Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Energy-Efficient Windows Across Fort Myers
Energy-efficient window replacement in Fort Myers typically costs $800 to $1,800 per window installed, with whole-home packages running $8,000 to $25,000 or more depending on opening count and wind-zone requirements. Most Fort Myers homes we see were built between 1970 and 1995, and their original aluminum-frame windows are now failing faster because of salt air and post-Ian code enforcement. If your windows fog, bind, or let conditioned air escape, call TruePane Windows & Doors at (888) 635-0804 for a free in-home measure and a written quote that includes every permit, wind-load calculation, and Florida Product Approval number your Lee County inspection will require.
We work throughout Fort Myers, from McGregor Boulevard to the neighborhoods off Colonial and Daniels Parkway. Our crews know the 33900 zip code, and we understand what the Caloosahatchee’s salt air does to window frames and seals. Scheduling and dispatch run through our South Florida office; the crews that install your windows are local, background-checked, uniformed, and trained on the exact wind-load standards Lee County enforces after Hurricane Ian.
Why TruePane Windows & Doors Is Fort Myers’s Preferred Energy-Efficient Windows Company
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That rule has carried us through years of community service across Florida, and it is the standard we bring to every Fort Myers job, from a single Low-E slider off Summerlin Road to a full impact-rated replacement package in a gated community near McGregor.
Fort Myers homeowners call us because we do not treat a window replacement as a transaction. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it matters more in Fort Myers than almost anywhere else in Florida. Post-Ian, Lee County inspectors now demand Miami-Dade NOA documentation and wind-load calculations on what used to be routine swaps. We file that paperwork correctly the first time because we have been doing it in HVHZ territory since the code was written.
Our Done Right Promise covers every job. If something is not done right, we make it right. No paperwork fights, no fine print that covers neither side. A live person answers our phone 24 hours a day, 7 days a week. When a Fort Myers homeowner calls with a question about a permit inspection or a warranty registration, they talk to a person who knows Lee County’s building department, not a call center reading from a screen.
Our Energy-Efficient Windows Services in Fort Myers
Our Energy-Efficient Windows team installs, replaces, and services the units Fort Myers homes need most. Here is what that means in practice for the houses we see along the Caloosahatchee and throughout Lee County.
Low-E & Argon Gas Glass
Low-E coatings reflect infrared heat while argon gas between the panes slows thermal transfer. In Fort Myers, where afternoon sun pounds west-facing walls from March through October, Low-E argon units cut solar heat gain enough that many homeowners notice a difference in their cooling bill within the first full summer. The catch is that Low-E only works as designed when the seal is intact and the frame is square. A failed seal on a ten-year-old unit negates the entire point, which is why we inspect the opening before we ever order glass.
ENERGY STAR Replacement Windows
ENERGY STAR certification for the Southern climate zone sets specific U-factor and Solar Heat Gain Coefficient (SHGC) thresholds. Fort Myers falls in the Southern zone, so the units we install carry ratings tuned for cooling-dominant climates, not the heating-focused ratings you might see on a window sold up north. We quote the U-factor and SHGC for every unit on paper, so you see exactly what you are buying before you sign.
Insulated Laminated Glass
Laminated glass uses an interlayer between two panes to hold the unit together under impact. For Fort Myers, this is not a luxury feature. Every replacement window in Lee County’s HVHZ must carry a large-missile rating, and laminated insulated glass is the standard way to get there while keeping the energy performance of Low-E coatings and argon fill. We install PGT impact-rated laminated units with Miami-Dade NOA numbers documented at inspection.
UV-Blocking & Fade Protection
Fort Myers sun fades furniture, flooring, and artwork faster than most homeowners expect. Low-E coatings with high UV-blocking performance cut the ultraviolet exposure that breaks down fabrics and wood finishes. For homes with east-facing bedrooms off Colonial or west-facing living rooms near the river, we recommend selecting a glass package with a SHGC tuned to the orientation of each opening, not a one-size-fits-all spec applied to every window.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Myers
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, Therma-Tru, and ViewLux. For Fort Myers specifically, PGT and CGI matter most. Both are Florida-based manufacturers whose products are engineered and tested for the wind speeds and missile impacts Lee County sees in a Category 4 storm. We service what these manufacturers build and we stock common replacement components locally, which means a failed latch or a torn weatherstrip does not leave your window open to the salt air for weeks while parts ship from out of state.
When we quote a Fort Myers job, we put the manufacturer line, the glass package, the NOA number, and the design pressure rating side by side on paper. You see what a PGT impact casement costs versus a CGI single-hung, and you see what each one carries for Florida Product Approval documentation. That is a square deal, and it is the only way we quote.
Common Energy-Efficient Windows Problems We See in Fort Myers Homes
- Salt-driven aluminum corrosion and failed seals. Fort Myers sits at the mouth of the Caloosahatchee, minutes from the Gulf. Salt-laden air pits aluminum frames and eats weatherstripping within a decade. We regularly see fogged double-pane glass and failed gaskets on windows that are not even old enough to look worn, because the salt works from the inside out.
- Original jalousie windows bleeding conditioned air. Thousands of Fort Myers CBS homes built in the 1960s through 1980s still have original jalousie windows. They are essentially unsealed openings. No Low-E upgrade, no new AC unit, no attic insulation will fix a house whose windows leak air through every jamb and sash. The openings need to be replaced first.
- Post-Ian permit failures on like-for-like swaps. Since Hurricane Ian made near-direct landfall at Fort Myers Beach in September 2022, Lee County inspectors have tightened enforcement dramatically. A contractor who says they can swap your old aluminum window for a new one without a wind-load calculation or a Florida Product Approval number is setting you up for a failed inspection and a stop-work order.
- Insurance non-renewals tied to window condition. Lee County insurers are now canceling or refusing to renew policies on homes without Florida Product Approved impact-rated windows and doors. This is not a hypothetical risk in Fort Myers. Homeowners here have watched neighbors get cancellation letters. Documented compliance on your windows is now a financial survival issue, not a comfort upgrade.
Pricing for Energy-Efficient Windows in Fort Myers, FL
A typical energy-efficient replacement window in Fort Myers runs $800 to $1,500 per unit installed. Impact-rated single-hung units generally fall between $900 and $1,800. Large or custom openings, such as a picture window facing the river or a corner mitered unit in a mid-century home, run $2,500 to $5,000. Whole-home packages for a standard three-bedroom concrete block house typically land between $8,000 and $25,000 or more, depending on opening count, frame material, and design pressure requirements for your specific wind zone.
What moves the price in Fort Myers: the number of openings, whether your home sits in a higher floor height that increases design pressure, the frame material you choose, and whether the existing openings need structural repair before new units can be set. We quote all of this on paper, line by line, before any work starts. Call (888) 635-0804 to schedule a free in-home measure and written quote.
What Energy-Efficient Windows Costs in Fort Myers
If you are budgeting for replacement windows in Fort Myers, start with these real anchors. Impact windows generally run $800 to $1,500 per window installed. Impact single-hung units run $900 to $1,800. Large or custom openings can run $2,500 to $5,000. Whole-home packages for a typical Fort Myers CBS home run $8,000 to $25,000 and up, and that figure includes the permit, the wind-load calculation, the Florida Product Approval documentation, and the installation labor. Custom fabrication runs 4 to 6 weeks from order to install. Once your units arrive, most jobs are installed in as fast as a single day.
The biggest cost variables in Fort Myers are opening count and wind-zone design pressure. A second-story window on a canal-front home off McGregor carries a higher design pressure than a ground-floor window in a 1970s ranch off Colonial, and the unit you order must match that rating. We measure every opening twice and quote the exact unit specified for your address. The quote you get is the price you pay, no surprise line items on the bill.
Florida Pays You Back
Fort Myers homeowners have access to several incentive programs that can offset the cost of impact-rated energy-efficient windows. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades. Florida exempts impact-resistant windows and doors from sales tax at the state level. The federal 25C energy credit covers 30% of product cost on qualifying energy-efficient units, up to $600 per year. After a wind-mitigation inspection, which typically costs $75 to $150, many Fort Myers homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy. Programs change and carriers set their own final numbers. What we do is document every unit’s NOA number, design pressure rating, and Florida Product Approval so you have the paperwork to apply.
One comparison worth making before you commit: impact windows versus hurricane shutters. Shutters only protect your home when someone is there to hang them, and they do nothing for energy efficiency, air sealing, or insurance credits on windows. Impact windows protect the opening permanently, seal the house against the salt air and humidity every day of the year, and qualify for the insurance documentation Lee County now expects. If you are going to spend money hardening a Fort Myers home, impact-rated Low-E windows do more for the daily comfort and the policy than shutters ever will.
We Also Serve Cities Near Fort Myers
TruePane installs Energy-Efficient Windows in Fort Myers and throughout the surrounding region. Our crews serve Cape Coral, Naples, Clewiston, and Sarasota with the same Florida Product Approval documentation, wind-load calculations, and Done Right Promise we bring to every Fort Myers job. Wherever you live in Lee County or the nearby coast, the standard is the same: if the pane is not true, the job is not done.
Serving Fort Myers, FL - Our Local Coverage Area
We’re based in the Fort Myers area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Fort Myers
Every replacement window in Fort Myers must carry a Florida Product Approval number with a large-missile rating and a design pressure calculation specific to your home’s wind zone and floor height. The inspector will check the Miami-Dade NOA number or Florida Product Approval number against the permit application, and they will verify the design pressure matches the opening. If either document is missing or does not match, the inspection fails and work stops until it is corrected. Call (888) 635-0804 and we will quote a set that includes every document your permit requires.
In most cases, yes, but only if the replacement windows carry the Florida Product Approval and NOA documentation your insurer and Lee County require. A wind-mitigation inspection, typically costing $75 to $150, verifies the openings and qualifies the home for windstorm premium credits that often average around 25% on the windstorm portion. Homeowners who skip the documentation or install non-impact windows get no credit and may face non-renewal. We register both warranty layers and document every NOA number before the truck leaves your driveway.
Because Lee County stopped treating like-for-like aluminum swaps as exempt work after Ian. The county now routinely requires a full permit, a wind-load calculation, and Miami-Dade NOA documentation on replacement windows, even when the new unit looks identical to the old one. A contractor who did not file the calculation or could not produce a Florida Product Approval number left your neighbor with a failed inspection and an unpermitted installation, which can also void the manufacturer warranty. That is the exact situation our paperwork is built to prevent.
Yes, but only when the unit is properly sealed and the frame is correctly set. Low-E coatings reflect solar heat gain in the Southern climate zone, and argon gas fill reduces thermal transfer through the glass. In a Fort Myers home with original single-pane jalousies, the bigger issue is that the openings leak air through the jambs and sashes no matter what glass you put in them. Replacing the entire opening with a properly set, impact-rated Low-E unit addresses both the air leak and the solar gain. That is when the cooling bill actually moves. Call (888) 635-0804 for a free measure and a written quote that includes the glass package specs.
A compliant Fort Myers quote includes the permit fee, the wind-load calculation for your address, the Florida Product Approval number for every unit, the Miami-Dade NOA documentation, and the design pressure rating matched to each opening. It also states the manufacturer warranty terms in writing and registers both warranty layers before the job is done. A cheap quote omits the calculation, skips the permit, and gives you a unit with no NOA number on file. When inspection fails or the insurer asks for documentation, the homeowner holds the loss. Call (888) 635-0804 and we will walk you through what a square deal looks like on paper.
We install and service Energy-Efficient Windows for homeowners throughout Fort Myers, from the riverfront neighborhoods near the Caloosahatchee to the subdivisions off Daniels and Colonial. One job near the river stands out. On a 1980s concrete block home, our crew replaced original single-pane jalousie windows with PGT impact-rated casements using laminated glass interlayers. The project required a wind-load calculation approved by Lee County, and the final inspection documented each unit’s Miami-Dade NOA number. The homeowner used that coverage to secure a wind mitigation discount on their policy. That is the standard we bring to every Fort Myers job.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Myers since 2008.