Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHow Much Does Custom Window & Door Order Cost in Columbus?
Custom window and door orders in Columbus, OH typically run between $800 and $6,500 per unit, with most residential projects landing in the $1,200 to $3,800 range once you factor in the unit itself, professional measurement, and installation. That range is wide because “custom” covers everything from a non-standard double-hung in Clintonville to a floor-to-ceiling fixed picture window in New Albany – the variables are real, and so are the price differences between them. What follows is a plain-language breakdown of what Columbus homeowners are actually paying in 2026, and what moves the number up or down.
Custom Window & Door Order Cost Breakdown (2026)
Custom windows and doors are priced differently than stock units. You’re paying for fabrication to exact dimensions, not pulling something off a shelf. The table below reflects what we see in the Columbus market – Westerville ranch expansions, Victorian-era Clintonville homes with non-standard openings, and new construction in Dublin where architects specify dimensions no standard catalog carries.
| Product Type | Unit Cost Range | Installation Range | Typical Total (Per Unit) |
|---|---|---|---|
| Custom double-hung window (wood or fiberglass) | $450 – $1,400 | $200 – $450 | $650 – $1,850 |
| Custom casement or awning window | $550 – $1,600 | $220 – $500 | $770 – $2,100 |
| Custom fixed/picture window (large format) | $700 – $2,800 | $280 – $650 | $980 – $3,450 |
| Custom bay or bow window | $1,800 – $5,200 | $500 – $1,200 | $2,300 – $6,400 |
| Custom entry door (fiberglass or steel) | $900 – $3,500 | $300 – $700 | $1,200 – $4,200 |
| Custom patio / sliding door (multi-panel) | $1,400 – $5,000 | $400 – $950 | $1,800 – $5,950 |
| Custom wood-clad door unit (Marvin, Andersen) | $2,200 – $6,000 | $500 – $1,100 | $2,700 – $7,100 |
These ranges reflect Columbus-area labor and material costs as of 2026. Lead times on custom fabrication currently run 4 to 10 weeks depending on the manufacturer line – Andersen and Pella tend toward the shorter end; Marvin’s more specialized wood-clad units and some CGI impact lines can push toward the longer end. If you’re planning around a renovation schedule in Upper Arlington or a move-in date in Gahanna, that lead time is worth building into your timeline early.
Installation cost is not a flat fee. A flush new-construction opening in a ranch home in Reynoldsburg installs faster than a water-damaged rough opening in a 1920s brick colonial in Bexley. Framing repairs, rot remediation, or custom trim work all add to the labor side – and any contractor who quotes installation without seeing the opening is guessing.
What Affects Custom Window & Door Order Pricing in Columbus
- Glass specification and glazing package: The glass itself is often the largest single cost variable. Standard double-pane low-E glass is priced differently from triple-pane, laminated safety glass, or obscure/decorative patterns. Columbus winters regularly push overnight lows below 10 degrees Fahrenheit, and summer humidity off the Scioto basin is real – the glazing package you choose affects both comfort and long-term energy costs. Upgrading from double-pane to triple-pane on a large custom casement can add $150 to $400 per unit.
- Frame material: Vinyl frames are the most economical. Fiberglass runs higher – typically 20 to 40 percent more than comparable vinyl – but holds dimension better through Ohio’s temperature swings, which is why we see more fiberglass specified in homes along Olentangy River Road where oak tree root systems shift foundations over decades. Wood and wood-clad frames (Marvin, Andersen A-Series) sit at the top of the range and carry higher maintenance expectations.
- Unit size and shape: Every dimension outside a standard catalog size requires custom fabrication. A round-top or arched window – common in older Clintonville and Short North homes – costs more than a rectangle of the same glass area, both because of the frame complexity and because installation requires more time and precision.
- Manufacturer line selected: We install more than a dozen manufacturer lines, including Andersen, Pella, Marvin, Milgard, Jeld-Wen, PGT, CGI, and ES Windows. The price difference between a comparable Jeld-Wen unit and a Marvin Signature unit in the same opening can exceed $1,000. We quote manufacturer lines side by side on paper so you see exactly what each dollar buys – no steering, no mystery.
- Existing opening condition: This is the one Columbus homeowners most often underestimate. A home in Worthington built in the 1960s may have window openings that have shifted, settled, or accumulated moisture damage behind the casing. If the rough opening needs framing work or rot repair before the new unit goes in, that cost belongs on the estimate – and any honest contractor puts it there upfront rather than surfacing it mid-job.
- Finish, hardware, and grille configuration: Interior and exterior finish colors, hardware packages, and decorative grille patterns all carry per-unit adders. A standard white vinyl unit with no grilles is priced differently from a bronze-exterior Pella with interior wood stain and simulated divided lites. These choices are worth making deliberately – they affect both cost and resale appearance.
How to Save on Custom Window & Door Order
Custom doesn’t mean negotiating the price – fabrication costs are what they are. But there are real ways Columbus homeowners avoid overpaying, and most of them come down to decisions made before the order is placed, not after.
Bundle units in a single order. Custom fabrication involves setup costs that are spread across the order. Ordering three non-standard windows at once is almost always more cost-efficient per unit than ordering them in three separate visits. If your home in Powell has four windows with the same unusual dimension, order all four together. The savings on fabrication setup can be meaningful.
Get the measurement right the first time. A mis-measured custom unit is a unit you pay to fabricate twice. This is not a place to save money by measuring yourself. Our technicians measure every opening twice before an order is placed – it’s a small investment of time that eliminates an expensive mistake. We’ve seen other contractors submit orders on sight-measured dimensions and then blame the manufacturer when the unit doesn’t fit. The fault is almost always in the measurement.
Choose the frame material for your actual conditions. Vinyl is less expensive upfront. If your home in Hilliard gets direct western sun exposure on the windows in question, fiberglass or a wood-clad composite will hold its shape better over time. Buying vinyl for a western exposure to save $300 upfront and replacing it in twelve years costs more than the fiberglass would have. Pick material for the specific opening, not for the invoice line.
Use Columbus’s energy efficiency incentives where they apply. Ohio utility providers periodically offer rebate programs for certified energy-efficient window and door replacements. The specific terms change, so ask your utility provider directly. Some Andersen, Pella, and Marvin units qualify for federal energy tax credits under current law – ask us to identify which units in your quote meet the current threshold. That credit doesn’t appear automatically; it requires the right product specification.
Ask about our standing offers before your estimate closes. We offer a free written repair estimate, a maintenance check, and a permanent 5 percent discount for seniors and veterans. If you qualify, it belongs on the estimate. We don’t wait to be asked – but if a salesperson from another company forgot to mention it, that’s worth knowing.
For a free estimate with no pressure and no surprise line items, call us at (888) 635-0804. A live person answers every call. We’ll schedule a measurement visit, bring quotes from the relevant manufacturer lines side by side on paper, and give you a number you can plan around.
FAQs – Custom Window & Door Order Cost in Columbus
How much does a custom window cost in Columbus, OH in 2026?
A custom window in Columbus typically costs $650 to $3,450 installed, depending on size, glass package, and frame material. Standard double-hung custom units run lower – often $700 to $1,200 installed – while large fixed windows or bay configurations can reach $3,000 to $6,400. Call (888) 635-0804 for a free estimate; we measure the opening and quote specific manufacturer lines on paper so the number is real, not approximate.
Is a custom window or door more expensive than a standard unit?
Yes, typically by 20 to 60 percent more per unit than a comparable stock size from the same manufacturer. Custom fabrication carries a setup cost that stock units don’t, and lead times are longer – 4 to 10 weeks versus days for in-stock units. The tradeoff is a unit that fits the opening correctly, carries the right glass specification for the exposure, and doesn’t require shimming or filler trim to compensate for a close-but-not-right stock size.
How long does a custom window or door order take in Columbus?
Fabrication lead times currently run 4 to 10 weeks from confirmed order to delivery, depending on the manufacturer line and product complexity. Andersen and Pella tend toward the shorter end of that range; Marvin Signature and certain impact-rated CGI lines can run longer. Installation itself typically takes one day once the unit arrives. If you’re working around a renovation timeline or a sale closing date, that 4-to-10-week window is the number to build your schedule around.
Can I get a same-day or next-day estimate on a custom order?
We can schedule a measurement visit quickly – often within one to three business days for most Columbus neighborhoods. The estimate itself requires us to see the opening, take precise measurements, and identify any opening-condition issues before quoting. We do not quote custom work over the phone based on homeowner-reported dimensions; the risk of a fabrication error on a mis-measured opening is too high to take a shortcut there. Call (888) 635-0804 and we’ll get you on the schedule.
Does TruePane offer a warranty on custom window and door installs?
Every custom window and door job is covered by two things: the manufacturer’s product warranty – both warranty layers registered in writing, durations stated, before the truck leaves the driveway – and our Done Right Promise on the installation itself. If something isn’t right in the first 90 days, we come back and make it right. No paperwork, no arguing, no fine print. That’s The Keystone Standard, and it applies to every job we do in Columbus regardless of project size.
Key Takeaways
- Custom windows in Columbus run $650 to $6,400 installed depending on type, size, and glass specification.
- Frame material, glass package, and opening condition are the three factors that most often move the final number.
- Ordering multiple units in a single fabrication run saves money compared to ordering them separately.
- Lead times on custom orders are 4 to 10 weeks – plan your project timeline around that number.
- Every TruePane install includes both manufacturer warranty layers registered in writing and a Done Right Promise on workmanship.
- Seniors and veterans receive a permanent 5 percent discount. Ask before the estimate closes.
If you’re ready to get a real number on your Custom Window & Door Order in Columbus, or just want to understand your options before committing to anything, call (888) 635-0804. Someone picks up the phone – day or night. We’ll measure the opening, quote the lines that fit your project, and leave you with a written estimate you can sit with. No pressure, no expiring-today urgency. The work either earns your confidence or it doesn’t, and we’d rather you decide that with accurate information in front of you.
You can also visit our home to learn more about the full range of services TruePane provides across central Ohio.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Columbus, OH since 2008. Pricing reflects the Columbus market as of 2026. TruePane Windows & Doors offers free estimates – call (888) 635-0804.
What Our Customers Say
"Two entry doors. Showed up when they said, second day was a half day like they said, and the painter they recommended confirmed the frames were dead plumb. The financing was explained in actual dollars, not a brochure."
- Janet R."Impact windows on the whole house. They handled the permit, the inspection, and gave me a folder with every approval number for the insurance company. My windstorm premium dropped enough to notice."
- Bill T."Whole-house window replacement at 71 years old is not something you want to do twice. Dale walked the house himself for the quote. Crew was the same three men all four days, and the foreman knew every window by room."
- Pat and Ray L.