Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Windows & Doors in San Antonio, OH | TruePane Windows & Doors
We service CWS windows and doors across San Antonio, and we do it as an independent provider, not a manufacturer-authorized dealer. The difference matters here more than most places because San Antonio’s historic districts and expansive clay soils create a specific set of failures we see on CWS equipment week after week. If your CWS windows fog, bind, or refuse to lock, call (888) 635-0804 and we’ll give you a straight answer about what’s actually wrong.
Why San Antonio Residents Choose Us for CWS Service
Our techs have replaced or repaired hundreds of CWS windows and doors across San Antonio’s historic districts, from single-hung sash units in King William to aluminum storefront doors in Government Hill, all while working through Certificates of Appropriateness and the frame racking that comes with black-clay soil. Dale Kessler grew up in Clintonville watching his father spend thirty years doing glass work on older homes with original wood frames, then put in close to three decades on San Antonio Window Installation and doors himself. That background matters when a CWS unit in a 1910 bungalow needs a jamb re-shimmed and not just a new balance. We carry OEM CWS hardware where it counts and we keep aftermarket equivalents on hand for the parts CWS no longer stocks, which means we’re not waiting on a warehouse in another state when your window won’t stay up.
Common CWS Windows & Doors Problems We Solve in San Antonio
Here’s what we see most often on CWS products in this city, and why the local conditions make each one worse.
- IGU seal failure and fogging on CWS casements and sliders. San Antonio’s summers routinely push past 100°F, and the UV load combined with high attic-adjacent temperatures breaks down low-quality seals inside four to six years. A fogged CWS casement in Monte Vista is usually a failed IGU, not a cleaning problem.
- Racked double hungs and sliders from expansive clay. The Balcones Fault Zone under San Antonio’s inner neighborhoods means the ground swells and shrinks seasonally. CWS 190 double hungs start binding mid-travel or refuse to lock until we pull the frame and re-shim it square.
- Worn balance springs on CWS 190 double hungs. When those balances wear through, the sash drops without warning. In an older Craftsman home with original trim, that’s a safety issue and a hazard to fingers and window sills alike.
- Corroded or seized rollers on CWS 7400 sliding glass doors. Hard-water sprinkler spray and humidity eat at roller assemblies. The door starts dragging, then jumps the track entirely, and at that point the fix is new rollers, not silicone spray.
- Stucco flashing failures on CWS full-frame replacements. Older San Antonio homes with hard-coat stucco demand careful head flashing. When a prior install wasn’t flashed right, moisture gets behind the stucco and nobody sees it until the wood starts to rot or the CWS frame shows the rust staining at the corners.
CWS Service in San Antonio: What Local Conditions Mean for Your Equipment
Within the 78201 through 78210 corridor, any CWS replacement or full-frame job on a contributing structure typically requires a Certificate of Appropriateness from San Antonio’s Office of Historic Preservation. That’s a local approval layer that does not apply to most of Bexar County, and it changes how we approach every CWS window in King William, Monte Vista, Government Hill, and Lavaca. The city wants us to match the original wood fenestration pattern, which means sightlines, jamb depth, and muntin profiles all have to be documented before the first screw comes out. At the same time, the same neighborhoods sit on black-gumbo clay that racks door frames a quarter to three-eighths of an inch out of square within a few years. So a CWS unit that goes in perfectly plumb in March can bind by August, not because the install was wrong but because the ground beneath the slab moved. We quote trim-back and re-shimming as an expected return visit here, not as a warranty defect, because any San Antonio contractor who’s worked these streets knows the soil doesn’t stop moving. If you own CWS windows in these ZIP codes, you need a service provider who can satisfy the historic office and the physics of the earth at the same address. That’s the job.
CWS Models & Products We Service in San Antonio
We work on the CWS 190 Series Double Hung, the 340 Series Casement, the 7400 Sliding Glass Door, and the 1000 Impact Flanged Window. For structural or warranty-sensitive components like sashes, balances, and pivot bars, we order OEM CWS hardware and glass packs. When CWS has discontinued a roller assembly or a weatherstripping profile, we machine or source aftermarket equivalents that meet the original spec. We only recommend full replacement when the CWS frame is racked beyond three-eighths of an inch out of square or the original clad finish has compromised the structural joint. Most calls are a repair, and that’s the honest answer we’ll give you.
CWS Service Pricing in San Antonio
CWS window and door service in San Antonio runs from $125 to $450 for typical repairs like balance replacements, roller swaps, and seal replacements. Full frame replacement runs $700 to $2,000 per opening. Historic window restoration on pre-1950 sashes costs between $500 and $1,500 per unit, and energy-efficient upgrades sit in the $900 to $2,200 range per window. What drives cost the most is the Certificate of Appropriateness paperwork in historic districts and the amount of re-shimming the clay has forced on the frame. Call (888) 635-0804 for a free estimate and we’ll line-item the work so you see exactly what’s being done.
Serving San Antonio, TX - Our Local Coverage Area
We’re based in the San Antonio area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in San Antonio
Yes, in many cases. San Antonio’s historic district rules prefer restoration over replacement, and CWS sashes that are still square can be rebuilt with new balances, glazing, and weatherstripping to keep the original sightlines intact. Call (888) 635-0804 and we’ll tell you whether your unit qualifies for restoration or if the frame’s gone too far. Estimates are free.
That pattern is the black-gumbo clay under San Antonio expanding with spring moisture and contracting in the winter dry season. The slab moves, the CWS 7400 frame racks slightly, and the San Antonio Door Installation binds in August but rolls better in February. We re-shim the frame and reset the rollers to compensate, and in historic districts we check the same movement against the original jamb depth so the fix doesn’t create a Code violation. Call (888) 635-0804 to schedule a look.
The Office of Historic Preservation wants photos of the existing window from both inside and out, a measured drawing of the rough opening, manufacturer documentation for the proposed CWS unit, and a written description of how the new sightlines and jamb depth will match the original. If that sounds like a pile of paperwork, it is, and we do it every week for customers in 78204. We’ll prepare the packet with you and be present at the review if needed.
No. San Antonio is not in the Miami-Dade or Florida Building Code High Velocity Hurricane Zone, so CWS impact units sold here are typically rated for lower debris-impact standards than what coastal homes require. San Antonio sits on the Balcones Escarpment, and the risk profile is thermal extremes and occasional arctic intrusions, not Category 4 windborne missiles. We’ll quote you the correct CWS unit for this area, not a coastal overbuild.
Sometimes. If the CWS frame is square and the hinge and latch mortises are in good condition, we can often reuse operator hardware and match it with a new CWS 340 series sash. When the frame has been racked by clay movement beyond a manageable tolerance, we’ll tell you that before we start and quote a full-frame option. Call (888) 635-0804 for a free assessment.
H2 CWS Service in San Antonio: One Job That Shows What We Mean
In Monte Vista, a homeowner called because their CWS 190 double hungs wouldn’t stay up. Both balances had worn through. Our tech pulled the sashes on a 1930 Craftsman and found the original CWS jamb liners still square, but the weight-pocket screw holes were stripped from decades of seasonal clay movement. We re-tapped the holes to a heavier gauge and installed OEM constant-force balances. The windows now glide and lock with two fingers. This is why we don’t just swap parts: we find out where the part sits and what the ground and the heat have done to it. TruePane has been doing that since 2008 across San Antonio, and we’ll do it for your CWS windows.
Service Areas Near San Antonio
We serve the San Antonio metro and the communities that border it, including Parkway, Arden-Arcade, Ladera Heights, Commerce, Rosemont, and West Athens. If you’re in any of these areas and your CWS unit is failing, call us at (888) 635-0804 and we’ll put you on the schedule. We also provide CWS sales & service across the region, and you can read more about our San Antonio service area there. For comparison, we also operate CWS service in Dallas and CWS service in Austin, where the soil and the sun play by different rules.
Book Your CWS Service in San Antonio Today
Call (888) 635-0804 to schedule your free estimate. A live person answers, and we’ll walk you through what’s wrong, what it costs, and what we’ll do about it. We stand behind every repair and every replacement, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Antonio since 2008 through years of glass and glazing craft.