Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Compton
Door installation in Compton, CA is different from door installation anywhere else, and we learned that the hard way so you don’t have to. A standard pre-hung door often will not fit a 1970s garage-conversion opening, security bars bolted through old jambs have to come off in a specific sequence, and county setback rules can stop a detached ADU door before it starts. TruePane Windows & Doors has worked in Compton long enough to know every one of these quirks. Call (888) 635-0804 for a free estimate, and you’ll speak with a live person who knows this city.
Why TruePane Windows & Doors Is Compton’s Preferred Door Installation Company
We’re not the cheapest bid in Compton, and we don’t try to be. We’re the crew that shows up when we say we will, measures every opening twice, and puts the warranty in writing before the truck leaves the driveway. Dale Kessler founded this company in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. That applies to a front entry door on a ranch home off Rosecrans Avenue the same as it does to a pivot door in a custom build near Richland Farms.
Compton homeowners call us because we understand what these houses need. The city’s stock is overwhelmingly post-WWII wood-frame bungalows and ranch homes built between 1945 and 1965. Those houses have settled. Their rough openings are rarely square. Their door frames have been modified over decades for security bars, storm doors, and retrofits that nobody pulled a permit for. We scope for that before we quote, not after we start swinging a hammer.
We also carry the brands Compton trusts. As an authorized installer for PGT, CGI, and ES Windows, among more than a dozen manufacturer lines, we can quote side by side on paper so you see exactly what you’re paying for. Our background-checked, uniformed technicians register both warranty layers in writing on every job. And if something isn’t right, the Done Right Promise means we make it right. No paperwork fights. No arguing.
Our Door Installation Services in Compton
Entry & Swing Doors
Entry doors take the most abuse in Compton’s inland heat, and the original hollow-core slabs from the 1950s and 60s were never built for 90-degree summers. We install fiberglass and steel entry doors with dual-pane Low-E glass that hold up to sun exposure and actually seal. The 90220 ZIP is full of homes where the front door has warped enough to show daylight around the frame. That’s a security issue and an energy issue, and we fix both.
Storm Doors
Storm doors are workhorse additions on Compton ranch homes, where the front door gets afternoon sun and the homeowner wants cross-ventilation without opening the house to the street. We measure and install storm doors that fit the existing jamb properly, including openings where old aluminum storm units left screw holes and stripped anchors. The frame gets reinforced before the new door goes on, not after.
Double & French Doors
Double doors on 1950s Compton bungalows often fail at the meeting stile because the header has sagged over seventy years. We don’t just replace the doors; we check the header, correct the rough opening if needed, and set the new units so they close with one hand. French doors get the same treatment, with sill pans and flashing tape spec’d for Compton’s occasional heavy winter rain.
Arched & Custom Doors
Some Compton homes, particularly the custom builds near Richland Farms and the larger lots east of the 710, have arched or non-standard entryways that stock doors will not fit. We order custom door units sized to the actual opening and install them with reinforced jambs and proper shimming. These jobs require patience and a tape measure, not a big-box stock SKU. We have both.
Bifold & Folding Doors
Bifold and folding door systems are popular for Compton homeowners opening up a rear wall to a patio or converting a garage door opening into living space. Seismic settling in this area means the floor is often not level under the track, so we check deflection and shim before mounting. A folding door that binds after six months is almost always an installation problem, not a product problem.
Pivot Doors
Pivot doors make sense on modernized Compton homes where the entryway is wide enough to handle the swing radius. These are heavy units; the floor pivot and overhead closer need precise alignment, or the door sags within a year. Our technicians install pivot doors on reinforced framing and register both hardware and glass warranty layers before they leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Compton
We are an authorized installer for more than a dozen manufacturer lines, and Compton homeowners most often ask for PGT, CGI, and ES Windows. That’s no surprise: PGT and CGI build impact-rated products that hold up to inland heat and unwanted entry attempts, and ES Windows offers the custom sizing that older Compton openings often require. We carry local parts inventory for common hinge, threshold, and weatherstripping replacements, which means most single-visit jobs stay single-visit. If you want side-by-side pricing on paper, we’ll quote the brands you’re considering and show you the differences in writing.
Common Door Installation Problems We See in Compton Homes
- 1970s garage-conversion rough openings that aren’t actually square. A stock pre-hung door goes in tight, jams on the latch side, and the homeowner blames the door. The real issue is the framing. We check for nominal versus actual jamb width before we order anything.
- Security bars bolted through the old door frame. On a ranch home off W. Alondra Blvd, our crew removed a 1962 slab door and found the jamb had been notched for old steel security bars, lag bolts still embedded. We reframed the rough opening to a true 36×80, set a fiberglass entry door with dual-pane Low-E glass, and reinstalled the owner’s bars using new standoff anchors.
- Standard exterior screws used on security-bar reinstalls. That fails inspection under Compton’s bar-anchor expectations for tamper resistance. We use tamper-resistant hardware and standoff anchors rated for the application, and we check with the homeowner before reusing old bar stock.
- Detached ADU doors scheduled before setback reviews. Compton properties with wells or septic systems fall under county requirements, including a 5-foot clearance from septic tank lines. If the door gets ordered before that review, it gets installed in the wrong place. We check the site plan first.
Pricing for Door Installation in Compton, CA
Door installation costs in Compton run higher than in neighboring Carson or Gardena because of the scope layers this city’s housing stock demands. A basic entry door swap in Compton typically runs $900 to $1,600 installed, assuming a true 36×80 rough opening and no bar work. Add security-bar removal and reinstallation, and that line item adds $150 to $350 per opening. If the rough opening is from a 1970s garage conversion and needs reframing to square, expect another $400 to $900 depending on the framing condition. Full custom door units, including arched or oversized openings, start around $2,200 and go up from there.
We give written line-item quotes before any work starts. You’ll see the door cost, the labor, the frame correction if needed, the bar work if needed, and the flashing and sill pan line items separately. No change orders unless you change the scope. Call (888) 635-0804 for a free estimate from someone who has actually worked in Compton.
We Also Serve Cities Near Compton
Our crews serve Compton and the surrounding South LA corridor, including Gardena, Carson, Lynwood, and Paramount. If you’re in one of those areas, our Door Installation team handles the same scope of work with the same Done Right Promise. For more about our work specifically in this city, see Door Installation in Compton.
Serving Compton, CA - Our Local Coverage Area
We’re based in the Compton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Compton
For a same-size exterior door replacement on an existing single-family home in Compton, you generally do not need a building permit, assuming the rough opening and structural header are not modified. But if the existing opening is from an unpermitted garage conversion or if we need to reframe the rough opening to correct it, that changes the picture and may require county review. We’ll tell you during the free estimate what your specific situation needs. Call (888) 635-0804 and we’ll walk your property, not just look at photos.
Yes, and we do this all the time in Compton. The bars typically come off first, but the order matters: on many older homes, the anchors are lag-bolted through the frame into the rough framing behind, so we have to deconstruct the old door partially before the bars release. We tag and set aside the bars, replace the door, then reinstall the bars using new standoff anchors rated for tamper resistance. The bars go back on the same day in most cases. Call (888) 635-0804 and we’ll walk you through the sequence for your specific opening.
Fiberglass is the best door material for Compton’s inland heat, by a wide margin. It does not warp like wood in sustained 90-plus degree afternoons, it does not dent like steel, and it takes a factory finish that holds up to sun exposure far longer than painted wood. Steel is a solid second choice if security is the primary concern, but it can heat-soak on a sun-facing entry. For most Compton ranch homes, we recommend fiberglass with dual-pane Low-E glass in any glazed panels. We quote PGT and CGI fiberglass lines side by side so you see the difference in writing.
Detached ADU door installs in Compton trigger county-level reviews that a standard replacement never touches. We check the site plan for septic tank lines and any well-distance requirements, because a door cannot be set within 5 feet of a septic line. We also verify the ADU’s rough opening dimensions on site, since many Compton ADUs were originally garage conversions or unpermitted additions with non-standard framing. The quote includes any framing correction and the county-compliant flashing and pan details. Call (888) 635-0804 with your site plan, and we’ll give you a straight answer before you order anything.
Because Compton homes get hit with winter rain that finds every gap. Sill pans and flashing tape are the difference between a door that sheds water for 30 years and a door that rots the subfloor and jamb within five. We build that line item into every exterior door install in Compton as standard practice, not as an upsell. If another contractor’s quote doesn’t include it, ask why. We’ll explain the water path on your specific home when we walk it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Compton with a Done Right Promise and The Keystone Standard on every job.