Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Arlington
Window installation in Arlington means working with a city that has its own set of rules, and we’ve learned them the hard way over thousands of service calls. Tarrant County puts Arlington in a wind-debris region, so the adopted 2018 IRC requires replacement windows to carry a design pressure rating of at least DP 50 for most residential exposures. That’s higher than the DP 35-40 you’ll see accepted in some adjacent Dallas County suburbs. If the window doesn’t meet that rating, the city inspector flags it. If the rating isn’t documented, your insurance company can deny the next hail claim. We quote it right the first time because Dale Kessler’s rule hangs over every job: if the pane is not true, the job is not done. Call (888) 635-0804 and you’ll get a live person, not a voicemail tree.
Why TruePane Windows & Doors Is Arlington’s Preferred Window Installation Company
We’ve been installing windows and doors in Arlington long enough to know which houses in the 76010 corridor still have their original 1963 aluminum sliders, and which 1990s subdivisions in 76018 are now aging into fogged-seal territory. That’s not trivia. It’s the difference between quoting a homeowner an insert that won’t pass inspection and quoting a full-frame replacement that holds up when the next hailstorm rolls through.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you’re buying. And they register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s not optional on any job we take in Arlington.
Most window installation work in Arlington is completed in a single visit. We’ll be there when we say. And when the job is done, you have the Done Right Promise behind it. If something’s not right, we make it right. No paperwork fights, no arguing, no fine print that covers neither.
We’re not the cheapest bid in the room, and we don’t try to be. We’re the last call a homeowner needs to make on a window.
Our Window Installation Services in Arlington
Double Hung Windows
Double hung windows are the workhorse of Arlington’s 1960s and 1970s ranch homes, especially in neighborhoods off East Abram Street and Division Street where the original units have been heat-cycled for fifty years. A proper full-frame replacement in these older brick-veneer houses means tearing out the deteriorated rough opening and setting a unit with flashing tape and foam backer rod, not sliding a vinyl insert into a failing aluminum jamb. We quote ViewLux and Ply Gem double hungs at DP 65 because Arlington’s wind-debris exposure demands a margin above the DP 50 minimum. Typical full-frame double hung replacement in Arlington runs $650-$1,100 per opening, installed, depending on glass package and frame material.
Casement Windows
Casement windows make sense in Arlington for two reasons. First, the compression seal closes tighter against the frame than a sliding sash, which matters when a February cold snap like the 2021 Uri event drops temperatures forty degrees in a day. Second, the crank-operated sash gives full ventilation without sacrificing wind resistance, which is why we recommend them for east-facing walls in 76002 and 76018 where storms tend to hit hardest. A standard vinyl casement with low-E glass and argon fill runs $700-$1,250 per window in Arlington, full-frame installed.
Sliding Windows
Sliding windows are common in Arlington’s 1960s ranch stock, and they’re also the window type most likely to fail a wind-load inspection if the replacement wasn’t rated for Tarrant County’s debris zone. We see a lot of older aluminum sliders with corner-joint separation at the sills, caused by decades of heat expansion and mineral corrosion from the area’s hard water. A compliant replacement carries a documented DP 50 or higher, and we set it with new jambs rather than reusing the old frame. Expect $550-$950 per opening for a quality vinyl slider in Arlington.
Fixed and Picture Windows
Fixed and picture windows are where Arlington homeowners get the best value per square foot. No moving parts means fewer failure points, and a large fixed pane with low-E coating cuts solar gain during those triple-digit July afternoons while preserving the sightlines of a brick-veneer ranch’s living room. The tradeoff is ventilation, which is why we often pair a large picture window with flanking casements or a single double hung on each side. Picture windows in Arlington typically run $500-$900 per opening installed, depending on glass size and whether the rough opening needs reframing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
TruePane is an authorized installer for more than a dozen manufacturer lines, and in Arlington we work most often with Ply Gem, PGT, and CGI. PGT and CGI carry the impact-rated and DP-tested lines that make sense given Arlington’s wind-debris code and hail exposure, and Ply Gem’s ViewLux series gives us a strong mid-range option for full-frame replacements in older ranches. We stock common hardware and sash balances for these brands, which means quicker turnaround when an Arlington customer needs a repair rather than a full replacement. We quote manufacturer lines side by side on paper so you can see the actual differences in glass packages, DP ratings, and warranty terms before you write a check. Our Window Installation team handles everything from single-window replacements to whole-house jobs.
Common Window Installation Problems We See in Arlington Homes
- Non-rated vinyl inserts in 1960s aluminum frames. Contractors slide a cheap vinyl sash into the original aluminum jamb, leaving the opening with a U-factor above 0.50 and no documented DP rating. The window doesn’t meet Arlington’s DP 50 minimum, and when the next hail claim hits, the insurance adjuster denies coverage for non-compliant glazing.
- DIY full-frame replacements that skip the permit. Arlington requires a permit for full-frame window replacement, and the city inspector verifies the DP label before finaling the job. An unpermitted replacement resurfaces at resale, and the manufacturer’s storm warranty is void from day one.
- Reusing original 1970s aluminum jambs with new sashes. The old frame’s corner welds are already failing from heat cycling and Tarrant County’s hard-water mineral crust. The new sash may look fine, but the seal fails within two summers and fogged glass shows up by year three.
- Fogged glass in 1990s vinyl-window subdivisions. South Arlington zip codes like 76002 and 76018 are full of 1990s and 2000s vinyl windows now hitting the end of their seal life. In Arlington’s UV-heavy climate, an original seal from 1998 is a coin flip for fog. We replace the insulated glass unit or quote a full opening replacement depending on frame condition.
Pricing for Window Installation in Arlington, TX
Window installation in Arlington runs from about $550 for a small vinyl slider to $1,250 or more for a full-frame casement with premium glass. Single hung and double hung replacements sit in the $650-$1,100 range per opening for full-frame work. Picture windows start around $500 and climb with glass size. Bay and bow windows, which we also install across Arlington, run $2,800-$6,500 depending on depth, glass package, and whether the rough opening needs structural work. These are installed prices that include the permit, the DP-rated unit, flashing, trim, and haul-off. A cheap quote that skips the permit or uses a non-rated insert isn’t cheaper. It just moves the cost to the next insurance claim or resale inspection. Call (888) 635-0804 for a written line-item quote. Estimates are free, and you’ll get both warranty layers registered in writing before the truck leaves your driveway.
We Also Serve Cities Near Arlington
TruePane crews serve Arlington and the surrounding Tarrant County communities. We regularly install windows in Grand Prairie, Kennedale, Euless, and Bedford. Each of those cities falls under its own wind-load and permit requirements, and we quote them accordingly. If you’re just across the Arlington line, call (888) 635-0804 and we’ll tell you straight what your city requires and what it will cost.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Arlington
Arlington’s adopted 2018 IRC requires a design pressure rating of at least DP 50 for most residential replacement windows because the city sits in Tarrant County’s wind-debris region. That’s higher than the DP 35-40 accepted in some adjacent Dallas County suburbs. We quote DP 50 or better on every replacement, and most of our Arlington installs go out at DP 65 because the margin matters when the inspector checks the label and the insurance adjuster reviews the claim. Call (888) 635-0804 to get a quote that includes a documented DP rating.
The DP 50 minimum applies across Arlington’s residential zones, but exposure varies by site conditions. Homes on open lots or at higher elevations in northeast Arlington can face higher wind pressure than sheltered lots in older central neighborhoods. We check the specific exposure for your address before we quote, and we don’t sell a window that meets the minimum if your site calls for more. A conservative rating costs a little more up front and saves a lot on the back end.
Yes. Arlington requires a permit for full-frame window replacements, and the city inspector verifies the DP label on the installed unit before finaling the job. Insert replacements may not require a permit if the existing frame is retained, but we pull permits on every job where they’re required and meet the inspector on site. An unpermitted replacement is a problem that resurfaces at resale and voids the manufacturer’s storm warranty. We don’t leave you holding that.
If your replacement windows lack a documented DP rating that meets Arlington’s wind-debris code, the insurance company can deny the hail claim on non-compliant glazing. That’s a conversation we’ve seen Arlington homeowners have too many times after a storm. A compliant install includes the labeled unit, the permit, and the inspection record, all of which we hand you in writing. That paperwork is what makes the claim hold up. Call (888) 635-0804 to schedule a free estimate and get a quote that includes the documentation.
A compliant Arlington window quote includes the DP-rated unit with the label visible, the permit pulled and the inspection scheduled, flashing tape and foam backer rod at every opening, new jambs where the old ones are compromised, and both manufacturer warranty layers registered in writing. A cheap quote often skips the permit, uses a non-rated insert, reuses failing aluminum jambs, and hands you a warranty card nobody filed. We’d rather show you the difference on paper than explain it after an inspection fails. Estimates are free at (888) 635-0804.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Arlington, TX. Founded in 2008 on a second-generation glazier’s standard: if the pane is not true, the job is not done.