Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Stafford
Door installation in Stafford, TX runs $450-$2,800 for most entry and storm doors, with double and French units typically landing between $1,200 and $4,500 depending on material and framing condition. TruePane Windows & Doors has been working in Stafford long enough to know that a door is never just a door here: it is a slab, a jamb, a sill plate, and often a rough opening that needs honest carpentry before anything new goes in. Call (888) 635-0804 for a free estimate. We answer the phone when you call, day or night.
Why TruePane Windows & Doors Is Stafford’s Preferred Door Installation Company
Our crews know the brick-veneer ranches off Murphy Road and the two-story builds along US-90A because we have opened up enough of their rough openings to know what waits behind the casing. Stafford is not Sugar Land. The ground here moves. That is not marketing language: decades of groundwater extraction have caused documented subsidence across the corridor, and it shows up in every door we pull. A customer in the 77477 or 77497 ZIP asks why their door binds in August. We know the answer before we walk in.
Homeowners in Stafford call us because a live person picks up the phone. Not a voicemail tree. Not a callback form. Dale Kessler founded TruePane in 2008 on a rule that still hangs in our shop: if the pane is not true, the job is not done. The door work follows the same standard. Our technicians are background-checked, uniformed, and trained as apprentices before they ever run a job as journeymen. We measure every opening twice. We quote manufacturer lines side by side on paper. And we register both warranty layers before the truck leaves your driveway. That is The Keystone Standard, and it is in writing on every Stafford job.
Beyond the install itself, we support the community we work in. TruePane sponsors county fairs and church roof funds across the Stafford area because we plan to still be here in thirty years. A company that plans to be around answers for its work. We stand behind ours. Whether you need a storm door on a 1970s original brick veneer or a new pivot door on a custom build, you will get a square deal: fixed pricing, written line-item quotes, and a Done Right Promise covering workmanship with no paperwork fights.
Our Door Installation Services in Stafford
Entry & Swing Doors
Entry doors in Stafford take more abuse than almost anywhere else in the metro. Heat indexes over 100°F and sustained humidity cause wood frames to swell and warp, while subsidence racks the rough opening out of square. A new entry door here needs a shim-and-plumb correction before it is ever set. We handle that as standard practice, not an upsell. We install fiberglass and steel entry doors from Jeld-Wen, Therma-Tru, and other lines we carry, and every one is set on a fusion-welded frame where the product allows it.

Double & French Doors
Double and French doors are popular in Stafford’s larger two-story homes in 77497, but they double the opportunity for air and water leaks when the opening is not square. We set both panels with paired reveals, adjust the astragal, and verify the active leaf latch before we call the job done. In Stafford, the ground movement means even a factory-true double unit needs custom shimming to close clean and stay sealed across both top and bottom sweeps.

Storm Doors
Storm doors make sense on Stafford’s 1970s and 1980s brick-veneer homes, where the original front door is still solid but the threshold is worn and the weatherstripping is tired. We install storm doors that work with the original brick veneer, not against it. Mounting surface is the difference: brick veneer needs standoff screws and careful flashing to avoid cracking the mortar joints. We have done enough of them off Murphy Road and the side streets of 77477 to know exactly where the brick will take a fastener and where it will not.

Bifold & Folding Doors
Bifold and folding doors show up in Stafford as patio transitions, laundry room enclosures, and interior room dividers in older ranch homes. The track alignment is the first thing to fail on a subsidence-racked floor, and the second thing to fail is the panel itself when the track binds. We install and tune bifold systems from standard interior units to full multi-panel exterior folding doors, with special attention to the floor line. In this city, the floor line is rarely what the original drawings said it was.

Pivot Doors
Pivot doors are the newest request we see in Stafford, usually on custom builds or major renovations. They look simple. The engineering is not: a pivot hinge carries the full weight of the door at two offset points instead of along the hinge stile, which matters on any door, but matters more in subsidence-prone soil where the framing shifts seasonally. We spec pivot hardware carefully and set the reveal tight enough to look clean and wide enough to survive the movement this ground delivers.
Other Dallas-area companies may install doors; Door Installation is the heart of what our crews do in Stafford. Our service covers every sub-service above and more, including Storm Doors, Arched & Custom Doors, and impact-rated units for flood- and storm-conscious homeowners.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Stafford
We are an authorized installer for more than a dozen manufacturer lines, and in Stafford we regularly work with, Therma-Tru, PGT, and CGI. When a Stafford homeowner calls about a door that has failed, we can usually pull manufacturer specifications the same day because we keep current catalog data and common replacement parts in local inventory. Door Installation in Stafford may involve a dozen different makes across the city’s housing stock, but a square deal means quoting the manufacturer’s line side by side on paper so you see exactly what you are buying. No surprises when the bill comes.
Common Door Installation Problems We See in Stafford Homes
These are the conditions we open up and fix across Stafford more than any others:
- Subsidence-racked openings. Decades of groundwater extraction have caused documented land subsidence across the Stafford corridor. The symptom is a door that binds at the top latch side in July and won’t latch in December. The fix is not a new slab; it is a correct shim-and-plumb rebuild of the rough opening before the new door goes in.
- Harvey moisture behind the jamb. Contractors often replace only the door slab, leaving a water-damaged jamb or sill plate from Hurricane Harvey to rot behind the new casing. We inspect for this on every Stafford door install. If it is there, we show you the damage and price the repair in writing before we touch it.
- Rotted OSB sheathing and soft king studs. In flood-hit neighborhoods, remediation crews often dried out and re-drywalled without fully addressing moisture that had wicked into window and door rough openings. We have opened up a straightforward door swap and found soft sheathing, compromised sill plates, and framing that would fail within a few years if covered over with trim.
- Skipped shimming on a subsidence-racked opening. Some installers skip the shim-and-plumb step entirely, dropping in a new slab and closing the casing over an out-of-square frame. That new door starts binding within months. The latch stops lining up. The owner calls us. The fix costs more than if it had been corrected on the first visit, which is why we correct it every time before we leave.
Pricing for Door Installation in Stafford, TX
A basic entry door with standard hardware starts around $450-$900 in Stafford. A fiberglass entry door with a fusion-welded frame typically runs $1,200-$2,200. Storm doors land between $400 and $900 installed, depending on the frame and glass package. Double and French door sets run $1,200-$4,500 depending on the manufacturer line, glass options, and whether the rough opening needs structural correction first. Pivot doors are the top end: $2,500-$8,000 for larger custom units.
What moves the price in Stafford specifically is the subsidence correction and the moisture repair. A one-day slab swap that uncovers a soft king stud and rotted sill plate becomes a three-day structural call. We plan for that. We write allowances into the contract up front when we expect the opening may need work, and any needed change is priced and approved in writing before we touch a single nail. Free estimates for Stafford homeowners: call (888) 635-0804.
We Also Serve Cities Near Stafford
TruePane crews run door installation jobs across the southwest Houston metro. Stafford is our local service hub for this area, and we work regularly in Missouri City, Sugar Land, Alief, and Bellaire. The same Done Right Promise and written warranty registration apply on every job. Call (888) 635-0804 to schedule a free estimate in Stafford or any neighboring city.
Serving Stafford, TX - Our Local Coverage Area
We’re based in the Stafford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Stafford
Subsidence from decades of groundwater extraction has caused detectable land movement across the Stafford corridor, and it shows up first at doors and windows. The rough opening drifts, the door binds, the latch no longer lines up. We correct this by rebuilding the opening with proper shimming and plumb before the new door is set, so the install is not fighting the ground from day one. If your door is already binding, call (888) 635-0804 for a free estimate.
Another contractor may cover it over. We do not. Harvey dropped 30-plus inches on Stafford in 72 hours, and in many homes the water wicked into rough openings and never fully dried. Before we set any new door, we check the jamb, sill plate, sheathing, and king studs for softness or rot. If we find damage, we photograph it, price the repair line by line, and get your written approval before we touch it. A mid-install surprise is not our business model.
In most Stafford residential door replacements, a permit is required when the rough opening is altered, the structural framing is repaired, or the door type is changed in a way that affects egress. When we open a wall for structural repair, the city of Stafford may require code upgrades to bring the opening into current compliance. We pull permits, schedule inspections, and handle sign-off. The permit cost is included in your written estimate, so the final price is never a surprise. Call (888) 635-0804 to discuss your specific door project.
Stafford sits on the Gulf Coast, where heat indexes regularly top 100°F and humidity stays high for months. Wood absorbs that moisture and swells; then the air conditioning dries it and it contracts. That cycle runs year-round in this city, faster than places like Dallas or Austin. The result is a wood frame that warps, binds, and rots at the bottom corners. We recommend fiberglass or steel frames for most Stafford exterior doors because they do not absorb water the way wood does. For an exact recommendation, call us at (888) 635-0804.
Yes. Brick veneer from the 1970s and 1980s is common across 77477 and 77497, and you cannot just drive screws through it. We use standoff fasteners and proper flashing so the brick does not crack and the mortar joints stay intact. The mounting surface matters, and our crews know what Stafford brick will take and what it will not. Call (888) 635-0804 for a free storm door estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Stafford and the surrounding communities.



Before
After
Before
After
Before
After