Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Selma
Window installation in Selma is not a coastal job. The San Joaquin Valley punishes windows in ways homeowners near the ocean never see: 105-degree summers that warp vinyl frames, Tule fog winters that keep glazing seals damp for weeks, and every October, a fine grape-dust that settles over the whole town and packs itself into window tracks and weatherstripping. We start every Selma job by looking at what your house has actually been through, because a quote that ignores that history is a number pulled out of the air. TruePane Windows & Doors has served Selma homeowners with Window Installation done right, the first time, since 2008. Call (888) 635-0804 for a free estimate.
Why TruePane Windows & Doors Is Selma’s Preferred Window Installation Company
Selma homeowners tend to be wary of window contractors, and for good reason. Many of the original aluminum sliders in this town were installed when the houses were built, and nobody has touched them since. That means when they finally fail, the work involves more than just swapping glass – it involves framing, waterproofing, and sometimes electrical or code corrections nobody saw coming. We’ve worked on enough 1950s-1980s stucco ranches in Selma to know exactly what hides behind those old single-pane units, and we write our quotes accordingly. We don’t bid low and discover problems later. We open the wall with an allowance already in the contract, and any surprise gets priced and approved in writing before we touch it.
Dale Kessler founded TruePane in 2008 because he kept seeing out-of-true installs and voided warranties on jobs other crews had walked away from. The company is built around The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, and a Done Right Promise on every job. If it is not done right, we make it right. No paperwork fights, no arguing. Live person answers the phone 24 hours a day, 7 days a week, and the technicians who show up in Selma are background-checked, uniformed, and trained to measure every opening twice.
We plan to be in the Central Valley for another thirty years. That’s why we hire local apprentices, train them into journeymen, and treat your house like our own mother’s. The Selma homeowners who call us are not looking for the cheapest bid. They’re looking for the last call they’ll need to make on their windows.
Our Window Installation Services in Selma
We install, replace, and service every major window type for Selma’s housing stock. Most of what we do in this city falls into four categories, each with its own local failure mode.
Sliding Windows
Original aluminum sliding windows are the single most common unit in Selma homes built between 1950 and 1990, and they are also the most abused by the local climate. Raisin-drying dust from August and September packing into the bottom track and jamming the rollers is the reason Selma contractors see a post-harvest service spike every October. We replace worn tracks, rollers, and entire slider assemblies, and when a new unit goes in, we flash the perimeter with tape that blocks the harvest particulate for good. A quality vinyl or Milgard sliding window installed in Selma typically runs $450-$950 per unit depending on size and glass package.
Single & Double Hung
Double hung windows are a common upgrade on Selma ranches, especially where the original sliders have failed badly enough that the rough opening needs reframing anyway. The big advantage for Selma is the tilt-in sash: when October dust settles, a double hung is far easier to clean and keeps its weatherstripping intact longer. Single hung units run $350-$800 installed; double hung with a low-E argon package typically falls between $500-$1,100 per unit in the Selma market.
Fixed & Picture Windows
Fixed picture windows bring a lot of heat gain in a 105-degree Selma summer, but the right glass package changes that. Low-E coatings that reject solar heat while letting visible light through make a fixed window a good choice for a living room that faces west onto an unshaded lot. Selma homeowners often combine a large picture window with ventilated casements on either side for airflow during harvest season. Installed fixed and picture windows in Selma generally run $400-$1,800 depending on size and glass specification.
Casement Windows
Casement windows seal tighter than sliders, which matters in a valley where PM2.5 and ozone sit at some of the worst levels in the country year-round. The compression seal a casement achieves when it’s cranked shut blocks dust, pesticide drift, and smoke better than any sliding design. They’re also the easiest window to operate when a slider’s track has been ground down by harvest grit. Casement replacement in Selma typically costs $600-$1,400 per unit installed.
Awning Windows
Awning windows hinge at the top and open outward, which lets Selma homeowners keep air moving even during a light rain. They’re a practical choice over kitchen sinks and in bathrooms where privacy is a factor but ventilation matters in a house that can sit above 100 degrees inside during a July power outage. Awning units in Selma run $550-$1,200 installed, depending on size.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Selma
TruePane is an authorized installer for more than a dozen manufacturer lines, and when a Selma homeowner asks us to quote, PGT, CGI, or ES Windows, we put the options side by side on paper so they can see exactly what they’re buying. For Selma’s dust-heavy environment we often recommend PGT’s impact-rated lines for their seal integrity, and Milgard for the value on double hung and slider conversions. We stock the common replacement parts and hardware those local installs need, which means a worn roller or a failed latch on a PGT slider doesn’t sit for two weeks waiting on a truck from out of state.
Common Window Installation Problems We See in Selma Homes
- Harvest dust failures every October. Raisin-drying operations from August through September deposit a fine, sticky grape-particulate dust across every Selma neighborhood, and it packs into window tracks, door thresholds, and rollers. By the time Halloween arrives, weatherstripping has been ground down and sliding hardware is jamming far ahead of normal wear schedules.
- 130-degree roof heat warping vinyl frames. The attic and roof deck of a Selma ranch can hit 130°F in July and August. That heat radiates down through the head jamb of every window, warping vinyl frames and burning out glazing seals in under a decade. The result is a fogged insulated glass unit with zero insulating value.
- Aluminum sliders conducting afternoon heat inward. Original 1950s-1970s aluminum frames conduct heat directly into the house, and in Selma that means an air conditioner running nonstop from June through September. The frames themselves also corrode from decades of pesticide drift and agricultural chemical exposure, which makes the operable sashes stick and bind.
- Rough opening shift after decades of settling. Selma’s older stucco ranches were often built on expansive clay soils that swell and shrink with irrigation cycles. By the time the windows are 40 or 50 years old, rough openings have often shifted a half inch or more, and no new window will seat properly until the framing is corrected.
Pricing for Window Installation in Selma, CA
A typical single window replacement in Selma runs $350-$1,400 per unit installed, depending on window type, glass package, and what we find when the old unit comes out. A single sliding window replacement is usually on the lower end at $450-$950, while a large fixed picture window with a high-performance low-E package may push toward $1,800. A whole-house replacement on a typical 1960s Selma ranch with 8 to 12 windows generally falls between $6,000 and $18,000. The single biggest price mover in Selma is the condition of the framing and waterproofing hidden behind the old unit. We write inspection findings and allowances into the contract before we start, so when a rough opening has shifted or a header is undersized, the cost is priced and approved in writing before we touch it. Calling (888) 635-0804 gets you a free estimate with the numbers on paper.
We Also Serve Cities Near Selma
TruePane serves Selma and the surrounding Central Valley communities full time. Our crews are on the road between Selma, Fowler, Parlier, Kingsburg, and Reedley every week, and we schedule jobs in each of those cities just like we do in Selma: free estimates, written quotes, and a live person on the phone whenever you call.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Selma
Because Selma’s housing stock is old enough that the wall usually holds more than the window. A 1960s stucco ranch off Floral Avenue has had 60 years of valley heat, Tule fog, and agricultural dust working on its framing and waterproofing. When we pull the original aluminum unit, the most common findings are shifted rough openings, rotted or undersized jambs, failed flashing, and wiring that was outdated when the house was new. A permit triggers code upgrades for electrical and structural work once the wall is open, and those costs are real. The difference with TruePane is that we inspect before we quote, write allowances into the contract, and price every surprise in writing before we touch it. Call (888) 635-0804 for an exact quote.
It is not cosmetic. Original aluminum sliders in Selma conduct afternoon heat directly into the house, corrode from pesticide drift, and jam every October when raisin dust packs the tracks. A slider that has been in place since 1970 has likely lost its glazing seal years ago, which means the argon or air gap between the panes is gone and the window has no insulating value left. Replacing it with a Milgard or PGT double hung with argon-filled low-E glass changes the comfort of the room and knocks the air conditioning load down measurably.
During raisin-drying season from August through September, Selma’s agricultural operations put a fine, sticky grape-particulate dust into the air that settles across the entire city. It packs into window tracks, door thresholds, and roller assemblies, grinding down weatherstripping and jamming sliding hardware. Prevention is threefold: upgrade worn sliders to units with better track seals, plan a track and weatherstripping service call every October after the dust settles, and ask for perimeter flashing at installation that keeps the particulate from entering the rough opening in the first place. Call (888) 635-0804 for an October tune-up.
The combination is the worst possible environment for windows. A 105-degree Selma afternoon pushes vinyl frame material past its rated thermal expansion, and the subsequent December Tule fog cools it fast and keeps it damp for weeks. That thermal cycling is what makes glazing seals fail prematurely and creates the fogged insulated glass units we see on Selma homes that are barely a decade old. The fix is to buy a window with a higher-grade seal system and a frame material rated for the Central Valley’s temperature swing, not the cheapest unit on the shelf.
It often does, and that’s not a bad thing. When a permitted window replacement opens a wall on an older Selma home, the building inspector may require the existing electrical wiring in the wall to be brought up to current code, or may require correction of undersized headers or failed shear bracing. Those upgrades cost money, but they also protect the value of the house. TruePane pulls permits, schedules inspections, and passes them. Estimates are free when you call (888) 635-0804.
Why Selma Homeowners Call TruePane First
We just finished a 1960s stucco ranch on Rose Avenue where decades of raisin dust had ground the original aluminum sliding window jambs into powder. The homeowner had called us for a simple replacement quote. What we found after pulling the first single-pane sashes was a rough opening that had shifted a full half inch. We reframed before setting new Milgard double-hung units with argon-filled low-E glass, then flashed the perimeter with tape to block the harvest particulate for good. That job is the reason we tell Selma homeowners to expect the wall to have something to say, and to hire a crew that knows how to listen to it.
If the pane is not true, the job is not done. That’s the rule that named the company and governs every install we do in Selma. Call (888) 635-0804 for a free estimate, written on paper, with both warranty layers registered before the truck leaves your driveway.
Written by Dale Kessler, Founder and second-generation glazier at TruePane Windows & Doors. Dale leads every inspection and stands behind every window the company installs in Selma, CA.