Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across East Los Angeles
Door installation in East Los Angeles costs $1,200 to $4,800 for a standard prehung entry door replacement, and $3,000 to $9,500 for a custom arched or oversized door with rejas removal and county permitting. Most jobs take one to two days on site plus the two to four weeks it takes to order a custom door to fit a 1920s-to-1950s stucco opening. We’re TruePane Windows & Doors, and we’ve been setting doors in East Los Angeles long enough to know the county inspectors, the rough-opening widths, and the wrought-iron rejas realities that change every quote. Call (888) 635-0804 and a live person will answer, 24 hours a day, seven days a week.
East Los Angeles is an unincorporated LA County community, which means the rules are different here than they are across the city line in Boyle Heights or Montebello. Different permitting office. Different egress codes. Different questions about the decorative security bars on half the homes we walk into. Our Door Installation team works in that reality every week, not as an exception but as the baseline.
Why TruePane Windows & Doors Is East Los Angeles’s Preferred Door Installation Company
We answer the phone. That matters more in East Los Angeles than most places because the homeowners calling us have usually owned their house on City Terrace or off Atlantic Boulevard for twenty, thirty, sometimes forty years. They’ve been through the contractor who quoted a door and then disappeared when the rough opening turned out to be two inches too narrow. They’ve watched a crew install a beautiful new entry door and leave the rejas propped against the stucco wall because nobody planned for them.
Dale Kessler founded this company in 2008 as a second-generation glazier who was tired of watching out-of-true installs and voided warranties go unfixed. The founding rule is still written on the whiteboard: if the pane is not true, the job is not done. That applies to every door we set in East Los Angeles. Our technicians are background-checked, uniformed, and trained to measure every opening twice before ordering anything. They quote manufacturer lines side by side on paper so you see exactly what you’re buying, and they register both warranty layers in writing before the truck leaves your driveway.
We back every install with the Done Right Promise. If something is not done right, we make it right. No paperwork fights, no arguing, no fine print that covers neither. And we carry East Los Angeles knowledge that an out-of-area crew simply doesn’t have: which years of stucco bungalows have which rough-opening widths, what the LA County DPW inspector will flag on a rejas install, and why an east-facing entry door needs different glazing than one in Culver City.
Our Door Installation Services in East Los Angeles
Entry & Swing Doors
A front entry door in East Los Angeles is doing more work than a front door in most of LA County. It’s the first thing a visitor sees on a 1930s Spanish Colonial off Whittier Boulevard, and it’s the surface that takes the full afternoon sun from the eastern basin’s inland heat. We install insulated steel, fiberglass, and solid wood entry doors, but before we quote anything we measure the rough opening, check the existing slab slope, and look at the rejas. Most pre-1960 openings here are 30 to 34 inches wide, and modern prehung doors start at 32 inches. That mismatch is the single biggest driver of price on an East LA entry door replacement. Expect $1,200 to $2,800 for a standard steel replacement, $1,800 to $4,000 for fiberglass, and $2,500 to $6,000 for a custom wood door sized to the existing stucco surround.
Double & French Doors
Double doors in East Los Angeles usually mean a 1940s or 1950s court apartment opening onto a rear patio, or a Spanish Colonial main entry with a transom and original arch. We replace both panels, rebuild the center mullion when it’s rotted, and set the new doors with compression weatherstripping that holds up to Santa Ana winds. French doors going onto a back garden in City Terrace need proper sill pans and flashing tape, because the first east-basin downpour will find any gap. Budget $2,400 to $5,500 for a full double-door replacement, including slab slope correction where needed.
Bifold & Folding Doors
Folding door systems are becoming common on the post-WWII stucco bungalows where owners want to open the whole rear wall to a new patio. East LA lots are small and the outdoor space is often the full room extension. We install multi-panel bifold systems from manufacturers we’re authorized to quote side by side on paper, including PGT and CGI. The opening has to be squared and often reframed, especially on stucco homes where the original back wall was sheathed in board and plaster rather than plywood. Realistic pricing in East Los Angeles runs $4,800 to $12,000 depending on panel count and glass package.
Pivot Doors
A pivot door is a specific look: heavy slab, offset hinge, a statement entry on a hillside home up near the 710 or on a corner lot off Eastern Avenue. We install them, but we also tell you the truth about what they require. A pivot door needs a perfectly level floor, a reinforced header, and enough room for the slab to swing through its arc without clipping a plaster return or a rejas frame. On East LA’s pre-1960 homes, that often means structural work before the door ever arrives. We scope that in the quote, not after the old door is in the dumpster. Pivot door installs here typically run $5,000 to $14,000.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in East Los Angeles
We are an authorized installer for more than a dozen manufacturer lines, and for East Los Angeles work we regularly quote PGT, CWS, and Ply Gem side by side on paper so you can compare the actual warranty terms, glass packages, and lead times. We stock common hinges, weatherstripping, and latching hardware locally for faster turns on service and small repairs across East LA, Belvedere, and City Terrace. If a manufacturer’s warranty claim comes up, we handle the paperwork because we registered your warranty layers in writing on install day.
Common Door Installation Problems We See in East Los Angeles Homes
- Narrow rough openings on 1920s-1950s stucco bungalows. Original door frames were milled to hold 1-3/8-inch-thick doors in 30-to-34-inch openings. Today’s standard prehung units are wider, so a crew that orders off the rack without measuring will be reframing in stucco on install day, and the homeowner pays for it.
- Rejas that no longer clear the new door’s swing. Nearly every pre-1960 East LA home with decorative wrought-iron security bars faces this. If the new door is hinged on the opposite side or is a different thickness, the old rejas frame may block the full opening or fail LA County egress code. Removing, refinishing, and reinstalling them adds two to four hours per opening, and sometimes requires quick-release egress hardware.
- Water intrusion under the sill during Santa Ana rains. We see original jalousie or steel-frame doors with no sill pan, no flashing tape, and no drainage slope. Swap in a standard panel door without fixing the slope and the first wind-driven storm pushes water under the threshold and into the subfloor.
- Uneven floors and out-of-square walls. Spanish Colonial and Craftsman homes settle, especially on hillside lots off Indiana Street or up toward Maravilla. A new door must be shimmed and squared to a plumb line, not to the old frame. We check level before we order anything.
Pricing for Door Installation in East Los Angeles, CA
| Door Type | Typical East LA Price Range | What Drives the Cost |
|---|---|---|
| Standard steel entry door | $1,200 – $2,800 | Rough opening width, rejas removal, hardware grade |
| Fiberglass entry door | $1,800 – $4,000 | Custom sizing, glass inserts, frame rebuild |
| Arched or custom wood door | $2,500 – $6,000 | Millwork, stucco matching, transom work |
| Double or French doors | $2,400 – $5,500 | Mullion rebuild, sill pan, drainage slope correction |
| Bifold / folding doors | $4,800 – $12,000 | Panel count, structural header, glass package |
| Pivot door | $5,000 – $14,000 | Reinforced framing, floor leveling, hardware |
Those are honest ranges for East Los Angeles. What changes them: whether we’re pulling permits through the LA County Department of Public Works (yes, for a permitted replacement, and the inspector will check egress), whether the rejas have to be removed and swapped for quick-release hardware, and whether the rough opening is standard or is one of the narrow 1920s-to-1950s frames we see on most of the housing stock here. We quote line items on paper before we start. No surprise charges on the final bill. Call (888) 635-0804 for a free, written estimate.
We Also Serve Cities Near East Los Angeles
TruePane crews work across the eastern LA basin, including Parkway, Arden-Arcade, Ladera Heights, and Commerce. If you’re on the county side of the line or just over it, the same team and the same Done Right Promise apply. Call us and we’ll tell you which permitting office governs your address before we ever open the truck.
Serving East Los Angeles, CA - Our Local Coverage Area
We’re based in the East Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in East Los Angeles
Yes, if the door is being replaced in an unincorporated East Los Angeles address, the permit pulls through the LA County Department of Public Works, not the City of LA Building & Safety, and the county inspector will check egress clearance before signing off. If you’re replacing like-for-like with no structural changes, some simple swaps may not require a permit, but any job that involves reframing the rough opening, moving a hinge, or altering egress does. We handle the permit for you and include the fee as a line item in the written quote. Call (888) 635-0804 and we’ll check your specific address against current county requirements.
Usually yes, but the rejas must be removed, stored, and reinstalled so the new door’s swing clears the full opening, and if the home’s bedroom egress route passes through that door, LA County code requires quick-release egress hardware. We recently replaced a rotted 1948 jalousie front door off Whittier Boulevard with a custom-ordered Jeld-Wen insulated steel entry system, and our crew spent an extra three hours removing, refinishing, and reinstalling the homeowner’s rejas to match the new door’s swing. The county inspector passed it. Call (888) 635-0804 and we’ll tell you what your rejas will need before we quote a number.
Because Montebello permits through its own city building department, while East Los Angeles pulls through LA County DPW, and because East LA’s housing stock is older and more uniform, with narrow stucco rough openings that force custom sizing and often extra stucco patching. Add the rejas labor and the east-basin sun requiring better low-E glazing, and the difference is real. We scope all of that in the written quote so you’re comparing line items, not surprises. Call (888) 635-0804 for a breakdown specific to your street.
Low-E dual-pane glass with a solar heat gain coefficient of 0.30 or lower is the right call for an east-facing entry in East Los Angeles, where the marine layer never arrives and summer highs routinely hit the mid-90s. A door with that glass package cuts heat transmission enough to notice on the cooling bill, and it protects the door finish from years of afternoon exposure. We quote low-E packages from Ply Gem, PGT, and CWS side by side on paper. Call (888) 635-0804 and we’ll show you the numbers.
Fiberglass is the better choice for a back door in East Los Angeles if the door is on a west-facing wall or takes any direct sun, because it carries less heat and does not dent. Steel is tougher if security or impact is your priority. Both are solid upgrades over a warped 1950s wood slab, and both need proper sill flashing and drainage correction to keep Santa Ana-driven rain from getting under the threshold. We’ll quote both options with actual lead times and warranty terms. Call (888) 635-0804 to schedule a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving East Los Angeles with the Done Right Promise and The Keystone Standard on every door.