Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Installation Across Irving
Window installation in Irving runs $450-$1,100 per opening for a standard double-hung unit with code-compliant DP 30 framing, and most single-family jobs take one to two days once the permit is approved. TruePane has been working in Irving’s west-side ranch neighborhoods and the Las Colinas towers long enough to know exactly what the city inspector will check and what a cheap bid will skip. Call (888) 635-0804 and a live person answers, 24/7, no voicemail tree.
Irving sits squarely in one of the highest hail-frequency corridors in the country. That changes what we recommend here versus what we recommend in Carrollton or Euless. Spring storm season brings baseball-sized hail across the Metroplex, and a window that meets Irving’s wind-load code is a window that survives the next claim season without an insurance fight.
Why TruePane Windows & Doors Is Irving’s Preferred Window Installation Company
Dale Kessler founded this company on a rule that still governs every job we do in Irving: if the pane is not true, the job is not done. That standard matters most where frame racking is chronic. West Irving’s expansive clay soil shifts foundations year over year, and homes near Story Road, Belt Line, and Rochelle Boulevard carry the evidence in every window jamb. Our crews measure every opening twice, not once, then quote manufacturer lines side by side on paper so you see what you are buying before any work starts.
We hear from Irving homeowners who have lived in the same house for twenty or thirty years. They remember the contractor who swapped glass into old aluminum frames without weep holes and called it a replacement. That work fails within two years here. Our Done Right Promise is in writing, and we register both manufacturer warranty layers before the truck leaves your driveway. No paperwork fights, no arguing.
Every technician who steps onto an Irving job site is background-checked and uniformed, working in your home the way they would work in their own mother’s. We are an authorized installer for more than a dozen manufacturer lines, including, and PGT, so we are not tied to one product line when we recommend a window for a west-facing wall in Irving’s storm path.
Our Window Installation Services in Irving
Irving’s housing stock spans two entirely different window and door markets. The post-WWII brick-veneer ranch neighborhoods of west Irving (75060-75062) still carry original aluminum single-pane windows that were undersized for modern energy codes the day they were nailed in. The Las Colinas corridor (75038-75039) is hitting the 35-to-40-year threshold where entire condo towers with floor-to-ceiling glass and builder-grade sliding patio doors fail at the same time. We work both.
Our Window Installation team handles the full scope of residential replacement work, and the sub-services below cover what Irving homeowners ask about most.
Bay & Bow Windows
Bay and bow windows in Irving are a structural project as much as a glass project. The seat board, the roof cap, and the cantilever framing all need to carry wind load from the north-south storm track, plus decades of clay-soil movement beneath the foundation. On west Irving ranches built in the 1960s, we frequently find the original bay window framing has pulled away from the house by a quarter inch or more. That gap is where water and air get in. We reframe, flash the sill pan, and install a unit rated for the elevation it sits on. A typical bay or bow window replacement in Irving runs $2,800-$6,500 depending on span and seat condition.

Fixed & Picture Windows
Fixed and picture windows are the workhorses of Irving’s mid-century ranches and Las Colinas high-rises. The big fixed units on west-facing walls are the ones hail finds first, and they are also the ones the city inspector checks for DP 30 wind-load compliance. We install fixed windows with laminated or tempered glass where Irving code requires it, and we use a full flashing system with peel-and-stick tape at the sill pan, not just caulk around the trim. A large fixed or picture window replacement in Irving typically runs $600-$2,200 per opening including code-compliant framing.

Sliding Windows
We do more sliding window replacements in Las Colinas than anywhere else in Irving. The 1980s condo towers near Williams Square and the Mandalay Canal were built with sliding windows and sliding balcony doors that share the same original sill pan design. When one unit’s dual-pane glass fogs from seal failure, the adjacent units are usually weeks or months behind it. A single building canvass after one replacement can yield a cluster of 10 to 30 same-model jobs. We stock the replacement hardware and insulated glass units for the common Las Colinas sliding lines, which cuts turnaround time dramatically. Replacement sliding windows in Irving run $500-$1,400 per unit.

Single & Double Hung
Single and double hung windows are the standard replacement choice for west Irving’s ranch homes. The critical detail here is not the sash style; it is the frame rating and the flashing. Many low-cost off-the-shelf double hungs carry a DP 25 rating or no documented rating at all. Irving’s adopted 2021 International Residential Code requires DP 30 minimum on most residential zones. We install Simonton double hungs and other rated units that meet or exceed DP 30, and we document the rating on every quote. A standard double hung replacement in Irving runs $450-$900 per window installed.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We install and service windows from more than a dozen manufacturer lines, and for Irving specifically we keep a strong local inventory of CGI, ES Windows, and ECO Window Systems products. CGI laminated impact units are common requests in west Irving after hailstorm seasons, when homeowners want windows that will not blow out in the next spring storm. ES Windows has the thin-profile, high-glass-area lines that fit the Las Colinas aesthetic without sacrificing structural rating. ECO Window Systems gives us a code-compliant, budget-conscious option for landlords and first-time replacement work where the full architectural glass packages do not make sense. When you call, we quote manufacturer lines side by side on paper so you can see exactly where the dollars go.
Common Window Installation Problems We See in Irving Homes
- Clay-soil frame racking in west Irving ranches. The same expansive clay that shifts Irving foundations also racks every window opening over time. Original aluminum single-pane windows freeze in their jambs, and new installs into unaddressed racked openings will bind at the sash stops within a year. We laser-level every opening before we set the frame.
- Builder-grade sliding windows with no weep system. In west Irving’s 1950s-1970s ranches, the original aluminum frames have no integral weep holes. When a contractor retrofits insulated glass into those old frames instead of doing a full replacement, condensation collects in the jamb pockets and the seal fails within two years. We replace the frame, not just the glass.
- Reused sill pans in Las Colinas condo towers. A cheap sliding window install that reuses the original 1980s sill pan without new flashing tape and a sill-end dam will pass a cursory walk-through but leak at the bottom corners during the first hard wind-driven rain off Lake Carolyn. We replace the sill pan and flash it correctly, and the HOA never calls us back about a stain.
- Unrated window packages that fail Irving’s wind-load inspection. A quote without a DP-rated frame and documented flashing detail will fail the required city inspection for wind-load compliance. That leaves you with an uncertified install that your insurer can cite after the next hailstorm. We quote the rating on paper, every time.
Pricing for Window Installation in Irving, TX
Here are the ranges we see on actual Irving jobs, including code-compliant framing, flashing, and installation labor. These are not teaser prices; they are what you should expect from a licensed contractor who passes the city inspection.
- Standard double-hung replacement on a west Irving ranch: $450-$900 per opening
- Casement or awning window with DP 30+ frame: $700-$1,400 per opening
- Large fixed or picture window: $600-$2,200 per opening
- Sliding window, including Las Colinas condos: $500-$1,400 per unit
- Bay or bow window, reframed and flashed: $2,800-$6,500 per assembly
What changes the price in Irving is the same thing that changes it everywhere: window size, glass package, and structural rating. But here, the structural rating is not optional. A DP 30 frame with argon-filled low-E glass costs more than a big-box DP 25 unit, and the home centers sell the DP 25 unit every day without a word about the inspection it will fail. Call (888) 635-0804 for a free estimate and we will put the rated line items in writing before you decide.
We Also Serve Cities Near Irving
TruePane’s Irving crews also work regularly in Dallas, Coppell, Euless, and Carrollton. The storm-load requirements are similar across the corridor, and we carry the same DP-rated inventory into each city. If you live just outside the Irving boundary line, call (888) 635-0804 and we will schedule a free estimate at your address.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Irving
Yes, Irving requires a permit for window replacement in a single-family home under its adopted 2021 International Residential Code. The inspection checks the nailing fin installation, the flashing details at the sill and jambs, the air-infiltration seal, and the documented wind-load rating of the installed unit. Call (888) 635-0804 and we will handle the permit and the inspection. Our work is done to the point where the inspector signs off on the first visit.
A west-facing wall in west Irving needs a window with a design pressure rating of at least DP 30, and many of our crews recommend DP 35 or higher for full exposure on the storm track. The DP rating is the measure of a window’s structural resistance to wind load, and Irving’s code requires DP 30 minimum in most residential zones. A standard big-box double hung often carries DP 25 or no documented rating at all. Call (888) 635-0804 for a quote that lists the rating on paper.
Las Colinas condo towers near Williams Square and the Mandalay Canal were built between roughly 1980 and 1995 with identical builder-grade sliding windows and balcony doors. Dual-pane seals fail on a schedule, not randomly, and when one unit’s glass fogs from seal failure, the adjacent units are usually weeks or months behind it. That is why a single replacement job in a Las Colinas building often turns into a cluster of 10 to 30 same-model replacements. Call (888) 635-0804 and ask about building canvass pricing if your HOA is seeing this pattern.
Only if the specific model carries a documented DP 30 or higher rating and the installation includes proper flashing at the sill pan and nailing fin. Many off-the-shelf double-hung windows do not meet the DP 30 minimum Irving’s code requires, especially for west-facing walls. We quote rated units as standard in Irving, and we register the rating documentation before we leave the driveway. Call (888) 635-0804 to get a free estimate with the DP rating printed on the quote.
A documented, code-compliant installation gives your insurer a paper trail showing the replacement windows were rated and installed to the city’s adopted code, which strengthens a post-storm claim and can reduce the chances of a denied or reduced settlement. An undocumented or failed-inspection install gives the insurer a reason to challenge the claim. We provide the DP rating, the permit record, and the final inspection sign-off for every Irving job. Call (888) 635-0804 to schedule your free estimate.
Call today and speak to a live person at (888) 635-0804. We will put a free written estimate in your hands, with the DP ratings and the flashing details in black and white, and we will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Irving since 2008.



Before
After
Before
After
Before
After