Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Crosby
Door installation in Crosby doesn’t start with a catalog. It starts with understanding what the San Jacinto floodplain, relentless Gulf humidity, and a wave of rushed post-Harvey rebuilds did to the door openings in this town. We’ve been walking those openings for years, and we know what’s behind the trim before we pull it. If you need a door that actually closes square, latches true, and holds up to the next storm season, call us at (888) 635-0804. We’ll measure twice, quote honest numbers on paper, and stand behind the work.
Why TruePane Windows & Doors Is Crosby’s Preferred Door Installation Company
Crosby homeowners tend to keep their houses a long time. So do we. TruePane has been serving Harris County communities since 2008 through a craft tradition that started with Dale Kessler, a second-generation glazier who got tired of watching out-of-true installs and voided warranties become the homeowner’s problem. That frustration became the founding rule still on the whiteboard today: if the pane is not true, the job is not done. It applies to every door we hang.
In Crosby specifically, we’ve earned a reputation for doing the unglamorous work right. That means pulling the old door, finding the rotted threshold shims or the slab perimeter out of level, and fixing the opening before we ever set the new unit. Background-checked, uniformed technicians handle every job. A live person answers the phone 24/7, not a voicemail tree. And both manufacturer warranty layers get registered in writing before the truck leaves the driveway. That’s The Keystone Standard, and it’s on every quote we hand a Crosby homeowner.
We also keep our promises local. The Done Right Promise means if something isn’t right after we leave, we make it right. No paperwork fights. No arguing. That matters in a town where plenty of people got burned by out-of-town crews during the Harvey rebuild rush.
Our Door Installation Services in Crosby
Entry & Swing Doors
Most Crosby ranch houses built in the 1970s through 1990s still carry their original entry doors, and the humidity here has not been kind to them. Aluminum frames corrode at the jamb, wood frames rot at the sill, and doors that once closed with a thumb now stick or sag. We replace them with properly flashed, square-set units built for this climate. A steel or fiberglass entry door with an insulated core and full perimeter weatherstripping changes how the whole front of the house feels, and how it holds up in July.
Storm Doors
On acreage lots across Crosby, storm doors serve double duty. They protect the main entry from driving rain when a squall pushes up Galveston Bay, and they let the breeze through on the hundred-degree afternoons when the air conditioner is fighting for its life. We install storm doors on wood-frame ranches and manufactured homes alike, including homes that shifted during Harvey. The key on a shifted frame is resetting the storm door’s Z-bar to match the actual plane of the wall, not the one it was built on.
Arched & Custom Doors
Some of the nicest older houses in Crosby have arched openings that were never meant to hold a stock unit from a big-box aisle. We measure those radius curves in the field, order the door to match, and hang it so the reveal is consistent all the way around. Custom arched doors take longer than a standard swing door, and they cost more. But on a 1970s ranch with good bones, they’re the difference between a front entry that looks intentional and one that looks patched.
Bifold & Folding Doors
For closets, pantries, and laundry rooms in older Crosby homes, bifold doors are often the original hardware hanging on by habit. They bind, they jump the track, and the bottom pivot wears through the floor plate. We replace them with properly aligned units, and we shim the top track so the door actually folds instead of dragging. It’s a small fix that makes a room feel like it works again.
Trusted Brands We Service in Crosby
We’re an authorized installer for more than a dozen manufacturer lines, and for Crosby homes we lean toward brands built for the Gulf Coast. Jeld-Wen, PGT, and CGI all make doors and glazing rated for hurricane wind loads, which this town has reason to take seriously. We also work with Milgard and Andersen lines for homeowners who want a specific look or a match to existing windows. Because we stock common components locally for Crosby jobs, turnaround is faster than you’d expect from a company that quotes manufacturer lines side by side on paper so you can see exactly what you’re paying for.
Common Door Installation Problems We See in Crosby Homes
- Doors that suddenly stop latching, blamed on settling. In Crosby, deadbolt misalignment and air gaps at the threshold are frequently residual flood-lift damage to the slab perimeter from Harvey, not the house settling. The door frame got pushed out of square and never came back. Our crews check the rough opening for square before we set anything.
- Corroded aluminum frames on original 1970s and 1980s units. Gulf Coast humidity plus decades of airborne salt from the Ship Channel corridor eats aluminum at the jamb. The frame swells, the door binds, and the weatherstripping shreds. Replacement means a properly flashed new frame, not a fresh coat of paint on the old one.
- Hollow-core doors on detached shops and outbuildings. On ungraded open lots, water runs toward the building after a hard rain. A hollow-core door set without flashing tape rots at the sill within a few seasons. We set exterior-grade units with full sill pan flashing, even on outbuildings.
- Manufactured homes still carrying single-pane aluminum doors. Many of Crosby’s manufactured homes have original doors that were never rated for wind load and are now twisted out of plane. The tub floor underneath flexed during Harvey, the door jamb shifted, and now the door leaks air and light. We reset the opening and replace the unit with a properly rated door that actually seals.
Pricing for Door Installation in Crosby, TX
A standard entry door replacement in Crosby typically runs $1,400 to $3,100 installed, depending on whether it’s a stock steel or fiberglass unit or something rated for hurricane wind loads. Storm doors usually fall between $600 and $1,400. Custom arched doors start around $3,200 and can run past $7,000 for a true radius unit with impact glazing. Bifold and interior door replacements run $400 to $1,200 per opening. What moves the number on a Crosby job is the condition of the rough opening. If we find rotted threshold shims or a slab perimeter out of level, we fix that before we set the door, and the quote reflects the actual work. No surprise line items later. Call (888) 635-0804 for a free estimate, and we’ll put the numbers on paper in front of you.
We Also Serve Cities Near Crosby
Our crews regularly work door installation jobs in Channelview, Humble, Kingwood, and La Porte. If you’re outside the 77532 zip code but still in the northeast Harris County corridor, call us. We know the roads, the permit offices, and the housing stock all through this part of Crosby and the surrounding communities.
Serving Crosby, TX - Our Local Coverage Area
We’re based in the Crosby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Crosby
Most of the time, the door didn’t move. The slab perimeter under it moved, left over from flood-lift pressure during Harvey. The frame got pushed slightly out of square, and now the deadbolt doesn’t line up. It’s residual flood damage, not settling, and the fix is resetting the rough opening before the new door goes in.
Yes. Door replacements in unincorporated Harris County typically require a county permit, not a city one. We pull the permit ourselves on every job that needs one, and we handle the inspection so you don’t have to chase the county office. Call (888) 635-0804 if you want to know whether your specific job needs one before we quote.
Crosby’s humidity cycles between wet and wetter most of the year, which means wood frames absorb moisture and move, and cheap weatherstripping loses its compression memory within a couple of seasons. We spec composite or steel frames and compression-style weatherstripping that holds its shape. It’s more money up front and less callout later.
Yes. The key is mounting the Z-bar to the actual plane of the wall, not the plane it was built on. We measure the shift, shim the bar, and set the door so it seals top and bottom. It’s common work for us on manufactured homes throughout Crosby.
Most custom arched doors in Crosby run $3,200 to $7,000 installed, depending on the radius, the material, and whether you need impact-rated glazing. The field measurement is the most important part. We trace the actual opening, order to match, and hang it square. Call (888) 635-0804 for a free estimate on your opening.
Call TruePane for Door Installation in Crosby
If you live in the 77532, on acreage off Miller-Wilson Road, in one of the older ranch subdivisions, or in a manufactured home that shifted during Harvey, we know what your door opening looks like before we ring the bell. Call (888) 635-0804 to schedule a free estimate. We’ll measure twice, quote both warranty layers in writing, and set a door that swings true and locks with one finger. If it’s not done right, we make it right. That’s the standard in Crosby, and it’s been our standard since 2008.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Crosby since the company’s founding through a craft tradition many years strong.