.

We have a strong local reputation across Round Rock. Homeowners in Paloma Lake, Mayfield Ranch, and Forest Creek have kept our schedule full for years because we show up when we say, we quote honestly, and we finish most single-door replacements in one visit. We purchase local supplies, we know the city’s permit requirements for exterior door replacement, and we plan for the framing surprises that Round Rock homes reliably deliver. Scheduling is coordinated through our Austin office, but the crews that show up are Round Rock crews who drive these streets every week.

Our Door Installation Services in Round Rock

Entry & Swing Doors

An entry door in Round Rock takes abuse all year: triple-digit heat on the west-facing side, February cold snaps that shrink weatherstripping, and constant dust from dry summers. Most Dell-era tract homes in 78665 and 78681 came with builder-grade vinyl or lightweight steel entry doors that have fusion-welded frames. After repeated slab movement, those frames crack at the corners. You’ll see gaps along the top corner of the door in August, or notice daylight at the latch side in January. We replace those doors with properly hung systems from Jeld-Wen, PGT, or Andersen, and we re-square the rough opening first, which is the step that separates a door that lasts fifteen years from one that starts sticking by next summer.

Double & French Doors

Double French doors are the most soil-sensitive door type we install in Round Rock. Two active panels mean two sets of hinges, two latch points, and an astragal that must line up perfectly. When a slab heaves under a patio or dining room opening, those doors fall out of alignment in ways a single door never will. We’ve rehung French doors that were binding so badly the homeowners had stopped using their back patio entirely. On every double-door installation, we shim and anchor the frame to withstand movement, and we check the reveal between panels after the floor settles through a full seasonal cycle. If your patio doors in 78664 or 78681 drag or the center seal gaps open, we can tell you whether it’s the frame, the hinges, or the doors themselves.

Bifold & Folding Doors

Bifold and multi-panel folding doors are common in Round Rock homes that were upgraded with expanded patios or sunrooms, especially in newer sections of Teravista and Paloma Lake. These systems carry a lot of weight across a wide opening, and when the floor moves, the track binds and the panels drift. A folding door that won’t close cleanly is rarely a defect. It’s usually a floor that moved. We install bifold systems on reinforced headers, level the track to the actual floor, not the original floor plan, and anchor the frame so seasonal movement doesn’t pull the track out of line. We carry parts for most major folding door lines and can often repair a track issue the same day.

Pivot Doors

Pivot doors are a statement entry, and Round Rock has a growing number of them in custom builds west of I-35 and around the Forest Creek area. A pivot door hangs its entire weight on a top and bottom pivot, not on edge hinges, so the floor and header must be dead level, or the door will sag and scrape. In Williamson County, dead level is a temporary condition. We install pivot doors with adjustable pivot systems and oversized rough-ins that allow for future slab movement without rebinding. If you’re replacing a creaking, dragging pivot door that another company installed without accounting for the clay soil, we can usually reset the pivots and rebalance the door without replacing the entire unit.

Storm Doors

A storm door in Round Rock does double duty: it knocks down the August heat gain on east-facing entries and protects a primary entry door from full sun and weather. But a storm door on an out-of-square frame is a rattling, sagging nuisance. We install storm doors from Ply Gem and CWS on frames we square and flash correctly, and we use adjustable sweeps and expanders that keep the seal tight through dry summers and stormy springs. In 78664, where older wood-frame homes have settled unevenly for decades, we regularly find that a storm door was installed over a frame that was already out of level by half an inch or more. We fix the frame, then install the storm door.

Common Door Installation Problems We See in Round Rock Homes

• Builder-grade vinyl frames cracked at the corners. The 1990s Dell-era tracts across 78665 and 78681 were built fast with fusion-welded vinyl door frames. After decades of slab movement from Williamson County’s clay, those welds crack. The door still looks fine, but the gap at the corner lets August heat in and February drafts through. Replacing the door without replacing or re-squaring the cracked frame is wasted money.
• Rotted jambs in Old Town’s pre-1960 homes. In the older wood-frame houses near Mays Street and Sheppard Street in 78664, original door jambs often rot from years of humid air leaking around failed single-pane glazing. The jamb fasteners lose their grip, the door drops, and it drags on the threshold. You can sand the bottom of the door, but the real problem is the rotted wood behind it.
• Fogged dual-pane glass in original doors. By 2023 to 2025, the dual-pane glass in many original Round Rock doors has reached end of serviceable life. The seal breaks, the argon fill leaks out, and the unit fogs permanently. Homeowners often think the entire door is bad when it’s just the IGU. We can often replace the glass unit and reseal the door for a fraction of a full replacement cost.
• Out-of-square frames from slab movement. This is the signature Round Rock door problem. The clay soil under the home loses volume in dry summers and re-expands after rain, which heaves and settles the slab repeatedly. A door that suddenly won’t latch in August is almost always a soil-movement issue, not an installation defect, and any door replacement quote needs to account for re-squaring the frame first.

Pricing for Door Installation in Round Rock, TX

Trusted Brands We Service in Round Rock

We are an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Round Rock homes, we regularly recommend Jeld-Wen steel entry systems for security and thermal performance, PGT impact-rated doors for homes that want storm protection without shutters, and Ply Gem or CWS storm doors for energy efficiency and ventilation. We stock local parts for all of these lines, and because we have an Austin warehouse, Round Rock customers see faster turnaround on special-order door sizes and glass packages than companies running jobs from out of county. When we quote a door, we quote manufacturer lines side by side on paper, so you see exactly what each option costs and what each warranty covers. We register both warranty layers in writing before the truck leaves your driveway. That’s the Keystone Standard.

We Also Serve Cities Near Round Rock

In addition to Door Installation in Round Rock, our crews handle door installations and replacements for homeowners in Pflugerville, Hutto, Cedar Park, and the State Board of Insurance area. Whether you’re in a Dell-era tract home, a custom build west of I-35, or an older wood-frame house near downtown, the same square-frame standard applies.

FAQs - Door Installation in Round Rock

What a Round Rock Door Replacement Actually Triggers Inside the Walls

Every door replacement quote in Round Rock should start with what’s behind the door. The clay soil under Williamson County moves slabs so aggressively that door frames are chronically torqued out of square, and a door that doesn’t latch in August is almost always a frame problem, not a hinge problem, not a latch problem. So our inspection looks at three things before we price anything: whether the rough opening is square, whether the jamb wood is still solid, and whether the flashing and weatherproofing around the opening has survived decades of Texas sun and rain. In a Dell-era tract home in 78665 or 78681, we expect to find cracked vinyl frame corners and gaps at the top of the door in summer. In Old Town’s pre-1960 wood-frame houses around Mays Street and Sheppard Street, we expect rotted jambs from years of humid air leaking around failed single-pane glass. We write that work into the estimate as a line item, and we explain it in plain terms before any saw comes out. Re-squaring a frame is not an add-on surprise. It’s the standard first step of a door replacement in Round Rock. If a contractor gives you a number without inspecting the frame, that number is not real.

Neighboring Travis County cities like Austin experience far less of this because their soils are thinner and less expansive. But Round Rock sits on deep clay that shrinks and swells on a schedule you can feel in your front door. That’s why our crews know to sister a header, re-flash a sill with butyl tape, and anchor a frame so it survives the next ten dry summers and wet springs. It’s also why we don’t hang doors in a hurry. We measure twice, we check the frame with a level and a square, and we walk away only when the door swings true and latches clean. Call (888) 635-0804 and we’ll give you a written estimate that accounts for the whole job, not just the door.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Round Rock with door installation and replacement craftsmanship since 2008.