Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across San Bruno
Window installation in San Bruno carries a set of demands most Peninsula cities never see. Homes here sit under SFO’s approach corridors, take direct wind off the San Bruno Gap, and were largely built in the 1950s with single-pane aluminum frames never meant for acoustic or thermal performance. Replacing them correctly means full-frame work, STC-rated glazing, and flashing details that hold up to marine fog. We’ve done that work in Crestmoor, Rollingwood, and the flatlands east of El Camino Real for years. If you’re ready to price the job, call (888) 635-0804 for a free estimate.
Why TruePane Windows & Doors Is San Bruno’s Preferred Window Installation Company
We are not a franchise operation running crews through San Bruno on a rotation. Dale Kessler founded TruePane in 2008 on a rule that still governs every install: if the pane is not true, the job is not done. Our technicians are background-checked, uniformed, and trained to measure every opening twice before ordering a single unit. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it has been our baseline since the first window we set.
San Bruno homeowners call us because we know what these houses actually need. A 1953 tract home in Rollingwood does not get the same window spec as a hillside home in Pacifica. We quote manufacturer lines side by side on paper so you see exactly what you’re buying and what each option costs. Most jobs are completed in a single visit. And a live person answers our phone 24 hours a day, seven days a week. No voicemail tree, no regional call center.
We stand behind the work with our Done Right Promise. If something is not right, we make it right. No paperwork fights, no arguing about whose responsibility it is. That promise is in writing on every proposal we leave in San Bruno.
Our Window Installation Services in San Bruno
Here are the window types we install most often in San Bruno, and what they solve in local homes. Every job is quoted as a full-frame replacement unless an insert is genuinely appropriate, which is rare in this city’s housing stock.
Casement Windows
Casement windows seal tighter than any other operable style because the sash presses against the frame with a continuous compression seal when closed. For homes directly under the SFO departure path, that seal matters more than most people realize. A properly installed casement with laminated glass and argon fill can cut aircraft noise substantially. In San Bruno, casement is our most-recommended window for west-facing walls that take the full force of the Gap wind. Expect to pay $900-$1,800 per opening for a quality casement installed full-frame, depending on glazing and size.
Fixed & Picture Windows
Fixed windows are the workhorse of acoustic performance because they have no operable seam at all. A large picture window with laminated, STC-rated glazing delivers the highest noise reduction any window can provide in a San Bruno living room. We install these frequently on homes in the FAA Part 150 noise-eligible zones, where the window must hit a specific STC rating to qualify for reimbursement. Budget $700-$2,400 per fixed unit in San Bruno. Larger openings near the flight path cost more because the glazing spec is heavier.
Sliding Windows
Sliding windows are an honest, simple design, and they’re common in San Bruno’s mid-century homes because they match the horizontal proportions of that era. But original sliders from the 1950s carry aluminum frames that corrode fast in this city’s fog. We replace them with modern sliders that have interlocking rails and better weatherstripping, and we rebuild the rough opening with flashing tape before setting the new frame. Sliding window replacement in San Bruno typically runs $800-$1,600 per unit full-frame.
Awning Windows
Awning windows hinge at the top and open outward, which gives them a natural advantage in San Bruno’s fog: they can be cracked open for ventilation while the outward-opening sash actually sheds water away from the opening. That makes them a practical choice for kitchens and bathrooms in the flatlands east of El Camino, where fog drips for hours. We install more awning windows on those blocks than anywhere else on the Peninsula. A standard awning window runs $850-$1,700 installed in 94066, depending on finish and glazing.
We also install Window Installation of every other common style: single and double hung, bay and bow, garden and basement windows. The same pricing discipline applies to all of them: a written line-item quote before work starts, and no surprise charges on the final bill.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Bruno
We are an authorized installer for more than a dozen manufacturer lines, and for San Bruno homes we quote most often. For homes in the FAA noise-eligible zones, we spec CGI and CWS laminated units regularly, because those product lines hold up under the acoustic requirements and the wind loads this city throws at them. If a homeowner prefers ES Windows or ECO Window Systems for a custom or coastal-rated build, we quote those too, side by side on paper. We do not push one brand. We show you what each line costs, what the warranty covers, and how long the manufacturer has stood behind it.
Common Window Installation Problems We See in San Bruno Homes
After more than years in this trade across the local communities, here is what we find most often when we open up a San Bruno wall:
- Rotted rough openings from wind-driven fog. The San Bruno Gap funnels Pacific moisture into this city year-round. Original windows often have no flashing tape and no WRB at the rough opening, so the first wet season in a 1950s tract home starts the rot. Full-frame replacement is the only way to fix it properly.
- Insufficient STC ratings near the airport. A standard dual-pane window drops aircraft noise by maybe a third. Homes under the departure corridor need STC 35-40 laminated glazing to make a real difference. We check the FAA noise study before recommending a spec, not after.
- Corroded original aluminum frames. The fog here is not gentle. It carries salt and moisture into every seam. Original aluminum single-hung frames in San Bruno corrode at the corners and weep holes, and once the frame corrodes, the window stops draining and starts failing from the inside out.
- Undersized or damaged framing at the rough opening. This city’s homes were framed fast in the post-war build-out. We regularly find king studs cut short, headers missing, or framing that needs reframing before a modern window will set true. We price the reframing before we start, not as a change order after.
Pricing for Window Installation in San Bruno, CA
Here are real numbers for the San Bruno market, not national averages. A standard full-frame replacement window in this city runs $700-$2,400 per opening installed. Casement windows land between $900 and $1,800. Large fixed picture windows with acoustic glazing for the flight path run higher, often $1,200-$2,400. The biggest cost drivers are full-frame versus insert, glazing spec, and whether the rough opening needs reframing.
| Window Type | San Bruno Price Range (Full-Frame) |
|---|---|
| Casement Window | $900 - $1,800 |
| Fixed / Picture Window | $700 - $2,400 |
| Sliding Window | $800 - $1,600 |
| Awning Window | $850 - $1,700 |
| Single / Double Hung | $750 - $1,500 |
Every estimate we write for San Bruno is a fixed, line-item price. That means the number on the proposal is the number you pay. If we find damaged framing or outdated wiring when we open the wall, the repair is priced and approved by you in writing before we proceed. No surprises on the invoice. Call (888) 635-0804 to schedule your free estimate.
How We Handle What San Bruno Walls Actually Contain
Opening up an older San Bruno home almost never goes as cleanly as a brochure shows. We’ve pulled original windows in Crestmoor and found wall cavities with no flashing tape, jamb extensions rotted through from decades of Gap fog, and wiring that was not touched since Eisenhower was in office. On a 1950s tract home in Crestmoor, we pulled the original aluminum frame single-hungs and found exactly that: no flashing, corrosion from the constant wind-driven moisture, and framing that needed replacement before a modern window could sit level. We installed full-frame Andersen 100 Series casement windows with laminated low-E glass and argon fill, replaced the rotten jamb extensions, and wrapped the rough openings with flashing tape before the new fusion-welded frames went in. The homeowner told us voices from the approach path dropped by half. That is what a proper San Bruno installation looks like.
Here is how we handle surprises. First, we inspect before we quote. We look at the rough opening from the inside where possible and check for water staining, framing damage, and electrical runs in the wall. If we see risk, we write an allowance into the contract with a specific dollar amount and a clear process for approval. If we open the wall and find something not in the allowance, we stop. We show you what we found. We price the fix. We get your written approval before we spend another dollar. No contractor can promise a 70-year-old wall will be perfect inside. What we can promise is that you will never be surprised on the invoice. That is a square deal, and it’s the only way we work in San Bruno.
One more thing worth knowing before you get quotes: if your home is in the FAA Part 150 noise-eligible zone, your window replacement may qualify for federal reimbursement. Those programs require specific STC ratings usually STC 35 to 40 minimum and program-approved manufacturers. If a contractor installs standard dual-pane glass without checking the noise study on file, the job can fail compliance and you lose the reimbursement. We have done enough of these jobs in San Bruno to know exactly what paperwork the airport authority needs and which window specs clear the standard. We handle that for you.
We Also Serve Cities Near San Bruno
TruePane installs windows in San Bruno and throughout the surrounding Peninsula. We serve homeowners in Millbrae, South San Francisco, Pacifica, and Daly City. The same pricing, the same warranty registration, and the same Done Right Promise apply wherever we work. If you are just over the city line, call us at (888) 635-0804 and tell us what you are looking at.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in San Bruno
Only if your home falls within an FAA Part 150 noise-eligible zone and you want to claim the federal reimbursement. Those programs require specific STC ratings, usually STC 35 to 40 minimum, from approved manufacturers. Homes not in the zone can still benefit from acoustic glazing, but the FAA approval requirement does not apply. We check your address against the noise study and tell you exactly what applies to your house. Call (888) 635-0804 and we’ll walk through it.
San Bruno’s post-WWII tract homes still have original single-pane steel or aluminum windows set with no flashing tape and no water-resistant barrier at the rough opening. Pocket inserts leave that original waterproofing breach in place, which lets the San Bruno Gap fog wick into the wall cavity and rot the framing. Full-frame replacement removes the old frame, exposes the rough opening, lets us flash it properly, and gives you a clean thermal and moisture break. For most homes in this city, full-frame is the correct fix. We will tell you plainly if an insert would work in your situation, but in 94066 it usually will not.
San Bruno’s fog and wind accelerate corrosion on aluminum frames and degrade weatherstripping faster than any other city on the Peninsula. We recommend vinyl or composite frames for most replacement work here because they do not corrode and they hold their seal longer in the moisture. Fiberglass is a good option for high-wind exposures. If you want wood, we spec it with exterior cladding. The glazing matters more: laminated glass with argon fill handles both the acoustic load from SFO and the thermal load from the fog. Call (888) 635-0804 to get a specific material recommendation for your block.
We stop and show you what we found. Before we ever start, we include a written allowance in the contract for the most common surprises we see in San Bruno homes: damaged rough openings, missing flashing, outdated wiring near the opening. If we find something outside that allowance, we price it, explain it, and get your written approval before we proceed. You will never pay for a repair you did not approve in writing. This city’s houses are old enough that surprises happen. The difference is whether the contractor handles them honestly. We do.
Yes. Casement windows with laminated acoustic glass perform well on aircraft noise because the compression seal closes the full perimeter of the sash. The measurement that matters is STC: Outdoor/Indoor Transmission Class, which tells you how much sound a window blocks across frequencies. A standard dual-pane window typically tests around STC 26 to 28. Adding laminated glass and a proper frame pushes that to STC 35 to 40. We measure the improvement by the spec before installation, and you will hear the difference on the first evening departure. Call (888) 635-0804 for an exact quote, and ask us to spec your window against the noise study for your block.
Get Your Free Estimate in San Bruno
Window installation in San Bruno is not a generic job. The flight path, the fog, and the framing inside these 1950s walls demand a contractor who knows this city specifically. TruePane has been doing this work since 2008, and Dale Kessler’s rule still governs every opening we touch: if the pane is not true, the job is not done. If you live anywhere in 94066, from Crestmoor to the flatlands east of El Camino, we will come out, inspect your openings, and write you a fixed line-item quote you can keep. It costs nothing and it puts real numbers in front of you. Call (888) 635-0804 to schedule your free estimate. We’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Bruno and the Bay Area since 2008.