Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Tampa, FL?
Window and door replacement in Tampa typically runs between $350 and $1,800 per window and $800 and $4,500 per door, depending on size, glass type, frame material, and whether the unit needs to meet Florida’s impact-resistance code. Most Tampa homeowners replacing six to eight windows in a mid-size Seminole Heights or South Tampa bungalow spend somewhere between $4,000 and $12,000 installed. Those numbers shift based on what you’re buying and who’s installing it – which is exactly what this guide walks through.
Windows & Doors Cost Breakdown (2026)
The table below reflects installed prices in the Tampa market as of 2026. “Installed” means the old unit out, the new unit in, flashed and sealed, warranties registered. These are not material-only figures.
| Product Type | Low End | High End | Notes |
|---|---|---|---|
| Standard double-hung window (vinyl frame) | $350 | $650 | Most common replacement in older Tampa homes |
| Impact-resistant window (single unit) | $600 | $1,800 | Required in many Hillsborough County high-velocity hurricane zones |
| Casement or awning window | $450 | $900 | Popular in Palma Ceia and Hyde Park renovations |
| Bay or bow window | $1,200 | $3,500 | Structural considerations add labor cost |
| Picture window (fixed, large) | $500 | $1,400 | Often paired with operating units on either side |
| Custom or non-standard size window | $900 | $3,000+ | Common in 1950s-era Tampa construction with odd rough openings |
| Entry door (fiberglass or steel, pre-hung) | $800 | $2,200 | Includes frame, weatherstripping, hardware |
| Impact entry door | $1,400 | $4,500 | Rated to Florida Building Code, common in Beach Park and Davis Islands |
| Sliding patio door (standard) | $1,000 | $2,800 | Aluminum or vinyl frame; multi-panel adds cost |
| Impact sliding or French patio door | $2,000 | $5,500 | Required in many coastal-adjacent Tampa zip codes |
| French door (interior or exterior) | $900 | $3,200 | Exterior units in Tampa almost always need impact glass |
| Whole-house window replacement (8-12 windows) | $5,500 | $18,000 | Project pricing, not per-unit; depends heavily on glass spec |
A few things push costs toward the high end in Tampa specifically. Florida’s wind-load and impact requirements are stricter than most of the country, so the glass itself – laminated, tempered, or both – costs more than a standard double-pane unit bought in, say, Atlanta. Labor in Hillsborough County has also tightened since 2023; good installation crews are busy, and the ones who cut corners tend to be the ones bidding $200 under everyone else. Tampa’s subtropical humidity accelerates frame degradation around poorly installed seals, which means a cheap install today often means a fogged seal or a binding door within three Florida summers.
What Affects Windows & Doors Pricing in Tampa
- Impact vs. non-impact glass: Hillsborough County’s Florida Building Code requirements push most Tampa homeowners toward impact-rated units, especially within a mile of Tampa Bay or Old Tampa Bay. Impact glass adds $150 to $600 per unit over standard double-pane, but it eliminates the need for separate storm shutters and often qualifies for homeowner’s insurance credits – sometimes enough to offset the cost difference over five years.
- Frame material: Vinyl is the most common and most affordable frame material in Tampa. Aluminum frames cost more and are better suited to commercial applications or period-accurate historic district homes in Ybor City. Wood or fiberglass frames – favored in Palma Ceia craftsman homes – run 30 to 60 percent more than comparable vinyl units.
- Window size and configuration: A standard 3×4 double-hung is priced differently than a 4×6 picture unit or a non-standard rough opening left over from 1960s construction. Older homes in Seminole Heights and Riverside Heights regularly present odd-sized openings that require custom or modified units, which extends lead time and raises material cost.
- Number of units and project scope: Replacing one window costs more per unit than replacing eight at once. When we schedule a full-house replacement, truck time, permit fees, and cleanup are distributed across the whole job. A homeowner replacing all ten windows in a Carrollwood ranch typically pays 15 to 25 percent less per window than a neighbor replacing just two.
- Permit requirements: Most window and door replacements in Tampa require a Hillsborough County building permit, particularly if the opening size changes or if impact-rated units are being installed. Permit fees in Hillsborough County typically run $75 to $250 per project depending on scope. Any contractor who suggests skipping the permit is saving himself time and leaving you with an unpermitted install that can complicate a future home sale.
- Manufacturer line and product tier: An Andersen 400 Series casement and a builder-grade vinyl unit from a regional supplier are both “windows,” but they are not the same window. We’re authorized installers for more than a dozen lines – including PGT, and CGI – and we put quotes for comparable units side by side on paper so you can see exactly what each tier buys you. The difference between mid-grade and premium is usually $150 to $400 per unit; the difference in performance in a Tampa summer is more meaningful than that spread suggests.
How to Save on Windows & Doors in Tampa
There are genuine ways to reduce your total cost – and there are false economies that cost more to fix than they saved. Here is the honest version.
Replace multiple units at once. If three windows in your Westchase home are failing and two more are getting there, replacing all five in one visit lowers your per-unit cost, reduces the number of permit applications, and keeps the crew from coming back six months later when labor rates may be higher. We see this most often with homeowners in 1970s and 1980s Tampa subdivisions where all the original units are the same age.
Ask about manufacturer rebates and Florida energy incentives. Several manufacturers – including Andersen and Pella – run seasonal rebate programs, and certain ENERGY STAR-certified windows qualify for federal tax credits under current law. The credit amount changes with tax code updates, so verify the current figure with your tax preparer, but $150 to $600 in federal credits on a qualifying project is real money worth asking about.
Check your homeowner’s insurance before you buy. In Tampa, replacing standard windows with impact-rated units from a line like PGT or CGI can reduce your windstorm premium. Some Hillsborough County homeowners recover $300 to $800 annually in insurance savings after upgrading to impact glass. That changes the math on the higher upfront cost considerably.
Take the senior or veteran discount. TruePane offers a permanent 5% discount for seniors and veterans on every job, not just select products. If you or your spouse qualify, mention it when you call – it applies to the whole invoice.
Get the a free written repair estimate. If what you need is a repair rather than a full replacement – a failed seal, a broken operator, a door that binds in the August humidity – our standing offer is a free written repair estimate. A fogged window or a sticking sliding door in Temple Terrace doesn’t always mean full replacement, and we’ll tell you honestly which way to go.
Start with a free estimate. The most expensive mistake Tampa homeowners make is buying a window or door before measuring the opening carefully and understanding what the Florida Building Code requires for that specific location. Our estimates are free, in writing, and show you manufacturer lines compared side by side. Call us at (888) 635-0804 and a live person will answer – not a form, not a callback queue.
FAQs – Windows & Doors Cost in Tampa
How much does a single window replacement cost in Tampa, FL?
A single window replacement in Tampa runs $350 to $1,800 installed, depending on size, frame material, and whether impact glass is required. A standard vinyl double-hung in a newer Carrollwood home typically lands between $400 and $600. An impact-rated unit for a home near Bayshore Boulevard or Davis Islands will run $700 to $1,500 or more for a mid-size opening. Call (888) 635-0804 for a free written estimate on your specific unit – the price range narrows considerably once we know the opening size and what the code requires for your address.
Is it cheaper to repair or replace a window in Tampa?
Repair is almost always cheaper when the frame and sash are structurally sound and only the seal or hardware has failed. A fogged double-pane seal replacement in Tampa typically costs $150 to $300 per unit. A broken operator or balance spring runs $80 to $180. Replacement makes more financial sense when the frame has rotted or warped – which happens faster in Tampa’s humidity than most homeowners expect – or when the unit doesn’t meet current impact requirements and you’re planning to sell or reroof. We’ll give you a straight answer on which direction makes sense before we quote anything. Call (888) 635-0804 for a free assessment.
Do I need impact windows in Tampa, FL?
It depends on your specific address, but most Tampa homes within wind-borne debris regions defined by the Florida Building Code are required to use impact-rated or otherwise protected openings when windows are replaced with a permit. Hillsborough County generally falls under the Florida Building Code’s requirements, and many Tampa neighborhoods – particularly those close to the bay or in older construction zones – require impact glass on new installations. Skipping the permit to avoid the requirement is a risk that follows the property, not the contractor. We’ll pull the applicable code for your address during the estimate.
How long does window or door installation take in Tampa?
Most single-window or single-door replacements take 2 to 4 hours. A full-house replacement of 8 to 12 windows is typically a one-day job for a prepared crew. We measure every opening twice before ordering product, which means the unit arrives ready to set – no field-cutting the frame because someone eyeballed the rough opening. Lead time from order to install is currently running 2 to 6 weeks depending on the manufacturer line and whether custom sizing is involved. Both warranty layers are registered before the truck leaves your driveway.
What warranty covers new windows and doors installed in Tampa?
Warranty coverage has two layers: the manufacturer’s product warranty (which varies by line and product tier – Andersen, Pella, and Marvin all carry different terms) and the installer’s workmanship warranty. At TruePane, every job is covered by The Keystone Standard: both warranty layers registered in writing, durations stated, before we leave the driveway – plus our own Done Right Promise on the workmanship itself. If something isn’t right within 90 days of installation, we make it right without paperwork fights or fine print that somehow covers neither party. You’ll have the documentation in hand, not in a drawer at our office. Call (888) 635-0804 with any warranty question – a live person answers every call.
Why Tampa Homeowners Call TruePane
Dale Kessler started TruePane in 2008 with a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That rule came from years of watching homeowners get left with fogged seals, binding doors in July, and warranties that were never registered by the installer who cashed the check. The company he built fixes that – not with marketing language, but with a specific written promise on every job.
We serve Tampa neighborhoods from Seminole Heights to South Tampa to Westchase to Temple Terrace, and we’re an authorized installer for more than a dozen manufacturer lines. That means we can quote Andersen against PGT against CGI on the same piece of paper, in the same visit, and let you decide what the difference is worth. We hire local, train apprentices into journeymen, and sponsor county fairs and church roof funds because we plan to be here in thirty years – not because it looks good on a website.
Our technicians are background-checked and uniformed. They measure every opening twice. They register both warranty layers before the truck leaves your driveway. And if you call at 10 o’clock at night with a door that won’t close, a live person answers.
If you’re a Tampa homeowner who’s been burned by a contractor who left and didn’t come back, or a bid that turned into a different number on the invoice, we understand why you’re reading this carefully. That’s the right instinct. Visit our home page to learn more about how we work, then call us when you’re ready. There’s no pressure and no pitch – just a straight answer about what your project will cost and what you’ll get for it.
Ready to Get a Real Number?
Estimates at TruePane are free, in writing, and presented with manufacturer lines compared side by side so you can see exactly what each option costs and what it covers. We serve Tampa and the surrounding Hillsborough County area, and a live person answers every call around the clock. Call (888) 635-0804 to schedule your free estimate – no forms, no callbacks, no waiting.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tampa, FL since 2008.
Pricing reflects the Tampa market as of 2026. TruePane Windows & Doors offers free estimates – call (888) 635-0804.
What Our Customers Say
"Our bay window had rotted at the sill and two other outfits wanted to talk us into a flat picture window instead. TruePane rebuilt the opening and matched the original look. Neighbors have knocked on the door about it."
- Gene A."Two entry doors. Showed up when they said, second day was a half day like they said, and the painter they recommended confirmed the frames were dead plumb. The financing was explained in actual dollars, not a brochure."
- Janet R."Impact windows on the whole house. They handled the permit, the inspection, and gave me a folder with every approval number for the insurance company. My windstorm premium dropped enough to notice."
- Bill T.