Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Jacksonville
Window installation in Jacksonville starts with knowing which side of the wind-borne debris boundary your house sits on, because that single line changes what you’re allowed to install and what it will cost. We’ve pulled permits from the beaches to the Westside, and we check the impact zone on every property before we quote. If you’re replacing corroded aluminum sliders in Mandarin, original single-panes in Arlington, or wood windows going soft in Riverside, call (888) 635-0804 and we’ll measure it right the first time.
Why TruePane Windows & Doors Is Jacksonville’s Preferred Window Installation Company
We’re not a franchise operation that parachuted into Jacksonville for the boom. TruePane was founded in 2008 by second-generation glazier Dale Kessler, and the crew that shows up at your door lives in the same Duval County humidity you do. We know that a window tag that passes inspection in Baymeadows can fail in Atlantic Beach, and we know that the salt air off the St. Johns eats aluminum frames faster here than anywhere inland. That local knowledge is the difference between a quote that holds and a change order three weeks into the job.
Jacksonville homeowners keep calling us back for the same reasons: we measure every opening twice, we register both manufacturer warranty layers in writing before the truck leaves your driveway, and the Done Right Promise means if something isn’t right, we fix it. No paperwork fights, no phone tag. A live person answers our phone 24 hours a day, seven days a week. That’s not a sales line. That’s how Dale runs the company.
Our Window Installation team has worked on ranch tract homes in Southside, pre-war bungalows in Springfield, and acreage properties on the county line. Each one has different framing, different setback rules, and different permitting requirements. We scope all of it before you sign anything.
Our Window Installation Services in Jacksonville
Single & Double Hung Windows
Single and double hung windows are the most common replacements we do in Jacksonville, especially in the 1960s through 1990s ranch homes that dominate Southside, Mandarin, and Arlington. The original aluminum single-hungs in these houses are almost always seal-failed by now, and the counterweight springs have usually seized from salt-air corrosion. We replace them with properly flashed, impact-rated or insulated units depending on your wind zone, and we reframe the rough opening when the original sill has gone soft from thirty years of subtropical humidity.
A typical single hung window replacement in Jacksonville runs $700 to $1,300 per window installed, depending on whether you’re on the beach side of the boundary and need laminated impact glass. Double hung runs slightly higher because of the added operating sash.
Horizontal Roller Windows
Horizontal roller windows are everywhere in Jacksonville’s older housing stock, and they fail in predictable ways. The aluminum tracks oxidize, the nylon rollers crumble, and the sashes eventually snap at the corner keys when someone tries to force them open. We see this constantly in Mandarin and Arlington, where salt-laden humidity from the St. Johns sits on the frames year-round. If your horizontal rollers are original to a house built before 2000, they’re almost certainly non-compliant with current Florida Building Code wind requirements.
Replacement horizontal roller windows in Jacksonville typically run $750 to $1,400 per opening installed. The spread depends on whether we’re doing a like-for-like insulated unit or upgrading to PGT WinGuard impact glass with a Florida Product Approval number on file.
3-Panel Sliding (3-Lite Roller) Windows
Three-panel sliders are the big picture windows of Jacksonville’s ranch homes, and they’re also the most expensive opening to get wrong. These units span wide rough openings, which means the header above them has to be sound and the sill has to be dead level or the panels will bind. On older homes in Baymeadows and Southside, we often find the original installation had no proper flashing, and the framing below the sill has been wicking moisture for decades.
We quote 3-panel sliders as complete opening replacements, not just sash swaps. In Jacksonville, plan on $1,600 to $3,200 per 3-lite window installed, more if the rough opening needs reframing or if you’re in the beach-adjacent impact zone. We’ll show you side-by-side quotes for PGT and CGI laminated glass versus insulated glass so you understand exactly what you’re buying.
Casement Windows
Casement windows are the workhorse for Jacksonville homeowners who want real ventilation during the months when the afternoon storms haven’t yet rolled in. They crank outward, catch the breeze from the east, and seal tighter than sliders when closed. The hardware is what fails first here, though. After ten or fifteen years of salt air, the crank mechanisms seize and the hinges in the lower sash doors rust through.
We install casement windows with stainless hardware and full perimeter flashing, because a casement that leaks at the sill in a Jacksonville summer leaks every single afternoon. Casement replacement runs $900 to $1,700 per window installed in Jacksonville, and we’ll register the manufacturer warranty in writing before we leave your driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jacksonville
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Jacksonville homes we recommend products built for this climate. PGT and CGI are the two we quote most often on the east side of town, because both carry Florida Product Approval numbers and Miami-Dade NOA ratings that satisfy Duval County building officials. For interior renovations and standard insulated replacements, we also quote Andersen and Pella units side by side on paper so you see the cost difference in writing. We keep fast-moving parts and hardware in our Jacksonville shop, so when a warranty follow-up or a hardware replacement is needed, we’re not waiting on a freight truck from Ohio.
Common Window Installation Problems We See in Jacksonville Homes
- Salt-air oxidation on aluminum sliders. Homes in Mandarin, Arlington, and anywhere near the St. Johns or the Intracoastal have aluminum window frames that are actively corroding. We’ve pulled sashes where the corner keys snapped the moment we touched them, adding sash replacement to a job the homeowner thought was just a glass swap.
- Non-impact glass quoted on the wrong side of the boundary. Jacksonville is the largest city by land area in the contiguous U.S., and the wind-borne debris region boundary bisects Duval County. We see quotes from out-of-state crews that priced standard insulated glass for a house a half-mile inside the impact zone. The permit gets rejected, and the homeowner starts over.
- Failed seals from daily summer storms. Jacksonville’s humid subtropical climate means intense afternoon rain from June through September. Any window with a marginal glazing seal or improper flashing gets exposed almost immediately. We find interior drywall damage and sill rot behind windows that were only eight years old but flashed wrong.
- Septic and setback surprises on acreage lots. On larger Duval County properties, some crews drop new windows into existing rough openings without checking where the septic tank or drain field sits. When a bedroom egress window ends up facing a leach field that needs a 10-foot separation, the final inspection fails and the homeowner eats the rework.
Pricing for Window Installation in Jacksonville, FL
Window installation in Jacksonville is priced by the opening, not by some vague package number. A simple single hung replacement in a standard ranch opening runs $700 to $1,300. Impact-rated units push that to $900 to $1,800 per window. Large or custom openings like bay windows or 3-panel sliders run $1,600 to $5,000 depending on size, glass package, and wind zone. Whole-home packages in Jacksonville typically land between $8,000 and $25,000 or more, driven by opening count, impact requirements, and framing condition.
What moves the price here more than anything is which side of the wind-borne debris boundary your house sits on. Homes within roughly a mile of the Intracoastal and the beaches need full impact-rated openings, and that adds real cost per window. Setback and septic issues on acreage lots can also add reframing or relocation scope. We give you a written, line-item quote after a free in-home measure, and that’s the number you pay. Call (888) 635-0804 to schedule yours.
We Also Serve Cities Near Jacksonville
While this page is for Window Installation in Jacksonville, our crews also run regular routes to Gainesville, Daytona Beach, Orlando, and Kissimmee. If you’re in one of those cities, the same pricing structure and warranty registration process applies. Call and ask, and we’ll tell you straight.
What Window Installation Costs in Jacksonville
You should be able to budget before you ever pick up a phone. Impact windows in Jacksonville generally run $800 to $1,500 per window installed. Impact single hungs run $900 to $1,800. Large or custom openings, including 3-panel sliders and bay units, run $2,500 to $5,000 per opening. Whole-home packages across a typical Jacksonville ranch run $8,000 to $25,000 or more.
What moves the number: how many openings you have, which wind zone you’re in, floor height (second-story openings add labor and staging), frame material (vinyl versus aluminum versus wood-clad), and whether the existing rough openings need reframing. On acreage properties in Duval County, we also factor septic and well setbacks into the scope before we quote, because if a window has to move off a leach field line, that changes the framing plan and the price. We give you a free in-home measure and a written line-item quote. The number we hand you is the number we build to.
Florida Pays You Back
Jacksonville homeowners can stack real incentives to offset window replacement costs. My Safe Florida Home offers matching grants up to $10,000 for qualifying wind-mitigation upgrades, and impact-resistant windows and doors are exactly the kind of work that qualifies. Florida also exempts impact-resistant windows and doors from sales tax, which is an immediate 6 to 7 percent savings on the product cost depending on local surtax. The federal 25C energy credit can add up to 30 percent of product cost back, capped at $600 per year on qualifying units. And after a wind-mitigation inspection, which runs $75 to $150, many carriers cut the windstorm portion of your premium by around 25 percent when the windows are impact-rated.
We don’t guarantee any specific incentive, because programs and carriers set the final numbers. But we’ll tell you what to ask for, what documentation you’ll need, and we’ll have the Florida Product Approval numbers ready for your inspector and your insurance agent.
Serving Jacksonville, FL - Our Local Coverage Area
We’re based in the Jacksonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Jacksonville
Replacing windows in the same rough openings on a property with a septic system generally doesn’t trigger new septic setback review, but there’s a catch. If you’re enlarging an opening, adding an egress window to a bedroom, or moving a window, the Duval County inspector can require the new opening to maintain the required separation from the drain field. We check the septic as-built drawing and the tank location before we quote, so you don’t get a final inspection that fails over a leach field line. Call (888) 635-0804 for a free measure and we’ll check your specific lot.
It depends on which side of the wind-borne debris boundary your address sits on, not just how far you are from the water. The boundary bisects Jacksonville, and some Westside neighborhoods fall under a lower wind-load threshold while others are still inside the impact zone. We check the exact impact zone for your parcel before we quote. If you’re outside the boundary, standard insulated glass may be fine, and we’ll tell you that straight. If you’re inside, we’ll show you PGT or CGI impact packages with Florida Product Approval numbers and explain the insurance credit you’d be leaving on the table by skipping them.
Yes. A detached structure with a dwelling unit above it is treated differently than a garage or a shed. The apartment needs operable egress windows in any sleeping area, and those openings have to meet minimum clear opening requirements under the Florida Building Code. If the workshop is within the wind-borne debris boundary, the windows also need to be impact-rated or protected. We scope detached ADUs and workshops as their own permit package, with egress sizing and wind-load ratings documented separately. Call us and we’ll walk the property with you.
Yes, in most cases. After the windows are replaced with impact-rated units carrying Florida Product Approval numbers, you schedule a wind-mitigation inspection, which runs $75 to $150. The inspector documents the openings, and many carriers then apply a premium credit to the windstorm portion of your policy, commonly around 25 percent. We can’t guarantee the exact number your carrier will apply, but we give you the documentation they need to evaluate it. That credit, combined with the My Safe Florida Home matching grant and the sales-tax exemption on impact windows, often changes the math significantly on a whole-home package.
In most cases, yes. When the rough opening is square and the framing is sound, we can do a full-frame pull that replaces the window without disturbing the interior drywall beyond the trim. We remove the interior stop, pull the old unit, flash the opening properly, set the new window, and re-install the trim. If there’s hidden rot or if the opening has shifted out of square after sixty years, we’ll tell you before we start cutting, and we’ll show you exactly what needs to change. Full-frame replacement on a 1960s Arlington split-level typically runs $800 to $1,500 per opening installed depending on impact requirements.
If you’re ready to replace windows in Jacksonville, call (888) 635-0804 for a free in-home measure and a written quote. We’ll check your wind zone, your setbacks, and your existing framing, and give you a number you can plan around. That’s the deal.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jacksonville and surrounding communities.