Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Fairview
Impact window and door replacement in Fairview typically runs $1,800-$3,400 per opening for mid-range impact-rated units, and most jobs we quote are completed in a single visit once materials arrive. If you live on one of the hillside streets above Fairview Drive or near the fire station off Maud Avenue, you already know the real complication: this ground moves. We schedule free estimates across Fairview every week, and a live person answers when you call (888) 635-0804.
We have been opening up Fairview homes long enough to know what waits behind the trim. Cracked drywall at the window corners. Doors that bind in July and swing free in January. Rough openings racked half an inch out of square from decades of Hayward Fault creep. None of that scares us off a quote. It is exactly what we plan for.
Why TruePane Windows & Doors Is Fairview’s Preferred Impact Windows & Doors Company
Dale Kessler founded TruePane in 2008 on a rule he keeps on the whiteboard to this day: if the pane is not true, the job is not done. That rule matters more in Fairview than almost anywhere else in the East Bay. The Hayward Fault runs directly beneath this community, and its creeping segment shifts the ground up to 5 mm per year. A window that is square at install can be racked and binding within a few seasons if the crew does not shim and anchor every jamb properly. Our technicians measure every opening twice, and they know to check for drag on every door before quoting a simple replacement.
We are not the cheapest bid you will get. We are the last call you should need to make. Our Impact Windows & Doors team is background-checked, uniformed, and trained as craftspeople, not sales staff. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and we back the workmanship with a Done Right Promise. If something is not right, we make it right. No paperwork fights. No arguing.
Fairview homeowners have trusted us because we act like a company that plans to be here in thirty years. We sponsor county fairs and church roof funds. We hire local and train apprentices into journeymen. And when you call, a live person picks up, 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form.
Our Impact Windows & Doors Services in Fairview
Impact Sliding Glass Doors
Fairview ranches and split-levels from the 1950s through the 1970s were built around the sliding glass door. The problem is those original aluminum sliders corrode under marine moisture and lose their seal fast. We replace them with Fairview Sliding & Patio Doors-impact-rated sliders sized to the existing opening, then square and shim the frame so it operates smoothly even as the ground beneath Fairview keeps moving. Expect $2,200-$4,800 for a standard 6-foot impact slider, depending on frame material and glass package.

Hurricane Impact Windows
A typical impact window replacement in Fairview runs $1,800-$3,400 per opening installed. That includes the window, tear-out of the old unit, squaring and shimming the rough opening, new flashing tape, and trim replacement where needed. We quote manufacturer lines side by side on paper so you see exactly what you are buying, and we stock fast-turnaround options for the single-pane aluminum windows that dominate Fairview’s original housing stock.

Impact Entry & French Doors
Fairview’s hillside lots mean entry doors take abuse that flatland doors never see. Thermal swings of 25-35°F in summer make frames expand and contract, and the fault creep underneath twists door rough openings over time. We install Custom Windows & Doors in Fairview-impact-rated entry and French doors with heavy-gauge frames and reinforced hinges, then test the swing and latch before we call the job done. Entry door replacements in Fairview typically run $2,800-$5,500, depending on glass configuration and hardware.

Hurricane Shutters & Protection
Not every Fairview home needs full window replacement. For some, hurricane shutters and protection systems are the right call. We install roll-down shutters, accordion shutters, and removable panel systems rated for high-wind and impact conditions. Shutter systems add an extra layer of defense without touching the existing window frames, which matters on older homes where the original rough openings are still sound. Full-home shutter systems in Fairview generally run $4,500-$12,000 depending on opening count and shutter type.

Wind Mitigation & Code Compliance
Fairview sits in Alameda County’s wind and seismic zones, and the permit office expects impact installations to meet current code. We pull permits on every job that requires one, coordinate inspections, and handle the paperwork so you do not have to chase the building department. If your home needs wind mitigation documentation for insurance, we provide what your carrier requires. Most wind mitigation inspections and retrofits in Fairview run $600-$2,500.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fairview
We are an authorized installer for more than a dozen manufacturer lines, and for Fairview homes we recommend the brands that hold up best against marine moisture and thermal cycling. CGI and PGT impact lines have proven themselves on the hillside streets here, and CWS offers strong mid-range value for ranch-style homes where budget matters. We also service and replace ES Windows and ECO Window Systems units when homeowners want a specific look or frame profile. We stock common parts and hardware for Fairview jobs so turnaround stays short, and we quote multiple lines side by side so you can compare what you are actually getting in writing.
Common Impact Windows & Doors Problems We See in Fairview Homes
- Racked rough openings from Hayward Fault creep. Decades of microseismic movement twist door and window frames out of plumb. A new impact window installed without squaring and shimming will bind, leak, or fail its seal within a few years.
- Corroded aluminum frames on 1950s-1970s originals. Fairview’s marine moisture and 25-35°F daily temperature swings accelerate aluminum corrosion and seal failure. Fogged glass between the panes is usually a dead seal on an original single-pane aluminum retrofit.
- Failed flashing and rotted sills on hillside lots. Poor drainage lets water sit behind old flashing tape. By the time the window itself fails, the sill and jamb behind it are often rotting too.
- Drafty doors that bind in summer. Persistent fault movement means a door that hung fine at install can drag within a few seasons. Homeowners often blame the product when the real culprit is a foundation that has shifted a quarter inch.
Pricing for Impact Windows & Doors in Fairview, CA
Fairview’s market runs higher than flatland cities like San Leandro because the labor is harder. Racking, shimming, flashing repair, and re-framing all add time that a simple swap in a newer tract home would not require. Here is what we quote across Fairview today:
- Impact window replacement: $1,800-$3,400 per opening installed
- Impact sliding glass door: $2,200-$4,800 for standard sizes
- Impact entry or French door: $2,800-$5,500 depending on glass and hardware
- Hurricane shutter system: $600-$2,800 per opening, full-home packages from $4,500
- Framing repair or sill rebuild: $450-$1,800 per opening when rot or racking is found
Every quote includes the inspection, detailed line items, and written allowances for framing repairs. If we find a problem behind the wall, it is priced and approved in writing before we touch it. Your bill matches the quote, no change orders added at the end. Call (888) 635-0804 to schedule your free Fairview estimate.
We Also Serve Cities Near Fairview
Our crews work throughout the East Bay and cover Impact Windows & Doors in Fairview plus the surrounding communities. If you are in Parkway, Arden-Arcade, Ladera Heights, or Commerce, the same team, the same pricing, and the same Done Right Promise apply. Dispatch and scheduling are coordinated from our San Francisco Bay Area office, with local crews serving Fairview directly.
Serving Fairview, CA - Our Local Coverage Area
We’re based in the Fairview area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Fairview
Fairview sits directly on the creeping segment of the Hayward Fault, where the ground shifts up to 5 mm per year. Over time that movement racks window and door rough openings out of square, so a proper impact installation here requires shimming and anchoring every jamb. On a flatland job in San Leandro or Fremont, the same window might drop into a square frame without adjustment. Here, skipping that step means binding frames and failed seals within a few years. Call (888) 635-0804 for an exact quote on your home, estimates are free.
Sometimes yes. When we pull original windows from a 1950s or 1960s Fairview ranch, we occasionally find wiring runs through or directly beside the window framing that would not meet current code once the wall is open. If the permit triggers an electrical correction, we price that work in writing before proceeding. It is a known variable on older Fairview homes, and we plan for it in the quote rather than springing it on you mid-job.
In most Fairview homes, fogged glass means the seal on an original single-pane aluminum retrofit has failed, and the frames themselves are usually corroded enough that replacing glass alone is not worth the labor. The better move is full impact-rated replacement with dual-pane, thermally broken frames. That solves the fogging permanently and upgrades the window to current wind and impact code. Call (888) 635-0804 and we will inspect the frames before you spend anything.
Fairview sits where inland heat from the Tri-Valley corridor meets the marine layer through the Hayward-Castro Valley gap, producing 25-35°F daily temperature swings in summer. That thermal cycling expands and contracts aluminum frames significantly, which wears out weatherstripping faster than it would in a stable coastal climate. This is why we recommend thermally broken frames and heavier-gauge weatherstripping on Fairview installs. It is not an upsell. It is the difference between seals that hold for five years and seals that hold for fifteen.
We stop, document what we found, and price the repair in writing before touching anything else. If the sill plate is rotted, the rough opening is racked beyond what shimming can fix, or the framing is undersized for a larger impact unit, you get a line-item quote for the extra framing work. You approve it or you do not, nothing proceeds on assumptions. That is the TruePane way and it is covered by our Done Right Promise once the work is complete.
Contact TruePane Windows & Doors in Fairview
If you live in Fairview and your windows or doors are fogging, binding, or simply past their useful life, call the team that knows this ground. We will come out, measure twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before we leave. A live person answers (888) 635-0804 24 hours a day, seven days a week. Free estimates, fixed pricing, and a square deal on every job.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fairview and the East Bay since 2008.



Before
After
Before
After
Before
After