Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across San Pedro
Door installation in San Pedro runs $450-$2,900 for a standard single entry door and $2,200-$9,800 for a full custom or multi-panel project, and most jobs are completed in one visit. That range reflects what we actually see on the ground in the 90731 ZIP: 1920s craftsman bungalows with non-standard rough openings, tight bluff-side lots with no staging room, and hardware that fought salt air for decades before you called us. If you’re on a street anywhere from Point Fermin to Harbor View, we know your door isn’t a one-size-fits-all problem, and we quote it that way. Call (888) 635-0804 for a free, line-item estimate that accounts for the actual conditions at your house, not a national average.
Why TruePane Windows & Doors Is San Pedro’s Preferred Door Installation Company
We’ve worked enough San Pedro homes to know what the harbor does to a door. Houses on bluff-side streets take a steady diet of salt-laden marine air and port-generated diesel particulate, and the difference between a door that lasts twelve years and one that binds and sags in three comes down to the hardware and seals specified before the job starts. That’s why our Door Installation team quotes 316 marine-grade stainless hinges and compression gaskets as a baseline on any 90731 project, not an upsell. We learned this the hard way, and we’d rather lose a job to a cheaper quote than install hardware we know will corrode on you.
Our technicians are background-checked, uniformed, and trained to work within San Pedro’s density constraints: shared driveways, zero-lot-line walls, and the noise ordinances that govern work hours in residential areas. We keep job sites swept, materials staged in a narrow footprint on one side of the driveway, and the neighbors informed before we start drilling. When we say we’ll be there, we’re there. We serve San Pedro with the same standard Dale Kessler set when he founded the company: if the jamb is not true, the job is not done.
Our Door Installation Services in San Pedro
Entry & Swing Doors
A new entry door on a San Pedro bungalow typically runs $650-$3,400 installed, and the number moves based on three things: the rough opening, the jamb condition, and the hardware spec. In the 90731 ZIP, the hardware spec matters more than almost anywhere else in the South Bay. We regularly pull corroded steel hinges off doors less than five years old near the bluff, and we won’t repeat that mistake on your house. Entry doors get 316 stainless hardware, marine-rated weatherstripping, and a sill pan flashed to keep westerly wind-driven water out of the subfloor.

Storm Doors
Storm doors are one of the smartest buys on a San Pedro house, and most run $380-$1,200 installed. They take the first hit of salt spray and channel wind, which means the storm door is the part that corrodes while your primary door stays dry. We recommend aluminum-frame storm doors with powder-coated finishes and sealed bearings on the closer. The closer is the first thing to fail out here, and we fit models with a marine-grade finish that won’t seize up after two winters of harbor moisture.

Arched & Custom Doors
Custom arched and radius doors in San Pedro start around $2,700 and run upward from there, depending on the species, the glazing package, and the hardware. Working with a custom door on a 1920s craftsman or a bluff-side Mediterranean means matching the existing jamb profile and millwork, and that requires someone who measures the opening twice and orders the door with the reveal already accounted for. We spec every custom door with compression gaskets rated for continuous salt exposure, because a beautiful custom door with a failing seal is a five-figure mistake you’ll see every day.

Pivot Doors
Pivot doors are a heavier, more modern install we’re doing more often in San Pedro’s newer bluff-side builds, and they start around $3,400. A pivot door carries its full weight on a floor mount and top pivot, not barrel hinges, which means the framing has to be dead plumb and the subfloor has to handle the point load. We see pivot hardware begin to oxidize within two years if it’s not marine-grade, so we quote those components as standard on any door that faces the channel. The door is only as good as the pivot it turns on, and we don’t skip that detail.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Pedro
We install and service doors from PGT, CGI, and Ply Gem, among others, and we keep common parts and hardware stocked for San Pedro homes so we’re not calling around for a hinge set when you’re waiting on a callback. As an authorized installer for multiple manufacturer lines, we register both warranty layers in writing before the truck leaves your driveway - that’s The Keystone Standard, and it’s not negotiable. PGT and CGI both make impact-rated and marine-rated products that hold up better on bluff-side exposures than standard residential lines, and we quote them side by side on paper so you see the difference before you spend a dollar.
Common Door Installation Problems We See in San Pedro Homes
- Corroded hinges and thresholds on bluff-side exposures. Standard steel hardware on a door facing the channel will corrode within two to three years, and you’ll feel it first as a door that binds at the top hinge or a threshold that no longer sits flush. We replace those with 316 stainless and compression gaskets before reinstalling anything.
- Water intrusion under wood thresholds on tight-lot entrances. Persistent westerly winds off the main shipping channel drive rain horizontally, and on a tight lot with a short porch overhang, that water finds the threshold gap. We see subfloor rot in entryways that look dry from the top, and we always check the sill before quoting a replacement.
- Swollen and warped jambs in pre-1950 bungalows. The dense marine layer that settles over San Pedro keeps wood door jambs damp for much of the year, and original single-pane doors from the 1920s and 1930s have usually absorbed decades of that moisture. A door that won’t latch in July but swings freely in January is almost always a swollen jamb, not a broken lock.
- Non-standard rough openings that eat standard door orders. Craftsman-era homes and post-WWII tract houses in San Pedro were framed before modern door slabs existed, and the rough openings rarely match a box-store pre-hung unit. We measure every opening twice and order the door to fit the hole, not the other way around.
Our crew replaced a corroded 1940s wood entry door on a bluff-side bungalow near Point Fermin, where the original jamb had rotted from decades of channel-driven moisture. We routed new treated lumber for the jamb, installed a marine-grade fiberglass door with a fusion-welded frame and low-E insulated glass unit, and finished with flashing tape at the sill to keep westerly wind-driven water out of the threshold. That’s the full scope of what a door replacement on this part of the coast actually involves, and we quote it so you understand every line item before we start.
Pricing for Door Installation in San Pedro, CA
| Door Type | Typical San Pedro Range |
|---|---|
| Entry door replacement (standard slab) | $650 - $2,900 |
| Storm door (aluminum frame, marine-grade closer) | $380 - $1,200 |
| Double/French door (exterior, pre-hung) | $1,800 - $4,400 |
| Custom arched or radius door | $2,700 - $9,800 |
| Pivot door install | $3,400 - $6,900 |
Those are the numbers we quote for San Pedro jobs. The biggest cost drivers are jamb replacement on older frames, marine-grade hardware upgrades, and site access on tight bluff streets where we have to stage materials in a constrained footprint. We never quote a door without looking at the threshold and the rough opening, and we never add a surprise line item after the work starts. Call (888) 635-0804 and we’ll come measure it right. The estimate is free, and it’s written so you can compare it line by line against any other contractor in town.
We Also Serve Cities Near San Pedro
If you’re outside the 90731 ZIP but close by, we serve Lakewood, Lomita, Rancho Palos Verdes, and Carson with the same hardware standards and the same Done Right Promise. Dispatch and scheduling are coordinated from our Los Angeles office, and crews serve San Pedro and the surrounding South Bay communities locally. You get a live person on the phone every time you call, and a crew that knows the difference between a Lomita tract home and a Rancho Palos Verdes bluff exposure.
Serving San Pedro, CA - Our Local Coverage Area
We’re based in the San Pedro area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in San Pedro
San Pedro sits directly above the Port of Los Angeles on harbor-facing bluffs, and the air here carries a salt-and-diesel particulate mix that corrodes standard steel hinges and thresholds within two to three years, not the ten or fifteen you’d expect a few miles inland. Lomita and Torrance don’t get that same channel-driven salt exposure. We spec 316 marine-grade stainless hinges, compression gaskets, and corrosion-resistant thresholds as a baseline on any 90731 project, because using standard hardware out here is a callback we don’t want to make. Call (888) 635-0804 and we’ll quote the right spec for your exposure.
Most San Pedro streets from Point Fermin to North Gaffey curve through hillside and bluff lots where driveways are narrow, shared, or not able to hold a work van, so we stage materials in a compact footprint, keep saws and scrap contained on one side, and schedule material drops around the parking restrictions on your street. Access affects the quote, because a door that has to walk 200 feet up a bluff staircase costs more to deliver and install than one that comes through a two-car garage. We explain that in the estimate before we start, and we keep the site clean enough that your neighbors won’t have a reason to complain.
For a like-for-like door replacement that doesn’t alter the rough opening or the exterior dimensions, most San Pedro residential jobs don’t need a permit, but if your home is in a designated historic overlay or the door is on a facade with design-review requirements, you may need approval before we start. We check that with the city on your behalf for any job that looks like it falls under review. If a permit is required, we pull it, schedule the inspection, and don’t leave the job until it’s passed. Call (888) 635-0804 and we’ll tell you what applies to your specific street and structure.
San Pedro enforces the same Los Angeles County noise ordinance that limits construction noise to between 7:00 a.m. and 9:00 p.m. on weekdays and later start times on weekends, with residential areas like the bluff neighborhoods sometimes having stricter local rules. We schedule power-tool work within those hours and handle quiet tasks, like thresholds and weatherstripping, outside of them. If your street association or building has additional restrictions, we respect them and note them on the schedule before we start. Call (888) 635-0804 to find a window that works for your block.
On bluff-side streets with direct channel exposure, we generally recommend fiberglass because it won’t swell, rot, or warp the way a wood jamb and slab will after years of salt-laden moisture, and it holds a finish longer without paint peeling at the base. Wood doors can work on San Pedro homes, especially if you’re matching a craftsman style and you commit to keeping up with the marine-coat refinishing, but on the windward side of the bluff they’re a continuous maintenance issue. For most homeowners in the 90731 ZIP, a fiberglass door with a wood-grain finish gets the look without the rot. Call (888) 635-0804 and we’ll walk you through both options with prices on paper.
If your door is corroded at the hinges, binding in the jamb, or letting in water at the threshold, don’t wait for the next big storm. Call (888) 635-0804 for a free, line-item estimate on door installation in San Pedro, and we’ll quote the job with marine-grade hardware as a baseline, not an upgrade. We stand behind the work with a Done Right Promise, and both manufacturer warranty layers are registered in writing before our truck leaves your driveway.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Pedro since 2008.



Before
After
Before
After
Before
After