Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterWindow Replacement Costs in San Bruno, CA
Window replacement in San Bruno typically runs $850-$2,800 per opening installed, depending on whether you need a full-frame job or an insert. Most whole-house projects on the post-WWII tract homes in Crestmoor and Rollingwood land between $12,000 and $28,000. The two biggest factors in this city are acoustic glazing requirements near SFO flight paths and the condition of original 1950s framing. Call (888) 635-0804 for a free line-item estimate.
Fast, Reliable Window Replacement Across San Bruno
We know San Bruno homes because we have worked on hundreds of them. The houses here share a story: built fast in the late 1940s through early 1960s, framed with steel or aluminum single-pane windows that were never meant to last seventy years or block a 737 on approach. When we open a wall in San Bruno, we know what we will likely find. Deteriorated rough openings, failed waterproofing, and wiring that got spliced a few times too many over the decades. Our Window Replacement team handles the full job, from the first measurement to the final trim, including the permit work and the FAA noise-insulation paperwork that matters in this city more than anywhere else on the Peninsula. If you are planning a project in the 94066 zip code, call (888) 635-0804 and ask for a written quote.
Scheduling and dispatch for our crews come from our San Francisco Bay Area office, but the technicians you will see at your door live and work locally. They know what San Bruno fog does to aluminum frames and what SFO departure noise does to a family room at 6 a.m. That local knowledge changes how we spec glass, how we flash openings, and how we talk with you about what the job actually needs.
Why TruePane Windows & Doors Is San Bruno’s Preferred Window Replacement Company
This is a company built by a second-generation glazier, Dale Kessler, who grew up in the trade and has spent years fixing installs that were done wrong by someone else. TruePane Windows & Doors does not chase the cheapest bid. We price the work honestly, state the warranty durations in writing, and stand behind the finished job with the Done Right Promise.
San Bruno homeowners tell us the same thing in different ways: they want a crew that shows up when they say, puts down drop cloths, and does not leave a mess or an argument behind. Our uniformed, background-checked technicians measure every opening twice. They put manufacturer quotes side by side on paper so you see exactly what you are buying. And before the truck leaves your driveway, both manufacturer warranty layers are registered in writing. That is The Keystone Standard. No fine print. No paperwork fight.
We answer the phone. A live person, 24 hours a day, seven days a week. Not a voicemail tree, not a call center in another state. When a San Bruno homeowner calls about a fogged seal or a window that will not latch, the person who answers is someone who can actually help.
Our Window Replacement Services in San Bruno
Full Frame Replacement
Full-frame replacement means we remove the entire existing window down to the rough opening, inspect the framing, repair or sister any deteriorated wood, flash the opening correctly, and set a brand-new unit. In San Bruno, this is usually the right call for post-WWII tract homes that still have original steel or aluminum single-pane windows. Those frames are often corroded from decades of salt-laden marine fog and the wind tunnel effect through the San Bruno Gap. If the frame is compromised, an insert just hides the problem. Full-frame work on a standard double-hung in San Bruno runs $1,400-$2,800 per opening, depending on glazing and condition of the rough opening.
Insert Window Replacement
Insert replacement fits a new window unit inside the existing frame. It costs less upfront, usually $850-$1,600 per opening in San Bruno, and can make sense when the original frame is still square, dry, and structurally sound. We see that most often on homes where previous owners upgraded some windows but left others. The honest caveat: if the jamb framing has rot or the opening is out of true, an insert will not fix the real problem, and wind-driven moisture from the Gap will keep finding its way in.
Storm Window Replacement
San Bruno sits directly under SFO’s primary approach and departure corridors. Aircraft noise is the dominant driver of window replacement demand in this city, which makes acoustic performance a primary spec on many jobs. Storm window replacement here often means upgrading to STC-rated laminated insulated glass units, typically STC 35-40 minimum for homes inside the FAA Part 150 noise-eligible zones. We specify glass that matches the noise study on file with the airport authority, and we order from program-approved manufacturers. A misstep on that paperwork stalls the job and can cost the homeowner federal reimbursement. We handle that entire process.
Energy-Efficient Upgrade
Energy-efficient upgrades in San Bruno mean addressing two things at once: heat loss through old single panes and air infiltration through worn weatherstripping. The heavy marine fog and sustained Pacific winds through the Gap accelerate weatherstripping failure far faster than in neighboring Millbrae or South San Francisco. Upgrading to low-E double-pane or triple-pane units with argon fill typically runs $1,100-$2,200 per opening here, and it is one of the few home improvements that pays back through both comfort and the eventual resale value of a quieter house.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Bruno
TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows. These are brands we recommend regularly for San Bruno homes because they offer laminated acoustic glass packages that meet FAA noise-insulation program requirements. We quote manufacturer lines side by side on paper, so you can compare glazing specs, warranty durations, and price without guesswork. Parts and sashes for common San Bruno installations are ordered quickly through our Bay Area supply chain, which keeps projects moving.
Common Window Replacement Problems We See in San Bruno Homes
- Corroded original steel and aluminum frames: The San Bruno Gap funnels strong, sustained Pacific winds directly into residential neighborhoods. Combined with year-round marine fog, those winds accelerate corrosion on metal frames and degrade weatherstripping seals far faster than in inland Peninsula cities. By the time we quote a home in the flatlands east of El Camino Real, the original frames are usually pitted and binding.
- Deteriorated rough openings hidden behind old frames: Full-frame replacement on post-WWII tract homes in Crestmoor and Rollingwood regularly reveals rotted jamb framing or failed waterproofing that was never visible until the old window came out. That triggers permit-required code upgrades that were not in the initial estimate. We handle this by inspecting first, writing allowances into the contract, and pricing any surprise in writing before we touch it.
- FAA noise-eligible jobs losing reimbursement: Contractors who do not confirm STC ratings or use program-approved manufacturers can stall a job for weeks or cost the homeowner federal reimbursement entirely. We saw this on a Crestmoor project where we replaced original steel single-pane windows with full-frame double-hung units using laminated insulated glass rated STC 38. Because the house sat in the noise-eligible zone, we confirmed the manufacturer was on the airport authority’s approved list before ordering sashes. We also handled the FAA Part 150 reimbursement paperwork so the homeowner did not lose coverage.
- Insert windows over compromised jamb framing: On older San Bruno homes, inserting a new window into framing that has already started to fail lets air and water infiltration continue. Wind-driven moisture from the Gap pushes rain into those joints all winter. That is why we measure, inspect, and give you a straight answer about whether an insert is actually viable on your house, rather than just selling the cheaper option.
Pricing for Window Replacement in San Bruno, CA
Here is what San Bruno homeowners should expect to pay for common window replacement work in 2026.
| Service | Typical San Bruno Price Range |
|---|---|
| Insert window replacement (per opening) | $850-$1,600 |
| Full-frame replacement (per opening) | $1,400-$2,800 |
| STC-rated acoustic upgrade (per opening) | $1,800-$3,200 |
| Whole-house project (8-12 windows) | $12,000-$28,000 |
| Permit fees and structural repairs (if required) | $500-$3,500 |
One thing that surprises San Bruno homeowners is the cost difference between a basic insert job and an FAA-eligible acoustic upgrade. The laminated STC-rated glass alone adds $400-$900 per window, and the program paperwork takes time. Another cost driver is the condition of the rough opening once the old frame comes out. On post-WWII tract homes, we regularly find rotted sill plates or failed flashing that require structural repair before the new unit can be set. That is why our quotes include allowances for exactly that kind of discovery, and why we price surprises in writing before we do the work. Call (888) 635-0804 to schedule a free estimate for your San Bruno home.
We Also Serve Cities Near San Bruno
TruePane handles window replacement across the northern Peninsula. In addition to our work throughout Window Replacement in San Bruno, we serve homeowners in Millbrae, South San Francisco, Pacifica, and Daly City. Each city has its own set of building quirks, from the coastal exposure in Pacifica to the hillside lots in Daly City. We quote them all the same way: inspection first, allowances in writing, and a price that will not move once the job starts.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in San Bruno
Yes, many residential blocks in San Bruno qualify for FAA-funded noise insulation programs, and window replacement is a primary covered item. Homes inside the noise-eligible zones typically need acoustic glazing rated STC 35-40 minimum, using laminated insulated glass units from program-approved manufacturers. The exact STC rating required is tied to the noise study on file with the airport authority, so we confirm that spec before ordering any sashes. Call (888) 635-0804 and we will help you determine eligibility and spec the glass correctly the first time.
Full-frame replacement costs more because we remove the entire existing window down to the rough opening, and on San Bruno tract homes built between the late 1940s and early 1960s, that opening is often not in good shape. Rotted jamb framing, failed waterproofing, and out-of-true openings frequently require structural repair and code upgrades once the old frame is out. Those repairs trigger permits and add materials and labor. An insert never exposes those problems, which is why it costs less, but on many of these homes an insert simply hides the real issue rather than fixing it.
New windows in San Bruno need meticulous flashing and caulking designed for sustained wind-driven moisture. We use a layered flashing approach at the sill, jambs, and head that directs water outward and away from the rough opening, then seal with high-quality exterior-grade caulking rated for continuous exposure to salt-laden fog. The San Bruno Gap wind funnel means ordinary sealing methods fail prematurely. We also verify that the water-resistive barrier is intact before setting the new frame, because that is where wind-driven leaks start.
Yes, in most cases we can match the original sightlines, muntin profiles, and trim details of older San Bruno windows while upgrading to modern glazing and framing. That means you keep the character of the house but gain acoustic insulation, energy efficiency, and operable sashes that actually close. For homes where the original windows have true historic value, we discuss restoration options case by case with a straight answer about what can be saved and what should be replaced.
You will usually see condensation or fog between the glass panes that cannot be wiped off from either side, because the seal between the insulated glass layers has failed. Other signs include drafts you can feel around the sash edges, difficulty opening or closing the window, and a noticeable change in indoor temperature near the window during cold or windy weather. In San Bruno, where wind-driven fog is constant, seal failure also shows up as moisture staining or mildew on the interior side of the frame. Call (888) 635-0804 for an inspection and a written quote if you notice any of these signs.
Contact TruePane Windows & Doors in San Bruno
Planning window replacement in San Bruno means dealing with SFO noise-insulation paperwork, STC-rated glazing, wind-corrosion-resistant framing, and permit-triggered code upgrades. None of that belongs on a generic window replacement page, and none of it should be left to guesswork. We quote the job on paper, register both warranty layers in writing before we leave the driveway, and stand behind the work with the Done Right Promise.
If the pane is not true, the job is not done. That is the rule Dale Kessler keeps on the whiteboard, and it is the standard on every install we do in San Bruno. Call (888) 635-0804 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Bruno and the surrounding Peninsula communities with a craft standard built many years in the trade.