Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Auburn
Custom window and door work in Auburn, CA runs $2,800 to $18,000+ depending on opening count, glazing spec, and site access. That’s a wide band because Auburn is not one kind of house: a standard slider replacement on a 1970s ranch off Bell Road is a different job than custom WUI-rated picture windows on a canyon-rim lot above the American River. We measure twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. Call (888) 635-0804 to schedule a free estimate.
Dispatch and scheduling for our Auburn work is coordinated from our Sacramento office, but the crews on your job live and work in the foothills. They know Placer County building codes, CAL FIRE WUI requirements, and the way Old Town Auburn’s Gold Rush-era structures resist a stock-frame install.
Why TruePane Windows & Doors Is Auburn’s Preferred Custom Windows & Doors Company
We are not a franchise playbook. TruePane was founded in 2008 by second-generation glazier Dale Kessler, and the company’s operating rule has been the same from day one: if the pane is not true, the job is not done. That matters when you live in a hillside house along the Highway 49 corridor where door frames routinely sit a half-inch out of square.
Auburn homeowners tell us the same thing: they called another window company, the bid came in vague, and the follow-up call went to voicemail. Our Custom Windows & Doors team gives you a written line-item quote, not a number scratched on a clipboard. A live person answers our phone 24 hours a day, 7 days a week. Not a voicemail tree. Not a callback form.
Every tech who steps onto an Auburn property is background-checked, uniformed, and trained to work the way they would in their own mother’s house. That means shoe covers inside, plywood and drop cloths protecting shared walls on tight Old Town lots, and a broom and magnet sweep before we pack up.
Dale’s standard is known as The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated plainly, before the truck leaves the driveway. And every job carries our Done Right Promise. If something is not right, we make it right. No paperwork fights. No arguing.
Our Custom Windows & Doors Services in Auburn
Most of our Auburn work falls into four areas. Each one changes shape depending on whether you are in a Victorian in Old Town, a 1960s ranch in the 95602 flatlands, or a custom hillside build above Auburn Ravine.
Custom Shape Windows
Arched transoms, round-top openings, angled knee-wall glass, trapezoids that follow a gable line. Custom shape windows in Auburn often mean working with an original rough opening that has not been square since the last Gold Rush-era foundation settled. We field-measure every opening twice, order the exact radius or angle, and shim and set the unit so the sightlines stay true. If the opening has moved, we tell you before the glass is cut, not after.
Commercial Storefront Glazing
Old Town Auburn storefronts along Lincoln Way and Commercial Street typically carry original aluminum framing with single-pane glass that sweats in winter and bleeds heat in a 100°F July. We replace storefront systems with thermally broken frames and low-E glazing rated for the foothill temperature swing. We work around your business hours, coordinate with the city’s historic review requirements where they apply, and keep the sidewalk clear and safe.
Curtain Wall Systems
A curtain wall is a non-load-bearing glass facade that hangs from the structure. Most Auburn curtain wall calls come from commercial and mixed-use buildings, but hillside custom homes increasingly use them for canyon-facing great rooms where a solid wall would waste the view. Curtain wall spec in Auburn has to account for WUI ember-resistance requirements, wind load on exposed ridge lines, and seasonal thermal expansion across a 40°F nightly swing. We design to all three.
Architectural Grilles & SDLs
Grilles and Simulated Divided Lites (SDLs) are how you keep a historic look without a true divided wood sash that leaks air. We install aluminum SDL profiles in energy-efficient insulated glass units, matching the muntin profile and spacing to the original window so the facade reads period-correct. For Old Town Auburn Victorians, this is frequently the difference between a window that looks right and one that screams replacement.
Oversized Glass Panels
Oversized glass in Auburn is a logistics job before it is a glazing job. A 96-by-120-inch panel has to be ordered, delivered, and staged on a lot that may have no driveway and a 15-foot elevation drop from the road to the house. We plan crane or lift access, confirm WUI glazing ratings with the manufacturer, and do a site walk before the quote so the price you get is the price you pay.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Auburn
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Auburn’s WUI and hillside work, we specify a lot of PGT and CGI impact-rated and fire-resistive units, with ES Windows as a strong option for oversized, view-maximizing custom panels where the budget allows a premium line. We stock common weatherstripping, balance cartridges, and lock hardware for the brands we install, so warranty service does not wait on a ground shipment from a distribution center in Texas.
Common Custom Windows & Doors Problems We See in Auburn Homes
- Fogged insulated glass from foothill freeze-thaw cycles. Auburn’s winter nights drop below freezing and summer highs regularly crack 100°F. That 40°F daily swing is what kills dual-pane seals, allowing argon fill to escape and U-factor to climb. We replace failed IGUs with properly spec’d low-E glass, not the cheapest unit that fits.
- Out-of-square hillside door frames. Decomposed-granite soils along the Highway 49 corridor shift on steep grades, and door rough openings drift. A half-inch out of square is routine. We custom-shim and extend jambs so the door slab hangs true and latches for good, rather than force-fitting a stock pre-hung unit into a parallelogram and blaming the foundation.
- Non-compliant glazing triggering insurance trouble. Auburn sits in a CAL FIRE High Fire Hazard Severity Zone. Windows and doors on most foothill lots must meet WUI fire-resistance standards. We have measured multiple Auburn homes where a previous contractor installed non-rated glazing, and the homeowner found out when their insurer sent a non-renewal notice. We fix those openings with WUI-compliant units and document everything for the insurance file.
- Historic single-pane sashes with dead glazing putty. Old Town Auburn’s Victorian and Gold Rush-era homes often retain original wood sashes with putty so dried it crumbles on contact. Replacing with stock vinyl ruins the building’s proportions. We do historic-sensitive custom work: matched muntin profiles, true-divided-lite replacements where appropriate, or SDL-upgraded insulated units that keep the look and cut the energy bill.
Pricing for Custom Windows & Doors in Auburn, CA
Here is what we see in Auburn’s market right now. A single custom WUI-rated replacement window typically runs $1,200 to $3,400 installed. A full custom door replacement, including a new pre-hung slab, hardware, and WUI-compliant threshold, runs $2,500 to $6,800. Architectural grilles and SDLs add $200 to $600 per window depending on profile and grid pattern. Oversized custom glass panels start around $4,000 and go up fast on hillside lots where lift access is tight. The biggest Auburn-specific cost driver is site access: a tight Old Town lot with no staging area and a shared party wall adds planning time, not hidden fees. We put it in the written quote. Call (888) 635-0804 for an exact price. Estimates are free.
Working on a Tight Auburn Lot: How We Keep the Pain Down
Many Auburn homes, especially in Old Town and the hillside subdivisions off Lincoln Way and Auburn-Folsom Road, have no usable driveway, no side access, and a neighbor’s wall eight feet from the opening we are replacing. That changes how a custom window and door job gets staged. We walk every site before quoting. We figure out where the truck parks. We figure out whether we need a day-rate street parking permit from the city. We figure out what the noise ordinance allows and what time we can legally start the saw.
We recently replaced six original double-hung wood sashes in an Old Town Auburn Victorian, where deteriorated glazing putty and painted-shut sashes meant custom millwork to preserve the historic sightlines. Our crew staged in the narrow alley behind the building, protected the shared party wall with plywood and drop cloths, and coordinated a day-rate parking permit for our box truck, all while keeping noise below the city’s decibel limits during the 7 AM start window. The neighbor on the other side of the party wall signed off on the job without a complaint. That is not luck. That is how we run a close-quarters site.
If your lot has no driveway, expect the quote to account for hand-carrying glass up a slope or stair set. We will tell you what that costs, in writing, before you sign. No surprises on the bill.
We Also Serve Cities Near Auburn
Auburn is our foothill anchor, and we run regular crews to the surrounding communities. Homeowners in Lincoln, Loomis, Rocklin, and Grass Valley call us for the same WUI spec work, the same historic-sensitive approach, and the same Done Right Promise.
Serving Auburn, CA - Our Local Coverage Area
We’re based in the Auburn area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Auburn
Yes. Most window and door replacements in Auburn require a building permit, and because much of the city sits in a CAL FIRE High Fire Hazard Severity Zone, the permit review includes WUI fire-resistance verification: tempered or fire-rated glazing, ember-resistant frame materials, and compliant weatherstripping. We pull the permits, schedule the inspections, and hand you the passed inspection record so your insurance file stays clean. Call (888) 635-0804 and we will check your specific parcel before you spend a dollar.
Yes, and this is where SDLs and custom grilles earn their cost. We replace the original single-pane wood sashes with insulated low-E glass units, then apply SDL profiles milled to match the original muntin dimensions and spacing. From the sidewalk, the window reads period-correct. On the energy bill, it performs like a modern dual-pane. We have done this on Victorians and Gold Rush-era buildings throughout Old Town, including units with arched transoms that needed custom-radius glass.
We walk the site first, before quoting, and figure out truck parking, material staging, and debris removal. On Old Town jobs we coordinate day-rate street parking permits with the city. On hillside lots we plan lift or hand-carry access and price it into the bid. We protect shared walls with plywood and drop cloths and keep noise inside the city’s window. You will know exactly how we plan to work before the contract is signed.
In most cases, yes. We custom-shim the rough opening, extend the jambs, and hang the slab so it swings true and latches fully. If the frame is so far out that shimming would look wrong, we will tell you and give you a straight answer on the repair scope before you spend on a new door. A stock pre-hung unit jammed into an out-of-square opening is exactly how doors end up binding every July and swinging open on their own in January.
They can be the difference between renewal and non-renewal. Insurers writing policies in Placer County foothill communities are increasingly requiring documented fire-hardening measures, and WUI-rated windows and doors are among the items on the list. We install to the current WUI standard, document the glazing and frame ratings, and give you the paperwork to file with your insurer. We cannot guarantee your carrier’s decision, but we can make sure the window and door portion of your hardening plan is done right and provably compliant.
Contact TruePane Windows & Doors in Auburn
If you live in Auburn and you are ready to stop fighting fogged glass, a door that binds, or an insurance notice you do not like, call us. We will walk your property, measure every opening twice, and hand you a written quote with line items you can read. (888) 635-0804. We stand behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving the Auburn foothills with custom window and door craft since 2008.