Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Arlington
A new entry door in Arlington typically runs $1,200 to $4,800 installed, depending on whether you need a slab swap or full-frame replacement. Storm doors usually land between $400 and $1,100. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. If you’re in Arlington and wondering what the job should actually cost, call (888) 635-0804 and a live person will walk you through it.
Why TruePane Windows & Doors Is Arlington’s Preferred Door Installation Company
We’re not the cheapest bid in Arlington, and we’re fine with that. We’re the company that shows up when we say, measures the rough opening instead of guessing, and writes down exactly what both warranty layers cover. Dale Kessler founded TruePane in 2008 after watching too many homeowners get stuck with doors that bind in July and warranties that die hidden in fine print. The rule on his whiteboard hasn’t changed: if the pane is not true, the job is not done.
Arlington homeowners have dealt with us for years, and the thing we hear most is that we answer the phone. Not a voicemail tree. Not a call center three states away. A live person, 24 hours a day, seven days a week. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. When we finish a job in Arlington, we don’t vanish. The Done Right Promise is in writing, and we stand behind it.
Our Door Installation Services in Arlington
Entry & Swing Doors
Entry doors in Arlington’s older ranch neighborhoods, especially 76010, 76011, and 76012, usually need more than a slab replacement. The original rough openings have spent fifty or sixty years absorbing Tarrant County heat, and the steel frames are often corroded at the corners. We check the opening for square before we hang anything. If the jamb is out of true, we do a full-frame replacement and bring the opening back to level.

Storm Doors
Arlington sits in one of the most hail-active corridors in the country. A good storm door isn’t decoration here; it’s the first thing between your entry door and a June hailstorm. We install storm doors rated for impact and built to handle the UV load of a Texas summer, not the lightweight aluminum models that warp within three years. In 76013 and the neighborhoods around UT Arlington, we see a lot of homeowners adding storm doors for both hail protection and cross-ventilation.

Arched & Custom Doors
Many of Arlington’s 1960s and 1970s ranches have arched entryways, and replacing those doors with stock units is a poor fit. We measure the radius, order the custom door, and shim the opening so the reveal is even top to bottom. Custom doors take longer to fabricate, but the fit is the difference between a door that seals and one that whistles in February. This is where our full Door Installation team’s craft commitment shows up most.

Bifold & Folding Doors
Bifold and folding doors are common in Arlington homes with patios, pool access, or sunrooms. The issue we see most is a track that’s been knocked out of alignment by foundation movement, which is a fact of life in Tarrant County’s expansive clay soils. We reset the track, adjust the hinges, and check that every panel folds flush. If you’re in south Arlington near 76002, where post-1990s homes are aging into broken tracks and fogged glass, we’re familiar with the frame patterns and what they need.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and ES Windows. For Arlington’s climate, we often quote CGI, CWS, and Eco Window Systems side by side so you can see the difference in glass package, frame material, and warranty duration on paper before you spend a dollar. We don’t push one brand. We line up the options and let the numbers speak.
Common Door Installation Problems We See in Arlington Homes
- Corroded steel frames and corner-joint separation: Decades of North Texas heat cycling combined with Tarrant County’s hard water leave mineral deposits that accelerate corrosion at the frame welds. A flashlight pointed at the corners on a pre-bid walkthrough often reveals the problem instantly.
- Deteriorated rough openings in 1960s-1980s ranches: The original rough openings in east and central Arlington homes have absorbed decades of temperature swings. A simple slab swap won’t fix a rough opening that’s no longer square, so full-frame replacement is the honest recommendation.
- Septic and well setbacks on acreage: Arlington’s extraterritorial jurisdiction includes unincorporated county pockets in 76002 and 76004 where septic systems and wells sit close to the house. A door swing that encroaches on a leach field is a county code issue, and we verify setbacks before setting a single jamb.
- Thresholds on detached structures cracking from poor drainage: Detached garages, shops, and ADUs on south Arlington acreage often have slab-poured thresholds that crack when grading and drainage weren’t scoped first. We check the slope before we quote, so the threshold doesn’t become a puddle after the first heavy rain.
Pricing for Door Installation in Arlington, TX
Door replacement in Arlington runs a wide range because the housing stock does too. A basic slab swap in a newer home might cost $800 to $1,400. Full-frame replacement on a 1970s ranch with a deteriorated opening typically lands between $1,800 and $4,200, depending on the door, glass package, and how much jamb repair is required. Custom arched doors and folding door systems run higher, often $3,500 to $8,000 or more. Storm doors with impact glass usually sit between $600 and $1,400 installed. The honest answer is that no one can quote a door without seeing the rough opening, and we don’t pretend to. Call (888) 635-0804 and we’ll send a technician to measure, scope the setbacks if you’re on acreage, and hand you a line-item quote. Estimates are free.
We Also Serve Cities Near Arlington
Our crews regularly work throughout Arlington and the surrounding communities, including Grand Prairie, Kennedale, Euless, and Bedford. If you’re just outside the city line, the same team, same pricing structure, and same Done Right Promise apply. Call and we’ll confirm your address and schedule the walkthrough.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Arlington
Inside Arlington city limits, standard door replacement typically doesn’t require a city permit. But if your property sits in an unincorporated county pocket within Arlington’s extraterritorial jurisdiction, especially in parts of 76002 or 76004, Tarrant County handles permitting and setbacks for septic and well locations. We verify jurisdiction and pull any required permits before the job starts, so the inspection passes without a fight. Call (888) 635-0804 and we’ll confirm what applies to your address.
Door replacement itself won’t touch your septic or well, but the swing, landing, and any threshold work must respect Tarrant County’s setback requirements. If a new door swings into a leach field or a landing sits too close to a wellhead, the county will flag it. We check the setbacks during the walkthrough and adjust the door swing or landing placement before we quote, so there are no surprises at inspection. Call (888) 635-0804 to schedule a free estimate and we’ll scope it properly.
Because the rough openings have spent fifty to sixty years absorbing Tarrant County heat cycles, and the original steel frames are often corroded at the welds. A new slab hung in an out-of-square opening will bind, leak air, and never seal correctly. Full-frame replacement lets us square the opening, flash it properly, and set the new jamb true. That’s the difference between a door that works for five years and one that works for thirty. Call (888) 635-0804 for an honest assessment of your opening.
We treat detached structures the same as the main house on craftsmanship, but we scope a few things differently: material haul distances on south Arlington acreage, slab condition at the threshold, drainage slope, and any county setback rules for accessory structures. We replaced a warped hollow-core steel entry door on a 1970s ranch off East Abram Street in 76010 with an Andersen 3000 series fiberglass door with low-E glass sidelights. The original jamb had corner-joint separation from decades of heat cycling, so we did a full-frame replacement with flashing tape and new weatherstripping, then checked that the rough opening was square before hanging the new unit. That same discipline applies to your shop or ADU. Call (888) 635-0804 and we’ll scope the full job before quoting.
Impact-rated storm doors with reinforced glass and powder-coated frames hold up best in Arlington. The lightweight aluminum models you see at big-box stores warp within a few summers and offer little real hail protection. We quote CGI and CWS storm doors because their glass packages are built for North Texas hail and their frames are engineered for UV exposure. We’ll show you the warranty difference on paper. Call (888) 635-0804 and we’ll bring samples and pricing to your home.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Arlington and the surrounding communities with door installation done right the first time.



Before
After
Before
After
Before
After