Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Richmond
Impact window and door work in Richmond is not a one-spec-fits-all job. The salt air off San Francisco Bay, the fog that settles over the flats most mornings, and the sheer number of 1940s wartime houses in ZIP 94801 change what materials actually hold up here. We’ve been doing Impact Windows & Doors work in Richmond long enough to know that the inland-spec aluminum flashing that works fine in El Sobrante corrodes in five years on a bay-facing wall off Cutting Boulevard. If you need a straight answer on what it takes to install impact-rated units that survive Richmond’s marine climate, call us at (888) 635-0804. We’ll send a uniformed, background-checked technician to measure every opening twice and quote you manufacturer lines side by side on paper. No surprises on the bill, ever.
Why TruePane Windows & Doors Is Richmond’s Preferred Impact Windows & Doors Company
Richmond homeowners who call us tend to have already learned the hard way that not every contractor understands what bay air does to window frames and door thresholds. We do. Dale Kessler founded TruePane in 2008 on a rule that still sits on our whiteboard: if the pane is not true, the job is not done. That rule governs every install we run in Richmond, from a single impact-rated bedroom window near the Richmond Greenway to a full-house retrofit in Point Richmond.
Homeowners in Richmond’s wartime tracts, Marina Bay, and the hills near Wildcat Canyon have told us the same thing: they want a company that still answers the phone when something goes wrong. A live person answers our line 24 hours a day, seven days a week. Not a voicemail tree, not a regional call center. When you call about impact windows or doors in Richmond, you reach someone who knows what a rusted steel casement flange looks like and why it matters.
Every job carries the Done Right Promise, backed by The Keystone Standard. That means both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. We stand behind it. The work. The warranty. The promise. In writing.
Our Impact Windows & Doors Services in Richmond
Hurricane Impact Windows
Impact-rated windows in Richmond do double duty: they hold up to flying debris in a storm and they stop the slow, relentless corrosion that eats standard windows on bay-facing elevations. In the 1940s tracts around Pullman Avenue, we regularly find original steel casement frames rusted through the stucco flange from the outside in. A “simple sash swap” turns into cutting back stucco and rebuilding the rough opening before any impact-rated unit can be properly flashed. We build the opening right, then install the window with stainless steel flashing tape and marine-grade fasteners. That’s the only spec that survives Richmond.
Impact Sliding Glass Doors
Sliding glass doors on the west side of Richmond catch the full force of prevailing westerlies off the bay. Wind-driven rain gets pushed laterally into thresholds and weep holes, and poorly flashed doors rot subfloors within a few seasons. We install impact-rated sliders with properly sloped sills, sealed drainage paths, and flashing that routes water away from the rough opening. If you live in North Richmond, Point Richmond, or anywhere within line of sight of the bay, this is not where you want the cheapest door on the market.
Impact Entry & French Doors
Front doors and French doors on Richmond’s older homes take abuse from both weather and time. Many of the mid-century and wartime houses in the 94801 ZIP still have their original door frames, which have settled and shifted over 80 years. We rebuild thresholds, square the rough opening, and install impact-rated entry and French doors that seal tight against wind-driven rain. The goal is a door that doesn’t bind in July and doesn’t leak in February.
Impact Garage Doors
Impact garage doors matter in Richmond because the garage is often the largest unprotected opening on the house. In a wind event, a failed garage door can compromise the entire structure. We install and service impact-rated garage doors with reinforced tracks and hurricane bracing, sized for the specific wind zone of your Richmond neighborhood. We also carry local parts for Richmond customers, so service doesn’t wait on a shipment from out of state.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Richmond
We’re an authorized installer for more than a dozen manufacturer lines, and for Richmond’s salt-air conditions we often specify CGI, PGT, and ES Windows on impact work. These are frames and glass packages built for marine environments, not inland specs with a coastal label. We stock common parts locally for Richmond customers and quote manufacturer lines side by side on paper, so you see exactly what you’re buying and what each option costs. If you’re comparing impact windows in Richmond, we’ll show you the difference in frame alloy, glazing, and flashing details between a CGI unit and a mainland-only line. The bay-side spec costs more up front, and it is the only spec that lasts.
Common Impact Windows & Doors Problems We See in Richmond Homes
- Rusted steel casement frames on 1940s wartime houses. The original single-pane steel casements in Richmond’s WWII-era worker housing corrode from the inside out. By the time you see rust on the interior, the stucco flange outside is often already crumbling.
- Fogged seals in early aluminum windows. Thin-profile aluminum windows from the 1960s and 1970s corrode at weep holes and jambs in Richmond’s persistent marine humidity. Seal failure and fog between panes follow within a few years.
- Leaking thresholds on bay-facing doors. Driven rain from prevailing westerlies pushes water under poorly flashed door thresholds. The subfloor rots before you see anything wrong from inside.
- Swollen and rotted wood sash in Point Richmond. The late-Victorian and Craftsman-era homes near the water have original wood sash that swells in damp air and binds in summer. Once rot sets in, the window needs more than paint.
Pricing for Impact Windows & Doors in Richmond, CA
Here are straight numbers for the Richmond market. A typical impact-rated window in a 94801 wartime home runs $900 to $2,400 per opening, installed, depending on size and whether the rough opening needs rebuilding. Impact sliding glass doors in Richmond run $3,800 to $8,500, with the higher end covering the bay-side flashing and threshold rebuilds these older homes usually need. Impact entry doors run $2,600 to $6,000. Impact garage doors run $4,500 to $12,000 depending on width and wind-load rating.
The honest variable in Richmond is not the window; it’s the condition of the rough opening. On a 1943 stucco home near Pullman Avenue and 23rd Street, our crew found the original steel casement frames so corroded that the stucco flange crumbled when we removed the sash. We cut back the stucco, repaired the rough opening, and installed double-hung impact-rated units with stainless steel flashing tape and marine-grade fasteners before re-flashing against the bay wind. That job costs more than a swap on a 1990s house with intact openings. It is also the only version of the job that doesn’t fail again in five years.
We give free, written, line-item estimates. No change orders, no surprise line items on the bill. We offer a $50 discount on any repair over $250, a maintenance check, and a permanent 5% discount for seniors and veterans. Call (888) 635-0804 to schedule your free estimate.
We Also Serve Cities Near Richmond
Our crews work across the East Bay shoreline and nearby hills, so if you’re searching for Impact Windows & Doors in Richmond but live just over the line in San Pablo, El Cerrito, El Sobrante, or Albany, we cover those communities too. The same marine-spec materials and the same Done Right standard apply regardless of the city on the permit.
Serving Richmond, CA - Our Local Coverage Area
We’re based in the Richmond area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Richmond
Because the rust starts on the outside, in the stucco flange, where salt-laden bay air and persistent moisture sit against bare steel that never sees paint. The original wartime-era casements were never primed or coated on the flange side, and as the stucco holds moisture against the steel, it rusts from the outside in. Repainting the interior face does nothing to stop it. The fix is removing the old frame, repairing the rough opening, and installing a new impact-rated unit with stainless fasteners and proper flashing. Call (888) 635-0804 for an assessment of your windows, free of charge.
Yes, in almost every case. Richmond’s building department requires permits for window and door replacement when the opening changes, which it usually does when you’re cutting out rusted steel casements and rebuilding the rough opening. We pull the permit, schedule the inspection, and pass it before we consider the job done. No homeowner in Richmond should pay for an unpermitted window swap that bites them at resale. Call (888) 635-0804 and we’ll walk you through what your specific house needs.
The bay-side spec costs more because the materials do. Stainless steel flashing tape, marine-grade fasteners, and frames with true coastal coatings cost more than the inland-spec aluminum and galvanized hardware that most quotes include. On a bay-facing wall in Point Richmond or Marina Bay, the inland spec corrodes within a decade and you pay for the job twice. The cheap spec is the expensive one. We’ll show you both on paper so you can see the difference in writing. Call (888) 635-0804 for a written quote.
Yes, and not because of the impact glass. The dampness and mold smell in Point Richmond homes comes from air and moisture moving through old, leaky wood sash and unsealed rough openings. When we install new impact-rated units with proper flashing and sealing, the air leaks stop, the interior humidity drops, and the smell typically clears within a season. If the wood framing around the window has already rotted, that has to be repaired first. Call (888) 635-0804 for a free assessment.
We cut back the stucco around the opening far enough to expose the flange and find solid framing. We remove the rusted steel, repair or rebuild the rough opening, and fabricate new flanges. Then we flash the opening with stainless steel flashing tape that won’t corrode in Richmond’s bay air, set the new impact-rated unit, and re-flash over the nailing flange before patching the stucco. The flashing is the whole job. If the flashing fails, the window fails. Call (888) 635-0804 and we’ll inspect your openings and explain exactly what’s needed.
When you’re ready to stop patching rusted wartime windows and leaking thresholds, call TruePane Windows & Doors at (888) 635-0804. We’ll come to your Richmond home, measure every opening twice, put the options on paper in front of you, and register both warranty layers in writing before we leave the driveway. We’ve been doing this work since 2008 across these communities, and we plan to be here answering the phone in thirty more.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Richmond since 2008.