Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across San Jose
Custom window and door work in San Jose usually starts with a problem the homeowner can see: a slider that racks out of square, a wood jamb gone soft from tule fog, or a fogged double-pane that started as a single-pane aluminum original. In San Jose’s inland valley heat, those original aluminum sliders from the 1950s through 1970s leak conditioned air year round, and on a 100°F July afternoon the difference is not subtle. We install, replace, and service custom units across every San Jose ZIP code we cover, including 95101, and we measure every opening twice before we quote a single number. Call (888) 635-0804 and a live person answers, 24 hours a day, seven days a week. You will not get a voicemail tree or a callback form.
That matters in a city this size. San Jose stretches from Alviso’s former bay marshlands near Coyote Creek all the way into the foothills, and the homes in those neighborhoods were built differently, settled differently, and fail differently. A window that fits a 1960s Berryessa stucco ranch is not the same job as a our Window Replacement in San Jose custom unit for a 1930s Rose Garden Craftsman. We carry that local knowledge on every truck and into every estimate.
Why TruePane Windows & Doors Is San Jose’s Preferred Custom Windows & Doors Company
TruePane Windows & Doors was founded in 2008 by second-generation glazier Dale Kessler, and the company has served Bay Area communities since 2008 through its craft tradition. San Jose homeowners call us for San Jose Door Installation because the person on the phone understands the difference between a square opening and one that has settled over decades of groundwater pumping. We do not sell from a call center in another state. We schedule from our San Francisco Bay Area office and our crews work locally in San Jose neighborhoods every week.
Our Custom Windows & Doors team includes background-checked, uniformed technicians who work in your home the way they would work in their own mother’s. Every job is measured twice. We quote manufacturer lines side by side on paper so you see exactly what you are buying, and we register both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and it applies to every job in San Jose no exceptions.
San Jose homeowners have called us from Willow Glen, Naglee Park, Berryessa, and Alviso about the same recurring problems: original single-pane aluminum sliders, fogged insulated glass, doors that bind in July and leak in January fog. We know those houses. We know what happens when a cheap replacement window gets flashed wrong at the sill and the stucco-and-paper assembly starts to hold water. We fix that too.
Every job carries the Done Right Promise. If it is not done right, we make it right. No paperwork, no arguing, no fine print that covers neither. Dale’s founding rule still governs every install: if the pane is not true, the job is not done.
Our Custom Windows & Doors Services in San Jose
Custom Shape Windows
San Jose’s older enclaves, especially the 1920s-1940s Craftsman and Spanish Colonial homes in Naglee Park and the Rose Garden district, often have arched, radius, or angled openings that stock units simply cannot fill. We build custom shape windows to the exact rough opening, preserving the architectural character while upgrading the glass to a low-E insulated unit. In the valley’s summer heat, that upgrade cuts solar heat gain dramatically, and in winter tule fog it reduces condensation that leads to wood rot.
Architectural Grilles & SDLs
Simulated divided lites, or SDLs, give a replacement window the same sightlines as the original divided-light sash, which matters enormously in a Rose Garden Craftsman or a Naglee Park Spanish Colonial. We specify grille profiles that match the original muntin width, not a generic stick-on. For a 1950s Berryessa ranch, homeowners often want clean, unbroken glass instead, and we quote both readings on paper so the choice is informed, not assumed.
Oversized Glass Panels
The ranch homes built across East San Jose during the semiconductor boom often had wide living-room picture windows and deep patio sliders. Replacing those oversized openings with Impact Windows & Doors in San Jose modern low-E insulated glass requires careful load-bearing math and heavier framing than a standard 3×5 window. We handle the structural side in-house, and we do not cut corners on sill flashing, because a poorly flashed oversized unit in a stucco-and-paper assembly is a mold problem waiting for the first winter fog.
Commercial Storefront Glazing & Curtain Wall Systems
San Jose’s commercial buildings, from downtown storefronts to light-industrial offices near the airport, need glass that holds up to direct valley sun without turning the interior into an oven. We install and service commercial storefront glazing and curtain wall systems with the same craft standard we bring to residential work. Curtain wall in this climate demands low-SHGC coated glass, proper thermal breaks, and sealant joints that tolerate the valley’s wide temperature swings without failing at the mullion.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Jose
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For San Jose’s inland heat and winter fog, we typically show homeowners at least two viable lines side by side, so the price difference between a Milgard vinyl slider and a Viewlux service in San Jose PGT aluminum-clad unit is visible in writing, not buried in a verbal pitch. We service most major brands, and our trucks carry common hardware and replacement glass for Ply Gem, PGT, and CGI units. If we can repair it, we will tell you that before we sell you a replacement.
Common Custom Windows & Doors Problems We See in San Jose Homes
- Racked frames from land subsidence. Decades of groundwater over-pumping caused documented land subsidence across low-lying San Jose neighborhoods near Coyote Creek and the former bay marshlands of Alviso. In some blocks the ground sank several feet, and we regularly find door frames pulled out of square by over an inch, windows that will not close squarely, and jambs that bind at the corner. A new window or door cannot be properly installed or warranted until that opening is squared back up.
- Original single-pane aluminum sliders in 1950s-1970s stucco ranches. East San Jose, Berryessa, and Alviso still contain thousands of these, and they transmit heat directly into the house. On a 95-105°F valley afternoon, the glass itself becomes a radiant heater. Replacement with low-E dual-pane glass is not an upgrade here; it is a functional necessity, especially given California Title 24’s mandatory SHGC and U-factor thresholds.
- Winter tule fog driving moisture infiltration. The valley floor gets heavy tule fog in December and January, and that moisture works its way around old door thresholds and through wood jambs that were never built with tight vapor control. The result is seal failure in insulated glass units, rot in the frame, and mold in the wall cavity. Homes near Coyote Creek see this worse than the foothill neighborhoods.
- Poorly flashed replacements failing at the sill. The most common failure we see in San Jose is a previous replacement window that was not flashed properly at the sill plane. Splash-back against the stucco works behind the nailing fin, and within a few winters the paper is wet, the framing is soft, and the wall has mold. We strip out that work and re-flash the opening with tape and pan flashing before the new unit goes in.
Pricing for Custom Windows & Doors in San Jose, CA
A typical custom shape window in San Jose runs $900-$2,800 per unit installed, depending on opening size, frame material, glass package, and whether the rough opening needs reframing. Architectural grilles or SDLs typically add $60-$220 per sash. Oversized glass panels run $1,500-$4,500 installed, and commercial storefront glazing starts around $1,200 per opening. A racked Alviso slider that requires shimming and reframing will land between $2,000 and $5,500 depending on the header work. For a full stucco ranch, a whole-house replacement with mid-grade vinyl dual-pane units commonly lands between $18,000 and $45,000 in San Jose. We quote line by line, in writing, and the number we quote is the number you pay. Call (888) 635-0804 to schedule a free estimate, and we will bring manufacturer pricing on paper, side by side.
We Also Serve Cities Near San Jose
Our crews cover the entire Santa Clara Valley, including Milpitas, Santa Clara, Sunnyvale, and Campbell. If you own a 1960s ranch in Milpitas or a shopfront in downtown Campbell, the same Custom Windows & Doors in San Jose team measures, quotes, and installs your job. We schedule by opening, not by ZIP code, so every homeowner gets the same standard: measured twice, warranted in writing, done right.
Serving San Jose, CA - Our Local Coverage Area
We’re based in the San Jose area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in San Jose
East San Jose sits inland in the Santa Clara Valley and regularly hits 95-105°F in summer, which is 15-25°F hotter than coastal San Francisco. That sustained heat loads the aluminum frames and the single-pane glass with repeated thermal expansion cycles, and the heat transfer into the home is enormous. San Francisco’s coastal climate rarely pushes windows to the same thermal stress. In East San Jose, failing single-pane aluminum sliders are a comfort problem, a cooling-cost problem, and a Title 24 compliance problem all at once. Call (888) 635-0804 for an exact replacement quote; estimates are free.
We square the rough opening first, then install the new unit. In Alviso, we replaced a racked sliding glass door that had pulled its jamb out of square by over an inch. After shimming and reframing the rough opening, we set a Milgard fusion-welded vinyl slider with a low-E insulated glass unit and flashing tape at the sill, and the crew noted the old single-pane aluminum slider was the building’s last original opening. The frame must be square before any new window or door is set, or the warranty is worthless. Call (888) 635-0804 for an in-person assessment.
For most 1950s Berryessa stucco ranches, we recommend fusion-welded vinyl with a low-E insulated glass unit. Vinyl handles the valley’s thermal swing without warping, and modern multi-chamber extrusions meet Title 24 SHGC and U-factor thresholds without the premium cost of aluminum-clad wood. For homeowners who want a wider stile or a darker exterior, we quote PGT or Milgard aluminum lines side by side. The right answer is the one you can read on paper. Call (888) 635-0804 for a line-item comparison.
Yes. We build replacement units with true divided lites or SDLs that match the original muntin profile, and we can preserve original interior trim where the framing is sound. The exterior can be wood or aluminum-clad wood depending on your maintenance preference. In the Rose Garden district, these 1920s-1930s homes need historically sensitive replacement approaches, and we will not put a chunky vinyl sash in a century-old Craftsman opening unless you specifically ask for it. Call (888) 635-0804 for a free measurement and material options.
If the fog is between the two panes of glass, the seal has failed and the insulated glass unit needs replacement. If the fog wipes off the interior surface, it is condensation, and in San Jose it usually means the indoor humidity is too high relative to the outside temperature during winter tule fog season. Seal failure is not repairable on site; the glass unit or entire sash gets replaced. We assess it in person and give you the fix on the spot. Call (888) 635-0804 to schedule a look; the visit is free.
Call TruePane Windows & Doors in San Jose
If you live in San Jose and your windows or doors are not closing square, fogged, leaking in winter fog, or just working hard against the valley heat, call us. A live person answers every call at (888) 635-0804, 24 hours a day, seven days a week. We will schedule a free estimate, measure every opening twice, and put the numbers on paper in writing. The Keystone Standard applies: both warranty layers registered before we leave, and the Done Right Promise backs the work. If the pane is not true, the job is not done. That is the standard we bring to every San Jose home we work in.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Jose with years of craft heritage in the Bay Area.