Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Lomita
Custom window and door work in Lomita runs on a different clock than most of the South Bay. The housing stock here was built between 1945 and 1970, which means the original aluminum fenestration is now 55 to 70 years old and fighting a losing battle against salt air rolling in from the Port of Los Angeles. We get calls from homeowners all over 90717 who have spent money on sash retrofits or roller replacements that failed within two years. The honest answer, in most Lomita homes, is full-frame replacement with sealed, properly flashed units that can stand up to harbor-driven corrosion. Our Custom Windows & Doors team has been doing exactly that for homes across Lomita, from the railroad-side streets near 250th to the larger parcels up against the 110. Call (888) 635-0804 and a live person answers. That has been the rule here since day one.
Why TruePane Windows & Doors Is Lomita’s Preferred Custom Windows & Doors Company
Most window companies work Lomita from a distance. We work it like we live here, because a good number of our crew members do. That changes how a quote gets built. A crew that knows Lomita knows that a 1961 ranch near Narbonne Avenue will probably have non-standard rough openings because the framing lumber dried and shifted for six decades before anyone thought to measure for replacement windows. We do not rely on stock sizes and hope for the best. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway.
Dale Kessler started TruePane in 2008 after years of watching out-of-true installs and voided warranties leave homeowners holding the bag. The rule on his whiteboard, “if the pane is not true, the job is not done,” is the same rule our technicians work by in Lomita now. Every job carries the Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, durations stated, and the workmanship is guaranteed for 90 days with no paperwork fights. We plan to be in Lomita in thirty years. That changes how we do every install today.
Our Custom Windows & Doors Services in Lomita
Lomita’s 1.9 square miles are dense with small ranch-style and California bungalow homes, plus a surprising number of larger parcels with detached garages, workshops, and newer ADUs. Custom work is not the exception here. It is usually the only way to do the job right. These are the services our Lomita customers ask for most often.
Custom Shape Windows
Lomita’s post-war tract homes often have awkward architectural details: angled gable ends, half-round accent windows over front entries, narrow flanking windows beside brick chimneys. Big-box replacement programs do not touch those openings. We do. Our shop cuts and installs radius, arched, octagonal, and trapezoidal frames built to the exact rough opening. On a 1960 bungalow east of Narbonne, we recently built a three-piece picture window assembly with a radius transom to match the original character without keeping the original single-pane glass.
Oversized Glass Panels
Many Lomita homes on larger lots have detached garages or ADUs with rough openings that were never meant for stock windows. When someone adds a home office or a workshop out back, they usually want floor-to-ceiling glass or a broad sliding wall. Those are oversized panels by definition, often requiring tempered or laminated glazing, custom header reinforcement, and a crane-assisted set for anything over 1,200 pounds. We scope the framing, the glazing spec, and the lift before we quote. No surprises on the bill. That is a square deal.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, are the standard way to keep a 1950s ranch looking like a 1950s ranch while upgrading to modern insulated glass. We build true divided lite patterns for homes that want authentic muntin bars, and SDLs for homeowners who want the look without the thermal penalty. The trick in Lomita is material selection. Salt-laden air will pit raw aluminum grilles inside a decade. We spec painted or factory-finished grilles with sealed joints and walk the homeowner through the maintenance difference before they sign.
Commercial Storefront Glazing & Curtain Wall Systems
Lomita has a working commercial strip along Pacific Coast Highway and a cluster of older storefronts near the railroad corridor on 250th Street. Storefront glass in this part of town takes the same salt-and-soot beating the houses do, plus the daily grime of diesel traffic. We install and service aluminum storefront systems, doors, and curtain wall for small commercial buildings and mixed-use properties. For a storefront on PCH near the 110, we recently replaced a failed curtain wall unit with a thermally broken system rated for the coastal exposure. The owner had spent two winters chasing leaks. Full replacement ended the chase.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Lomita
We install and service more than a dozen manufacturer lines, and we quote them side by side so the homeowner sees exactly what they are buying. Around Lomita, the most common requests we hear are for Milgard, PGT, and CGI. Milgard Tuscany vinyl frames hold up well against the harbor’s salt air and are a good fit for 1950s ranches. PGT and CGI make impact-rated glass that more Lomita homeowners are asking about as coastal storm patterns shift. We stock common replacement hardware and parts for these lines locally, which means a warranty follow-up or a tune-up does not wait on a freight truck from out of state. If it is a brand we do not carry, we will tell you before we quote, not after.
Common Custom Windows & Doors Problems We See in Lomita Homes
- Pitted and corroded aluminum frames. Salt-air oxidation eats original 1950s and 1960s aluminum frames from the inside out. Within 10 to 15 years of exposure, the frames swell at the jambs and sashes bind. You can lubricate them, but the metal is already compromised.
- Sliding door rollers destroyed by salt-and-soot grit. The marine layer off the Port of Los Angeles mixes moisture with diesel particulate and deposits a gritty paste inside window and door tracks. On original 1960s aluminum sliders, that paste seizes rollers within a few years of any repair. Full-frame replacement is almost always the right call over another roller swap.
- Fogged insulated glass from seal failure. The temperature swings that roll in from the harbor put pressure on the seals of insulated glass units. When a seal fails, the argon fill leaks out and the U-factor performance drops to near single-pane levels. You know it is happening when the glass fogs between the panes and does not clear.
- Non-standard rough openings on ADUs and detached structures. Lomita has a real stock of detached garages, workshops, and accessory dwelling units. Many were not framed for standard window sizes. We measure the actual opening, then build custom shapes or oversized panels that fit without butchering the framing.
Pricing for Custom Windows & Doors in Lomita, CA
A custom shape window in Lomita typically runs $600 to $1,400 per opening, depending on the glass spec and frame material. Oversized glass panels start around $1,800 and climb with size and lift complexity; a large sliding glass wall on a detached ADU can run $4,500 to $9,500 installed. Architectural grilles and SDLs add $150 to $400 per sash, and full-frame replacement for a standard 1950s ranch runs $14,000 to $28,000 for the whole house. The biggest variable in Lomita is not the window. It is what the framing looks like once the old aluminum comes out. Six decades of salt air leaves rot and shifting in the rough opening that stock replacements will not cover. We quote the full scope before we start, and we stand behind it. Call (888) 635-0804 for a free estimate, in writing, with both warranty layers registered.
Key Takeaways
- Homes in Lomita almost always need full-frame replacement, not sash retrofits, because of salt-air corrosion on original 1950s and 1960s aluminum.
- Custom shape windows run $600 to $1,400 per opening. Oversized glass panels start around $1,800 and go up based on lift and glazing requirements.
- A live person answers every call at (888) 635-0804, 24/7. No voicemail tree, no callback form.
- Every job carries the Done Right Promise and both manufacturer warranty layers registered in writing.
We Also Serve Cities Near Lomita
Our crews work throughout the South Bay and Harbor area, serving Lomita along with Lakewood, Torrance, Carson, and Rancho Palos Verdes. The same crew that quotes your job is the crew that installs it, and they know the difference between a Lomita tract ranch and a Palos Verdes hilltop custom. Dispatch is coordinated from our Los Angeles office, with local crews serving Lomita directly.
Serving Lomita, CA - Our Local Coverage Area
We’re based in the Lomita area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Lomita
Lomita sits just inland of the San Pedro and Wilmington harbor district, close enough that salt-laden marine air off the Port of Los Angeles reaches every block in 90717. Add diesel particulate fallout from port trucking and the 110, and you get a corrosive, gritty mixture that pits aluminum frames and clogs tracks. Torrance sits farther from the port and gets less of that salt-saturated air. A window that lasts 40 years in central Torrance may be pitted and binding within 15 years in Lomita. Call (888) 635-0804 for an exact assessment of your frames. Estimates are free.
Yes, with the right documentation. Oversized glass panels on an accessory dwelling unit usually require structural review because the header above the opening carries a heavier load than a stock window. We pull permits for the work and our installs are built to pass inspection the first time. Seismic bracing and tempered glazing requirements are part of the quote, not a change order later. Call (888) 635-0804 and we will walk you through the permit path for your specific parcel.
Window and door replacement rarely impinges on a septic leach field, but we flag it when the job involves a new addition, a widened opening, or a detached structure. On larger Lomita parcels that still run on septic, we verify the setback lines before we quote so the new rough opening does not send you into a county approval fight. It changes the scope and sometimes the placement. Our team handles the verification as part of the estimate. Call (888) 635-0804 for a free quote that includes setback review.
For homes on the west side of Lomita with direct exposure to the harbor’s marine layer and reflected coastal light, a low-E coating with a higher solar heat gain coefficient and good argon fill is usually the right balance. It keeps winter heat loss down without making the house a dark cave in summer. We quote low-E options side by side on paper so you see the U-factor and SHGC numbers before you choose. Call (888) 635-0804 and we will spec glass for your exact exposure.
In most Lomita homes, full replacement is the right call. The original aluminum tracks on a 1960s slider have been pitted by salt air and packed with salt-and-soot grit for decades. Replacing the rollers treats one symptom for a couple of years, and then the track seizes again. On a 1962 ranch near 247th Street and Western Avenue, we pulled out an original slider after finding the track so pitted the rollers had ground themselves to powder. Full replacement with a Milgard Tuscany vinyl frame and fusion-welded corners ended the problem permanently. Call (888) 635-0804 for an honest read on your door. We will not sell you a repair that will not last.
Ready to Fix Your Lomita Windows and Doors Right?
If the windows in your Lomita home are original, they are past due. The salt air is not going to stop, and neither is the soot. What stops is the guessing, once someone measures the actual openings and quotes the real scope. Call (888) 635-0804 for a free estimate. A live person answers, every time, day or night. We will send a background-checked, uniformed technician to measure every opening twice, quote the manufacturer lines you want side by side, and register both warranty layers before the truck leaves your driveway. Done right, in writing, with no arguing later. That is the whole deal.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Serving Lomita and the South Bay with straight measurements and glass that holds.