Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows & Doors Across Selma
Impact windows and doors in Selma typically cost $850-$1,400 per opening installed, with full-home retrofits on a 1,400-square-foot ranch running $14,000-$22,000. Most Selma homes we work on were built between the 1950s and 1990s with single-pane aluminum sliders, so replacement usually involves more than swapping glass: it means addressing framing, flashing, and the code upgrades a permit triggers once walls are open. Our crews work Selma every week from the Fresno dispatch office, and a live person answers when you call (888) 635-0804. We have been doing this long enough to know exactly what October dust does to a window track on Floral Avenue.
Why TruePane Windows & Doors Is Selma’s Preferred Impact Windows & Doors Company
Selma homeowners have a specific set of problems that don’t show up in coastal markets. The raisin harvest in August and September sends a fine, sticky grape particulate across the entire city. It settles into window tracks, door thresholds, and roller assemblies. By October, we see a spike in service calls from homeowners whose sliders will not move. We have been answering those calls, in person, with uniformed and background-checked technicians, since Dale Kessler founded TruePane in 2008. The company carries years of glazing craft through Dale’s training and the crew he has built around him.
What Selma customers tell us they value most is that we do not treat an install as a transaction. We register both manufacturer warranty layers in writing before the truck leaves the driveway. We put dollar figures on paper side by side so you see exactly which manufacturer line fits your budget. And we back the work with a Done Right Promise that says simply: if it is not done right, we make it right. No paperwork fights. No arguing. That is The Keystone Standard, and it applies to every window and door we set in Selma.
Our Impact Windows & Doors Services in Selma
Our Impact Windows & Doors team handles the full scope of work for Selma’s older housing stock, from single-window replacements to whole-home retrofits that require new framing and flashing. Here is what we do most often in this city.
Hurricane Impact Windows
Most Selma homes still run on original single-pane aluminum sliders, which conduct the Valley’s 105°F summer heat straight into the house and fail to seal against harvest dust. A fusion-welded impact-rated replacement with low-E glass and argon fill changes that immediately. We remove the old aluminum, inspect the rough opening for rot or undersized framing, flash the new jambs properly, and set the window true. The difference in indoor temperature during August is noticeable within the first afternoon.
Impact Sliding Glass Doors
Sliding patio doors in Selma take abuse from two directions: grape dust in the fall and thermal expansion in the summer. The dust grinds down weatherstripping and jams rollers; the heat warps vinyl and loosens seals. Our impact sliding door replacements use reinforced framing and multi-point locking hardware that holds up to both. We also address the threshold, because a door that seals at the sash but leaks under the track is not done right.
Impact Entry & French Doors
The hollow-core exterior doors installed in Selma’s 1960s tract homes were never meant to last fifty years. They bind in July, stick in January, and let dust pour through the jambs during harvest. We replace them with solid-core or fiberglass impact-rated entry systems that are hung and shimmed by hand. Every door gets a threshold that drains away from the house, not toward it.
Impact Garage Doors
Garage doors are the largest uninsulated opening on a Selma ranch home. The original builder-grade panels radiate heat into the garage and often the living space above it. We install impact-rated sectional garage doors with proper perimeter sealing that keeps dust, heat, and the December Tule fog on the outside. It is a durability upgrade and an energy upgrade in the same visit.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Selma
We are an authorized installer for more than a dozen manufacturer lines and we put quotes for PGT, CGI, and ES Windows side by side on paper so you see the actual cost difference, not a sales pitch. We carry local stock for common Selma applications and can turn around most orders without the long factory lead times that stall projects. If a certain line fits your house better, we tell you that. If another one costs less and performs the same, we tell you that too. A square deal is the only kind we offer.
Common Impact Windows & Doors Problems We See in Selma Homes
- Harvest dust jamming sliding hardware. Sticky grape particulate from August and September raisin drying packs into window tracks and door rollers. It grinds weatherstripping down months ahead of normal wear. If your slider takes muscle to open by October, that is why.
- Fogged insulated glass units. The swing from 105°F afternoons to near-freezing Tule fog nights stresses the seal on double-pane units, especially older ones. Once the seal goes, argon leaks out and condensation takes its place. The glass has to be replaced, not cleaned.
- Warped vinyl frames from extreme thermal cycling. Selma’s summers are brutal on low-cost vinyl. Frames warp, corners open, and air leaks develop. A fusion-welded frame resists this far better than the mechanically joined units installed in most Valley tract homes.
- Hidden framing and code-upgrade surprises. Once we open a wall on a 1950s or 1960s ranch, we often find undersized headers, rotted sill plates, or wiring that is not up to current code. The permit process forces these to be corrected. We inspect first and write allowances into the contract so nothing changes without your signed approval.
Pricing for Impact Windows & Doors in Selma, CA
A single impact-rated window replacement in Selma runs $850-$1,400 installed, depending on size and the manufacturer line you choose. Impact sliding glass doors typically run $2,800-$5,500. Entry doors start around $2,200 and climb with hardware and glass options. Full-home retrofits on the modest ranch houses common along Floral Avenue and around downtown generally land between $14,000 and $22,000. What moves the number most is what we find when the old unit comes out: rot, undersized framing, or wiring that must be brought to code. We write those allowances into the contract before work starts, and any surprise is priced and approved in writing before we touch it. Call (888) 635-0804 for a free estimate. We quote on paper, not over the phone, and there is no charge to have a technician measure.
We Also Serve Cities Near Selma
Beyond Selma, our crews regularly work the surrounding agricultural communities of Fowler, Parlier, Kingsburg, and Reedley. The same dust, heat, and housing stock apply throughout this stretch of the San Joaquin Valley. Learn more about our Impact Windows & Doors in Selma coverage and the broader service area we handle from our Central Valley dispatch office.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Selma
The sticky grape particulate from August and September drying operations is the single biggest local failure driver we see. It packs into tracks and thresholds, grinds weatherstripping, and jams sliding hardware weeks after the harvest ends. Our fix combines impact-rated replacement units with upgraded weatherseals and, where needed, new thresholds that drain dry. If your windows and doors are getting harder to operate every fall, call (888) 635-0804 and we will tell you what is actually happening before you spend a dollar.
Yes, and the difference is measurable. Single-pane aluminum frames conduct heat directly into the house. A low-E, argon-filled impact window cuts that transfer significantly, and homeowners report the house staying cooler through 105°F afternoons without the AC running as hard. The energy savings compound every summer and the dust sealing is a year-round benefit. We can show you manufacturer performance data for each line before you commit.
The most common are electrical: when we open walls on a 1950s or 1960s ranch, we frequently find old cloth-insulated wiring that must be brought up to current code before the opening can be closed. We also see undersized headers over larger window openings and rotted sill plates that need replacing. The permit process requires these corrections. That is why we inspect first and write allowances into the contract, so the price you approve is the price you pay. Any change order is priced and signed off before we proceed.
That fog means the seal has failed and the argon or krypton gas has leaked out. It cannot be cleaned from the outside; the glass unit must be replaced. Selma’s extreme thermal swing from summer to winter accelerates seal failure compared to coastal climates. We replace failed units with fusion-welded impact-rated glass and register the new warranty in writing before we leave the driveway. Call (888) 635-0804 for a free estimate on replacement.
Yes, because the value here is not hurricane protection alone; it is what the window does every single day. Impact-rated glass blocks more heat, seals tighter against harvest dust and winter fog, and holds up to the thermal cycles that kill standard windows in this Valley. The hurricane rating is a durability certification. A window built to withstand windborne debris simply has a stronger frame, a better seal, and a longer useful life in Selma’s conditions.
If you live in Selma and your windows are original, fogged, or binding, call (888) 635-0804 to schedule a free estimate. A live person answers. We will measure twice, quote on paper, and register both warranty layers before the truck leaves your driveway. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Selma and the surrounding Central Valley since 2008.