Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Burbank
Door installation in Burbank typically runs $900-$3,200 for a standard pre-hung entry door, depending on whether the existing jamb is square and sound. That second part matters more in Burbank than almost anywhere else in the San Fernando Valley, because a large share of the city’s housing stock dates to the 1930s and 1940s, and those original jambs have spent eighty years settling, swelling, and being notched for retrofit work. Our crews know Magnolia Park, the streets west of Downtown, and the 91501 ZIP code well enough to tell you before we start whether your job is a clean swap or a reframe. Call (888) 635-0804 and we’ll come look at the actual opening, not a photo of it.
TruePane Windows & Doors has been installing doors in Burbank long enough that we keep a running mental catalog of what each neighborhood’s houses tend to hide behind the trim. We’re an authorized installer for more than a dozen manufacturer lines, our technicians are background-checked and uniformed, and a live person answers the phone when you call. No voicemail tree, no callback form. You get a square deal in writing before the first cut.
Why TruePane Windows & Doors Is Burbank’s Preferred Door Installation Company
Dale Kessler founded this company on a rule that still governs every job: if the pane is not true, the job is not done. That applies to door slabs, jambs, thresholds, and the framing behind them. We’re a second-generation glazier’s operation, not a franchise playbook, and we’ve put that rule to work in Burbank homes for years. The result is a local reputation built on doors that close square in August and seal tight when the Santa Anas push through the Verdugo pass.
Burbank homeowners have a specific set of concerns. They live under a flight path, they deal with summer temperatures that run 10 to 20 degrees hotter than the coast, and they own houses where the original door openings were framed before modern flashing standards existed. Our team plans for all of it. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s on every Burbank job we do.
We’re also easy to reach. Dispatch and scheduling are coordinated from our Los Angeles office, but crews serve Burbank locally. When you call (888) 635-0804, you’ll talk to a person who knows the difference between a 1940s Spanish Colonial jamb and a 1960s tract slider opening. We’ll be there when we say.
Our Door Installation Services in Burbank
Entry & Swing Doors
Entry doors take the most abuse in Burbank’s climate. Direct afternoon sun on west-facing exposures, Santa Ana-driven rain, and daily temperature swings that make wood expand and contract all season long. We install pre-hung entry systems from Andersen, Pella, Marvin, and PGT, and we also offer Impact Windows & Doors - Burbank for homeowners who need storm-rated protection. We’re careful about the details most crews skip: sill pans, backdams, flashing tape, and shims placed so the jamb stays true after the house settles another quarter inch. A new entry door in Burbank should last thirty years, and ours are installed that way.
Double & French Doors
French doors are common in Burbank’s ranch homes and Spanish Colonial Revivals, particularly where dining rooms open onto patios or side yards. The challenge here is thermal movement. An 8-foot-wide double door assembly in a Magnolia Park stucco house will move measurably between a 105° summer afternoon and a 40° winter night. We set French doors with that movement budgeted, so the astragal stays aligned and the weatherseal stays engaged. Whether you want a true divided-lite look to match original 1930s millwork or Energy-Efficient Windows - Burbank with Low-E insulated glass, we quote both options in writing.
Bifold & Folding Doors
Bifold and multi-panel folding doors are growing in Burbank, especially on mid-century homes where homeowners want to open up a wall to the yard. These systems are heavier than most people expect. A four-panel folding door can weigh several hundred pounds, and the header above it needs to carry that load plus the roof framing. In Burbank’s older homes, that often means adding an engineered beam. We handle that structural work as part of the same job, with the permit pulled and the inspection scheduled. No second crew, no separate contract, no change order that shows up after the wall is open.
Pivot Doors
Pivot doors make a statement, and Burbank has the Spanish and Mediterranean architecture to support it. A large pivot entry on a Chandler Boulevard-adjacent estate, or a custom pivot gate on a hillside property, transforms the front elevation. But a pivot door concentrates its load differently than a hinged door, and the floor track or top pivot must be anchored into structure, not just trim. We’ve installed pivot doors in Burbank where the existing header had to be upgraded before the leaf could hang. We quote that work up front, not as a surprise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We install and service doors from more than a dozen manufacturers, and we carry local parts stock for the brands Burbank homeowners ask for most: PGT, CGI, CWS, and Andersen. That means when a roller fails on a PGT sliding door in a Magnolia Park rancher, we don’t order a part from across the country and leave you waiting two weeks. Our Door Installation team brings what the job needs, and if a manufacturer line has a warranty claim, we register it and handle the paperwork. You shouldn’t have to fight a warranty department. That’s our job.
Common Door Installation Problems We See in Burbank Homes
Most Burbank door problems are not the slab. They’re the opening, the flashing, or the frame. Here’s what we encounter regularly:
- Rotted jambs and sills from forty years of Santa Ana-driven rain. Original 1940s wood jambs at the bottom corners, especially on the windward side of the house, often turn soft. A new pre-hung door dropped into that opening will sag within a season. We cut out the rot, reframe the bottom 12 to 18 inches, and install the new jamb plumb.
- Undersized headers above original door openings. In Burbank’s post-WWII tract homes, original headers were often sized close to minimum. When you widen the opening or hang a heavier pivot or folding door, the header may not carry the load. We identify this during the initial inspection and write the structural upgrade into the contract, not into a change order after demolition.
- Out-of-square rough openings in 1930s-1950s bungalows. Settling foundations and decades of forced-air retrofits leave many Burbank door openings out of square by half an inch or more. A pre-hung door won’t sit plumb in that opening unless the jamb is shimmed and the trim is custom-cut. Our crews do this on a weekly basis in Magnolia Park and west of Downtown.
- Missing sill pans and backdams on previous replacements. The recurring failure is a contractor who flashed a door with nothing under the threshold, then the first real winter storm funnels water under the threshold into the crawlspace. Burbank may not get much rain, but when it does, it comes with wind. A sill pan is cheap. Crawlspace rot is not.
Pricing for Door Installation in Burbank, CA
Here’s what Burbank homeowners should expect to pay, based on the jobs we’ve priced in recent years. A standard pre-hung entry door, steel or fiberglass, with a new jamb and threshold, runs $900-$1,800 if the opening is square and the framing is sound. A double French door set typically lands between $2,200 and $4,000. Custom pivot doors start around $3,500 and go up from there depending on size and hardware. If we find rot or an undersized header, that structural work typically adds $400-$1,200 to the total, and we’ll show you the line item in writing before we cut anything. Every TruePane estimate is itemized, fixed, and free. Call (888) 635-0804 to schedule yours.
We Also Serve Cities Near Burbank
If you’re in Burbank or one of the neighboring communities, we cover the whole corridor. Our crews work regularly in Glendale, North Hollywood, Universal City, and Tujunga. The same standards apply everywhere: written line-item quotes, permits pulled, warranties registered, and a live person on the phone.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Burbank
Burbank’s building code requires a permit when the door opening is altered, when the header or framing changes, or when the replacement door affects the structural envelope of the house. A simple slab swap in the existing jamb doesn’t always trigger one, but a pre-hung replacement often does, and a widened opening virtually always does. We pull permits on every job that requires one, and we schedule the inspection. Our pricing includes the permit fee when it’s needed. Call (888) 635-0804 and we’ll tell you whether your specific job needs a permit before you sign anything.
We inspect the opening before we write the estimate, and we look specifically for the failure modes common to Burbank’s housing stock: rotted sill corners from Santa Ana rain, notched jambs from old forced-air retrofits, headers sized for the original 1940s opening. If we find rot or an undersized header, we build the repair into the quote as a line item, with a dollar figure, before we start. If we open the wall and find something we couldn’t see, we stop, show you exactly what we found, and get written approval before continuing. That’s the Done Right promise in practice.
Yes. Doors are often the weak point in a noise-reduction strategy. In Burbank homes south and west of the airport, we install entry doors and Sliding & Patio Doors in Burbank with acoustic-rated glass, upgraded weathersealing, and doors with STC ratings that match the window package. A solid-core wood or composite door with an acoustic insert and proper perimeter seals can cut airport rumble measurably. We work with homeowners in the Magnolia Park corridor who are paying out of pocket after being denied FAA noise-mitigation grants, and we quote acoustic specs side by side with standard glass so you see exactly what the upgrade costs. Call (888) 635-0804 for a free estimate.
Yes, and here’s why. Burbank’s rain comes in short, wind-driven bursts, often with the Santa Anas behind it. That wind pushes water sideways into openings, and a door without a sill pan and flashing tape will collect it. The failure shows up not during the storm but months later, as rot spreading in the subfloor. We flash every door we install, even in dry years, because the cost of the tape is measured in tens of dollars and the cost of the repair is measured in thousands. We stand behind every install with the Done Right Promise, and flashing is part of the standard, not an upgrade.
A true custom arched door in Burbank, built to match the original profile of a 1930s Spanish Colonial entry, typically runs $3,800-$7,500 depending on wood species, glass, and hardware. That’s a wider spread than a standard rectangular door because the jamb, the arch form, and the millwork all get built to match the existing opening rather than adapted to a stock unit. Our Door Installation team has matched arched profiles on homes across Burbank, and we’ll show you a quote with the options broken out line by line. Call (888) 635-0804 and we’ll come measure the actual radius of your arch.
What Opening Up an Old Burbank Home Actually Turns Up
When you pull an 80-year-old jamb out of a Magnolia Park bungalow, you learn things about the house that no one could see from the outside. Maybe the framing around the door is notched from a 1970s forced-air retrofit. Maybe the sill plate has been soaking up moisture for decades. Maybe the original header is two 2x8s that won’t carry the load of a wider opening. We’ve replaced a corroded steel casement entry system on a 1940s Spanish Colonial where the wall opening was a full 3/4 inch out of square. The homeowner’s noise-mitigation project had stalled because no one knew how to handle that. Our crew installed a new Andersen entry door with a fusion-welded frame, custom-cut flashing tape, and re-shimmed jamb to restore a true weatherseal, then added an STC-rated insert so the door now blocks both the airport rumble and the summer heat.
That’s the work this page is about. In Burbank’s Magnolia Park and west-of-Downtown bungalow belt, original 1930s-1950s wood entry doors have jambs that have been repeatedly notched and patched to accommodate settling foundations and forced-air retrofits. A clean, square door installation is impossible without reframing the jamb first. You simply don’t face this with the same regularity in the newer Glendale tracts. It’s a Burbank condition, and we’ve built our estimating around it.
We handle it a specific way. Inspection first, before the quote. Allowances written into the contract for the structural surprises that old houses hide. And any discovery priced and approved in writing before the saw touches the wall. That’s the only honest way to work on a house built before 1950, and it’s why your remodel quote shouldn’t move after we start. If the framing is sound, we tell you that too. We don’t invent work that isn’t there.
When you’re ready to talk about your door, call (888) 635-0804. A live person answers, any hour, and we’ll set up a time to look at the actual opening. Estimates are free, written, and itemized. If you’ve lived in your Burbank house twenty years and intend to stay twenty more, you want a door that’s true, flashed, and square. That’s what we do.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Burbank and the San Fernando Valley.