Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Agoura
Custom window and door work in Agoura is not a stock-size job. It’s a code job, a wind-loading job, and usually a fire-zone job. TruePane measures, specs, and installs custom windows and doors that meet Very High Fire Hazard Severity Zone requirements while actually fitting the opening. If you’re pricing a replacement or a post-Woolsey rebuild, call (888) 635-0804 and we’ll walk the project with you before you sign anything.
Why TruePane Windows & Doors Is Agoura’s Preferred Custom Windows & Doors Company
We’ve worked enough homes along Kanan Road, Chesebro Road, and the streets off Thousand Oaks Boulevard to know what Agoura’s housing stock actually looks like behind the stucco. 1970s and 1980s tract homes with original aluminum frames. Post-2018 rebuilds with non-standard openings. The occasional 1990s custom that’s held up better than expected. None of it surprises us anymore.
Our Custom Windows & Doors team has pulled permits through the Agoura building department and through L.A. County for the unincorporated Las Virgenes corridor. We know which elevations get flagged for VHFHSZ glazing upgrades and which framing details the inspectors will actually look at. That’s the difference between a quote that holds and one that changes the week before install.
Dale Kessler runs every job to the same standard he’s kept on his whiteboard since day one: if the pane is not true, the job is not done. We register both manufacturer warranty layers in writing before the truck leaves your driveway, and the Done Right Promise covers the workmanship. No arguing, no fine print that covers neither.
Our Custom Windows & Doors Services in Agoura
Custom Shape Windows
Arches, circles, trapezoids, and angled units are common in Agoura’s 1980s and 1990s builds, where a builder put in a half-round transom or an octagon accent and the homeowner has been living with a fogged seal ever since. We measure the actual rough opening, not the old glass size, and order a tempered unit cut to the curve. VHFHSZ compliance gets checked on the fire-exposed elevations before we order anything.
Oversized Glass Panels
Floor-to-ceiling glass and wide sliding panels look right in Agoura homes that face the hills, but Santa Ana winds punish them harder than anything else we install. Oversized panels need thicker glass, heavier frames, and reinforcement at the header. We also confirm the assembly meets current fire-zone glazing rules on the elevations that face open space. A standard dual-pane panel that passed code in 1985 will not pass today, and that’s not something we’ll fudge to save a few hundred dollars.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are popular with homeowners in the Old Agoura and Morrison Ranch areas who want the look of individual panes without losing the insulating performance of a single large unit. We order SDL bars to match the profile on the rest of the house, including custom widths for homes where the original windows had a non-standard muntin size. The grilles get installed inside the sealed unit so they don’t rattle in the wind, which matters more than you’d think on a west-facing wall in Agoura.
Commercial Storefront Glazing
Agoura’s retail storefronts along Thousand Oaks Boulevard and Kanan Road have their own set of problems, mostly door closers that fail, aluminum storefront frames that have pulled loose from years of wind, and tempered glass that shatters when a door slams on a hot afternoon. We handle storefront glass replacement on a schedule that respects that you’ve got tenants walking in and out. Same-day board-up is available when a panel fails.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Agoura
We’re an authorized installer for more than a dozen manufacturer lines, and for Agoura jobs we regularly quote, CGI, and ES Windows side by side on paper so you can see the price difference in writing. CGI and CWS impact-rated units come up often in the post-Woolsey rebuild market because the fire-zone glazing requirements overlap with impact standards in several of Agoura’s elevations. We stock common weatherstripping, hardware, and insulated glass unit replacements for local homes so we’re not waiting on a freight shipment every time a seal fails.
Common Custom Windows & Doors Problems We See in Agoura Homes
- Failed VHFHSZ inspection on older dual-pane units. A homeowner files for a re-roof or an addition permit and the reviewer flags that the fire-exposed elevations still have standard dual-pane glass. The windows then have to be upgraded to tempered or multi-pane fire-resistant assemblies before the other permit clears.
- Santa Ana wind damage to south- and west-facing walls. Sustained gusts through the mountain passes warp early-aluminum frames, pull jambs out of square, and cause sash misalignment that shows up as a window that won’t close properly or a seal that’s failed along one edge.
- Rotted or undersized headers behind original 1970s frames. When we open up a wall to replace a window that’s been leaking for years, we sometimes find the header was undersized to begin with. That triggers a structural upgrade and usually a glazing change to current Agoura code, which is a conversation we have before the wall is opened, not after.
- Fogged insulated glass units with no VHFHSZ-rated replacement available. A homeowner wants to fix a fogged seal and assumes it’s a simple glass swap, but the replacement unit has to meet current fire-zone glazing rules on that elevation. That changes the spec, and sometimes the cost, and we explain that before ordering anything.
Pricing for Custom Windows & Doors in Agoura, CA
A custom shape window in Agoura, say an arch or a radius unit with tempered glass, typically runs $1,400 to $3,800 installed depending on size and whether it’s on a fire-exposed elevation. Oversized glass panels start around $2,800 and can reach $9,000 or more for a wide sliding door with impact-rated glazing. Architectural grilles and SDLs add roughly $180 to $450 per window depending on the pattern and whether they’re internal or external bars. A full commercial storefront glass replacement on a typical Agoura retail bay runs $2,500 to $6,500. These are honest numbers based on what we’ve quoted in Agoura, not national averages. Call (888) 635-0804 for a written line-item quote and we’ll put the numbers in front of you before anyone touches a wall.
What changes the price more than anything in Agoura is the VHFHSZ glazing requirement. A standard dual-pane unit on an interior-facing wall might cost $800, while the same size window on a fire-exposed elevation runs 30 to 60 percent more because of the tempered or fire-resistant glass requirement. That’s not an upcharge. That’s code.
We Also Serve Cities Near Agoura
TruePane handles custom window and door work throughout the surrounding area, including Parkway, Arden-Arcade, Ladera Heights, and Commerce. If you’re just outside our Agoura service area, call (888) 635-0804 and we’ll confirm whether we can get a crew to you on the same schedule.
Serving Agoura, CA - Our Local Coverage Area
We’re based in the Agoura area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Agoura
Because Agoura Hills sits entirely within a Very High Fire Hazard Severity Zone, and the current building code applies to the structure as it stands today, not as it was when it was built. Any window or door replacement on a fire-exposed elevation must now use tempered or fire-rated glazing and fire-rated door assemblies. A 40-year-old house with original windows is exactly the property that gets flagged. We handle the spec and the paperwork so the permit doesn’t stall. Call (888) 635-0804 if you want us to look at your specific elevation before you file.
Yes. Rebuilt homes in Agoura often have openings that were framed to match the original footprint, which means non-standard window sizes that no stock unit will fit. We measure the actual rough opening, order a custom unit cut to spec, and confirm the glazing meets VHFHSZ requirements on the elevations that face open space. The compliance gets signed off before siding goes back on. Call (888) 635-0804 and we’ll walk the property with you.
It depends on the age and condition of the frame. If the frame is sound and the unit can be re-glazed, we can often replace just the insulated glass unit rather than the entire window. But if the frame has pulled out of square from Santa Ana wind loading, or if the elevation now requires VHFHSZ-compliant glazing, a full frame replacement may be the only code-compliant path. We’ll tell you which one applies to your opening and quote it in writing. Call (888) 635-0804 for a free estimate.
We stop work on that opening, show you what we found, and price the repair in writing before we touch it. In Agoura’s 1970s tract stock, undersized headers and rotted sills are common enough that we factor an allowance into the original contract. If the repair is within the allowance, we proceed. If it’s beyond it, you approve the change before we spend a dollar. No surprises on the final bill.
Yes. We work regularly in the unincorporated Las Virgenes corridor and pull permits through L.A. County for those properties. The code requirements are the same VHFHSZ standards that apply to incorporated Agoura Hills, but the permitting path is different, and we know which forms and reviews to expect. Call (888) 635-0804 and we’ll confirm we serve your exact street.
If you’re replacing windows or doors in Agoura, the job is more than glass and hardware. It’s fire-zone compliance, wind-loading resistance, and a contractor who knows the difference between a stock unit and one that will actually pass inspection here. TruePane has been doing this work long enough to know the difference. Call (888) 635-0804 to schedule your free estimate, and we’ll walk the project with you before you commit to anything. A square deal, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Agoura and the surrounding Conejo Valley communities.