Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Jacksonville?
Window and door replacement in Jacksonville, FL typically runs $300 to $1,800 per window and $800 to $4,500 per door, depending on size, glass type, frame material, and whether the opening needs impact-rated glazing. Most Jacksonville homeowners replacing six to ten windows on a mid-size home spend between $4,500 and $14,000 installed, with impact windows on the higher end of that range. Those numbers include materials and professional installation – not just the unit price you see on a manufacturer’s website.
Windows & Doors Cost Breakdown (2026)
The table below reflects what Jacksonville homeowners are actually paying in 2026 – not national averages pulled from a data aggregator. Prices include installation labor, standard hardware, and basic trim work. They do not include structural modifications, permit fees (more on those below), or specialty glass upgrades beyond what is noted.
| Product Type | Low End | High End | Notes |
|---|---|---|---|
| Single-hung window (vinyl, standard size) | $300 | $650 | Most common replacement window in older Jacksonville neighborhoods |
| Double-hung window (vinyl or aluminum) | $450 | $950 | Easier to clean; common in Mandarin and Southside ranch homes |
| Impact-rated single window (PGT, CGI) | $650 | $1,800 | Required or strongly advisable within 1 mile of the St. Johns River and coastal zones |
| Casement or awning window | $500 | $1,200 | Popular in newer Nocatee and eTown builds |
| Picture / fixed window | $350 | $900 | No moving parts; often used in combination units |
| Bay or bow window (3-5 lite) | $1,800 | $5,500 | Structural support often required; adds framing cost |
| Entry door (fiberglass or steel, standard) | $800 | $2,400 | Includes lockset and standard weatherstripping |
| Impact entry door (Andersen, Pella, CGI) | $1,800 | $4,500 | Meets Florida Building Code for high-velocity hurricane zones |
| Sliding glass / patio door (non-impact) | $900 | $2,200 | Common in Arlington and San Marco homes built 1970-1995 |
| Sliding glass / patio door (impact-rated) | $1,500 | $4,000 | Required in many coastal Duval County wind zones |
| French door (interior or exterior, standard) | $1,200 | $3,200 | Pair pricing; hardware and hinges included |
| Whole-house window package (8-12 windows) | $5,500 | $18,000 | Multi-unit discounts typically apply at 6+ openings |
A few things drive those ranges. Frame material is the first lever: vinyl frames cost less up front and hold up well in Jacksonville’s humidity, while wood-clad frames from lines like Marvin or Andersen A-Series carry a premium that is usually justified on historic homes in Riverside or Avondale where HOA guidelines restrict vinyl. Glass package is the second lever: a standard double-pane low-e unit is the baseline, but upgrading to impact laminated glass – which Duval County wind maps increasingly call for – adds 30 to 60 percent to the unit cost. The third lever is labor complexity: a straightforward pocket replacement in a wood frame goes faster than a full-frame tear-out on a home with rotted sill plates, which we see regularly in older San Marco and Ortega properties that have absorbed decades of Florida humidity through original aluminum frames.
What Affects Windows & Doors Pricing in Jacksonville
- Impact rating requirements: Duval County’s wind speed maps place much of Jacksonville’s coastal and near-coastal area – including areas along the Intracoastal Waterway, Beach Boulevard corridor, and the Atlantic Beach and Neptune Beach sections that fall within Jacksonville’s metro – in zones where impact-rated glazing is either required by code or strongly advisable. Standard double-pane units will not pass inspection in those areas, so the conversation starts at impact pricing before any other upgrade is discussed.
- Florida Building Code permits: Any full-frame window or door replacement in Jacksonville requires a permit through the City of Jacksonville Building Inspection Division. Permit fees typically run $75 to $200 per opening for residential work, and the cost of the inspection visit is usually bundled by the contractor. Homeowners who hire someone willing to skip the permit often discover the omission when they go to sell – a problem we fix, though it costs more to fix after the fact than to do right the first time.
- Frame condition and rot: Jacksonville’s subtropical climate – an average of 54 inches of rainfall per year and humidity that rarely drops below 60 percent – accelerates wood frame deterioration. Rotted sill plates or head frames require carpentry repair before a new unit can be set properly. In neighborhoods like Ortega Forest and Fleming Island with mature tree canopy and shaded exposures, we find rot in roughly one out of every three full-frame replacements. That work is billed separately and quoted before we start.
- Manufacturer line and product tier: At TruePane we are authorized installers for more than a dozen lines -, PGT, CGI, ES Windows, and others – and we quote them side by side on paper so the homeowner sees exactly what they are buying. A PGT WinGuard unit and a CGI Guardian unit may perform similarly for wind resistance but carry different price points; an Andersen 400 Series and an Andersen E-Series sit at different levels of the same manufacturer’s catalog. The right choice depends on the opening, the HOA, and the budget.
- Number of openings: Most contractors, including TruePane, apply a per-unit efficiency discount starting at six or more openings on a single visit. A homeowner replacing twelve windows pays a lower per-window labor rate than one replacing two. If a partial replacement is all the budget allows this year, it is worth knowing which windows are performing worst and prioritizing those – we can walk through that with you on the free estimate visit.
- Custom sizing or specialty shapes: Older Jacksonville homes – particularly those built in the 1950s and 1960s in Ortega, Avondale, and the Springfield Historic District – often have non-standard rough opening sizes. Custom-ordered units take longer and cost more than catalog sizes. Specialty shapes like arched tops or trapezoids, common in certain Mandarin developments from the 1990s, add 20 to 40 percent to the unit cost over a comparable rectangular window.
How to Save on Windows & Doors in Jacksonville
The most reliable way to reduce cost without compromising the result is to replace more openings at once. Labor is the biggest variable a contractor controls, and the per-opening cost drops when the crew stays on-site longer. A homeowner who does six windows instead of two on the first call often pays 15 to 20 percent less per unit on labor. It does not always make sense to rush a full-house replacement, but if you have been putting off three or four windows that all need work, bundling them is worth doing.
Second: be honest about which features you actually need versus which ones are being sold to you. Impact glass is not optional in certain Duval County wind zones – but triple-pane glass, which adds cost and weight, is rarely justified in Jacksonville’s climate, where the primary performance concern is humidity control and storm resistance rather than thermal insulation against sub-zero winters. A good installer will tell you when an upgrade earns its price and when it does not.
Third: ask about timing. Window and door manufacturers run factory rebate programs, and authorized installers have advance notice of those windows. TruePane maintains standing promotions worth knowing about: a free written repair estimate, an maintenance check, and a permanent 5% discount for seniors and veterans. Those are the offers we stand behind in writing – nothing else, nothing invented.
Finally, get the estimate in writing before agreeing to anything. A verbal price for a window job is not a price. At TruePane, the estimate visit is free, the quote is on paper, and the line items are explained – so you know what the frame repair costs separately from the unit cost, and there are no surprise additions on the day of installation. Call (888) 635-0804 to schedule yours at no charge.
For a broader look at everything TruePane does – from glass railing systems to fully custom windows and doors – visit our home page.
FAQs – Windows & Doors Cost in Jacksonville
How much does it cost to replace a single window in Jacksonville?
A single window replacement in Jacksonville runs $300 to $1,800 installed, depending on size, frame material, and glass type. A standard vinyl double-hung in a typical Southside or Mandarin ranch home lands between $450 and $750. Impact-rated windows start closer to $650 and climb from there based on the manufacturer line. Call (888) 635-0804 for a free on-site estimate – the number on paper is more useful than any range in an article.
Do I need a permit to replace windows or doors in Jacksonville, FL?
Yes – any full-frame window or exterior door replacement in Jacksonville requires a permit through the City of Jacksonville Building Inspection Division. Permit fees for residential work typically run $75 to $200 per opening. Pocket replacements (insert replacements into an existing frame) have a lower threshold, but the rule of thumb is: if structural framing is touched, a permit is required. TruePane handles the permit application as part of the job – it is not an add-on you manage separately.
Are impact windows required in Jacksonville?
In many parts of Jacksonville, yes. Duval County’s wind speed contours place coastal and near-coastal areas – including zones along the St. Johns River, the Intracoastal Waterway, and Atlantic Beach – in categories where the Florida Building Code requires impact-rated glazing or an approved storm shutter system. For homes farther inland in areas like Westside, Baldwin, or northwest Jacksonville, standard insulated glass may still meet code, but impact glass is increasingly the preferred choice for insurance premium purposes. We check the wind zone for your specific address as part of the free estimate.
How much does a new front door cost in Jacksonville?
A standard fiberglass or steel entry door installed in Jacksonville runs $800 to $2,400. An impact-rated entry door – which meets Florida Building Code requirements for high-velocity hurricane zones and is what most Jacksonville insurance carriers prefer to see – runs $1,800 to $4,500 installed, depending on the manufacturer line (Andersen, Pella, CGI, and others) and hardware selections. If the existing door frame shows rot or is out of square – common in Jacksonville homes built before 1985 – frame repair is quoted separately before the job starts. Call (888) 635-0804 for exact pricing on your opening.
Is it cheaper to repair or replace a window in Jacksonville?
Repair costs $75 to $350 for most common problems – failed seals causing fogging, broken balance systems, damaged hardware, or minor frame rot caught early. Replacement makes more financial sense when the frame itself is structurally compromised, when the unit is a single-pane original that is driving up energy bills, or when the window is more than 25 years old and repair parts are no longer stocked. In Jacksonville’s climate, aluminum single-pane windows from the 1970s and 1980s are almost always better replaced than repaired – the energy savings alone typically pay back the cost within five to seven years. If you are not sure which applies, the estimate visit is free and we will give you a straight answer either way.
Key Takeaways
- Window replacement in Jacksonville runs $300 to $1,800 per window installed; door replacement runs $800 to $4,500 installed.
- Impact-rated glazing is required by Florida Building Code in many Duval County wind zones – confirm your address’s wind category before choosing a glass package.
- Permits are required for full-frame replacements in Jacksonville; TruePane handles the application as part of the job.
- Replacing six or more openings in a single visit reduces per-unit labor cost by 15 to 20 percent in most cases.
- Frame rot, custom sizing, and structural modifications are the most common sources of cost above the initial range – all of these are quoted before work begins, not added to the bill afterward.
- TruePane’s standing discounts: a free written repair estimate; maintenance check; 5% permanent discount for seniors and veterans.
- Every TruePane installation is covered by the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing before the truck leaves the driveway.
Dale Kessler started TruePane in 2008 with a straightforward conviction: out-of-true installs and voided warranties were problems worth fixing permanently. More than years of glazier experience backs every estimate, every install, and every warranty registration. When you call, a live person answers – not a voicemail, not a form, not a callback queue. If the pane is not true, the job is not done.
Call (888) 635-0804 to schedule your free estimate. There is no obligation, no pressure, and no line items that appear later that were not on the quote you approved.
Pricing reflects the Jacksonville market as of 2026. TruePane Windows & Doors offers free estimates – call (888) 635-0804.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jacksonville, FL since 2008.
What Our Customers Say
"Our bay window had rotted at the sill and two other outfits wanted to talk us into a flat picture window instead. TruePane rebuilt the opening and matched the original look. Neighbors have knocked on the door about it."
- Gene A."Two entry doors. Showed up when they said, second day was a half day like they said, and the painter they recommended confirmed the frames were dead plumb. The financing was explained in actual dollars, not a brochure."
- Janet R."Impact windows on the whole house. They handled the permit, the inspection, and gave me a folder with every approval number for the insurance company. My windstorm premium dropped enough to notice."
- Bill T.