Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Pacific Grove
Impact window and door replacement in Pacific Grove typically runs $1,400-$4,200 per opening installed, depending on the product line and what our crew finds once the old frame comes out. Most jobs on the Victorian stock near Lighthouse Avenue take one to two days per opening because the rough carpentry usually needs attention before a new impact-rated unit goes in. We’ve worked the blocks between Lovers Point and Asilomar for years, and we know what salt air does to a window that was spec’d for an inland house. Call (888) 635-0804 for a written quote.
Why TruePane Windows & Doors Is Pacific Grove’s Preferred Impact Windows & Doors Company
Pacific Grove homeowners call us because they have lived here long enough to watch a window fail. The fog that rolls past Point Pinos every afternoon is not decorative. It carries salt, and salt finds its way into edge spacers, roller tracks, and hinge pins. Our crews work Pacific Grove regularly, from the cottages along 12th Street to the mid-century ranches back toward the 93950 inland edge, so we arrive already knowing what to look for behind the casing.
Our Impact Windows & Doors team quotes manufacturer lines side by side on paper, so a homeowner sees exactly what a PGT unit costs next to a CGI unit, and why. Both warranty layers get registered in writing before the truck leaves the driveway. That is the Keystone Standard, and it matters more here than almost anywhere else on the Monterey Peninsula.
Pacific Grove is where TruePane’s Done Right Promise gets tested by weather. If a door binds after the first winter storm, we come back and fix it. No paperwork fight. No prorated argument. Dale Kessler has kept the same rule on the whiteboard since 2008: if the pane is not true, the job is not done. We stand behind it.
Key Takeaways
- Impact window and door replacement in Pacific Grove runs $1,400-$4,200 per opening, with marine-grade hardware adding $180-$400 per unit.
- Homes within three blocks of the ocean need stainless or bronze hardware as baseline, not an upgrade, due to salt-driven corrosion.
- Historic Register properties may require wood-clad impact windows or custom millwork instead of standard vinyl.
- Free written estimates with side-by-side manufacturer quotes. Call (888) 635-0804.
Our Impact Windows & Doors Services in Pacific Grove
Hurricane Impact Windows
Older Pacific Grove homes were built for a different climate. Original single-pane wood sashes on a Victorian cottage near Lovers Point cannot hold up to the wind-driven spray that comes off the bay three seasons a year, and most were never flashed correctly in the first place. We replace them with impact-rated units sized to the original rough opening, with wood-clad exteriors where the city’s preservation standards require it. Every install starts with a framing inspection, because the jamb behind a 1910 window is rarely sound.

Impact Sliding Glass Doors
Salt air eats standard roller hardware. It is that simple. Our Sliding & Patio Doors in Pacific Grove are spec’d with stainless rollers and a track that drains properly, because a standard unit facing the ocean on Asilomar Avenue will bind within a few seasons otherwise. We pulled a failed impact sliding door on a 1906 Victorian cottage near Lighthouse Avenue and found the original jamb had rotted behind the flashing tape, letting salt mist wick behind the casing for decades. Our crew rebuilt the rough opening, set a ViewLux impact-rated door with a fusion-welded frame and stainless roller hardware, and rewrapped the opening with flashing tape before cladding. One day, and the moisture cycle stopped for good.

Impact Entry & French Doors
Entry doors on Pacific Grove’s ocean-facing elevations take abuse that inland doors never see. Steel hinges corrode, thresholds sag into rotted sills, and the first sign is usually a door that hangs crooked in July. We install impact-rated entry and French door systems-part of our Custom Windows & Doors in Pacific Grove-with non-corroding hardware as standard on any home within sight of the water. Where an original Victorian door survives, we rebuild the jamb and header rather than hiding the rot with trim.

Impact Garage Doors
A garage door on a 1920s Pacific Grove cottage is often the weakest opening on the house, both for water and wind pressure. We replace panels and tracks, reinforce the header, and run new weatherstripping that actually seals against the fog-driven damp that gets into everything. The goal is a door that closes square in December and opens square in August, every year.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pacific Grove
We are an authorized installer for PGT, CGI, and ES Windows, among more than a dozen lines, and we quote them side by side on paper so you see the actual price difference. Pacific Grove homeowners put more miles on a window in five years than most houses see in twenty, so the product line matters. If you have an existing PGT or CGI unit with a fogged pane on a windward wall, we can often replace the IGU without pulling the whole frame. For Pacific Grove customers, we stock the common marine-grade hardware and gaskets locally, which keeps most service calls to a single visit.
Common Impact Windows & Doors Problems We See in Pacific Grove Homes
- IGU seal failure within 5-8 years on ocean-facing walls. Salt-laden fog condenses on aluminum edge spacers and the seal goes. The glass fogs from the inside, and no amount of cleaning fixes it. It requires an IGU replacement or full sash, and in Pacific Grove it’s not a defect in the window, it’s what standard residential specs do here.
- Rotted wood sashes and jambs on Victorian-era double-hung windows. Where glazing putty has dried and cracked, wind-driven spray wicks into the frame every wet season. By the time the sash sticks, the rot is usually in the jamb too, which is why we inspect the rough opening on every replacement.
- Corroded steel hardware on entry and French doors. The hinge side of an ocean-facing door will bind or snap within a decade in Pacific Grove. We’ve replaced door hardware that had welded itself to the jamb with rust, and we’ve learned to spec stainless or bronze from the first quote.
- Sliding doors that bind after every winter storm. Older tracks collect salt residue and grit, and the metal expands and contracts with the temperature swings between fog and sun. A door that ran smooth in October starts dragging by January. If the rollers are standard steel, the fix is replacement, not lubrication.
Pricing for Impact Windows & Doors in Pacific Grove, CA
A typical single impact window replacement in Pacific Grove runs $1,400-$2,800 installed. A sliding glass door starts around $2,800 and can hit $4,200 when the rough opening needs real reconstruction. Entry and French doors land between $2,200-$3,900 depending on the brand and whether the jamb is sound. Marine-grade hardware adds roughly $180-$400 per opening, and on any home within three blocks of the ocean we recommend it as standard. Historic Register properties with original wood sashes may run higher because of custom millwork and wood-clad product requirements. Every quote is written, line-item, and free. Call (888) 635-0804 to schedule yours.
| Service | Typical Installed Cost in Pacific Grove |
|---|---|
| Impact window (single opening) | $1,400-$2,800 |
| Impact sliding glass door | $2,800-$4,200 |
| Impact entry or French door | $2,200-$3,900 |
| Marine-grade hardware upgrade (per opening) | $180-$400 |
We Also Serve Cities Near Pacific Grove
TruePane serves homeowners from Impact Windows & Doors in Pacific Grove to the surrounding peninsula communities, including Monterey, Seaside, Marina, and Castroville. Each market has its own building quirks and weather patterns, and we quote accordingly, with local crews who know the difference.
Serving Pacific Grove, CA - Our Local Coverage Area
We’re based in the Pacific Grove area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Pacific Grove
Yes, but only if you use the right product. Standard vinyl replacement windows are often prohibited on registered properties. The city’s preservation standards generally require wood-clad or all-wood impact windows on street-facing elevations. We quote wood-clad PGT and CGI units for these homes, and we handle the drawings and paperwork the Historic Register review requires. Call (888) 635-0804 for an exact quote on your cottage, estimates are free.
That is usually a failed or low-quality IGU seal, not a defect in the installation. In Pacific Grove, the fog condenses on the aluminum edge spacer at the base of the sash, and over five to eight years that moisture breaks down the seal. The fix is a replacement IGU or sash with a non-aluminum spacer, and we spec stainless or warm-edge spacers on every ocean-facing install. Call us and we’ll inspect it, the diagnosis is free.
Expect $1,800-$3,200 per opening on most Victorian cottages, with the higher end coming when the jamb is rotted and the rough opening needs reframing. Homes built before 1920 rarely have square openings anymore, so we measure twice and plan for shims, new flashing, and occasional header repair. A written quote lays all of that out before we start. Call (888) 635-0804 for a free estimate on your house.
For a west or northwest-facing wall in Pacific Grove, we recommend a U-factor of 0.30 or lower and an SHGC between 0.25 and 0.35. The fog keeps cooling loads low in summer, but the constant damp means the lower U-factor matters more than in Monterey or Carmel. On a purely north-facing wall you can run a slightly higher SHGC, but never above 0.40. We’ll spec the numbers out per elevation when we quote.
In Pacific Grove, the answer is usually salt-corroded rollers or a warped track, and the two compound each other. As the rollers pit and the track gets pitted with rust, the door gets harder to move every wet season. When a door binds that bad, we replace the rollers with stainless and check the track for level before the door goes back on, just as we do with our Glass Railing Systems in Pacific Grove where corrosion resistance matters. If the track itself is twisted, the whole panel may need to be reset. Call (888) 635-0804 and we’ll tell you which one it is after a single visit.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pacific Grove and the Monterey Peninsula.



Before
After
Before
After
Before
After