Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Florence-Graham
Door installation in Florence-Graham runs $450-$1,900 for a standard prehung entry door in 2026, depending on whether the openings are original to a 1930s-1950s stucco bungalow or already modified. We serve Florence-Graham directly from our Los Angeles scheduling office, and our crews know the difference between a County permit and a City one before the first cut is made. Call (888) 635-0804 for a free estimate, and we’ll tell you what the opening actually needs, not what a catalog says it should need.
Why TruePane Windows & Doors Is Florence-Graham’s Preferred Door Installation Company
The reason homeowners in Florence-Graham call us back is less about coupons and more about a specific kind of competence: our team is led by Dale Kessler, a second-generation glazier who started TruePane in 2008 after watching too many county residents get stuck with doors that huffed dust off the I-110 and permit delays nobody explained in plain English. We carry the knowledge of how Florence-Graham’s housing stock actually behaves: dense 1930s-1950s stucco bungalows, original rusted steel casement frames, and rough openings a full two inches narrower than today’s standard door slabs. We do not send a salesman with a glossy brochure. We send a uniformed, background-checked technician who measures every opening twice and tells you whether that opening can accept a standard 36-inch prehung unit or whether it needs reframing.
We are not the cheapest bid in Florence-Graham, and that is by design. What we do is put the whole job on paper: manufacturer line side by side, both warranty layers registered in writing before the truck leaves the driveway, fixed pricing with no change orders. We are an authorized installer for, PGT, CGI, and ES Windows. If you have been burned once before by a door that binds in July or a warranty that turned out to be five pages of fine print, that history is why the Done Right Promise exists. We stand behind it, in writing.
Our Door Installation Services in Florence-Graham
Entry & Swing Doors
In Florence-Graham, entry door replacement usually starts with the same surprise: the original opening is 34 inches wide, not 36. That’s the standard for the stucco bungalows between the I-110 and I-105 corridors. We reframe narrow openings and install fiberglass or steel entry doors with low-E glass and fusion-welded frames, sealed with flashing tape to cut the dust and noise that track in from the freeways. One of our crews recently worked a 1940s bungalow near the I-110 where the original wood entry door had been buried under a security screen door for over a decade. The rough opening measured 34 inches, the jamb had pulled away from the frame, and the sill was rotting. We pulled the permit through LA County Building and Safety, reframed the opening, and installed a thermopane fiberglass door that closes tight and dead quiet.
Storm Doors
Security screen doors layered over deteriorating original wood doors are one of the most common sights in Florence-Graham. The screen door is often doing more harm than good: it traps moisture against the wood behind it, and that moisture rots the sill and jamb until the screen door itself starts to bind and scrape. We install modern storm doors with proper drainage plane details and laminated safety glass, which means the outer door serves as a barrier without destroying the door behind it. For homes wanting the durability of a security screen without the trapped-moisture problem, we spec storm doors with self-draining sill channels and stainless steel fasteners, the two details that stop the slow rot cycle for good.
Bifold & Folding Doors
Florence-Graham’s smaller bungalows don’t often have the wall space for large folding doors, but when a homeowner does open up an interior pass-through or converts a rear wall, we set the header first and the panels second. Bifold doors live and die by their hardware: plain steel rollers corrode and bind within a decade in the freeway-corridor air. We specify stainless steel tracks and rollers and set the door panels so the reveal is even through the full swing. The county’s Title 24 compliance documentation applies on these jobs too, and we handle it as part of the estimate.
Pivot Doors
Pivot doors are a specific request in Florence-Graham, usually from homeowners who have one oversized opening and want a statement piece that still seals against the South LA heat and the I-105 dust. The failures we see are always the same: cheap pivot hinges that sag under the door’s weight and a head detail that was never flashed, so the first rain sends water down the jamb. We install pivot doors with manufacturer-specified pivot hardware and full perimeter flashing, and we register the warranty before we leave. A pivot door done wrong is a thousand-dollar repair in five years. Done right, it is a door that outlasts the owner’s next three project ideas.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Florence-Graham
We’re an authorized installer for more than a dozen manufacturer lines, and for Florence-Graham homes we most often quote ES Windows, CGI, and ECO Window Systems side by side on paper so you can see exactly what the glass, frame, and hardware add up to. Every quote lists the manufacturer warranty duration and coverage in plain language. CGI and ES Windows are the two lines we lean on heavily near the freeway corridors, because they offer the acoustic and thermal performance that actually matters in this part of Los Angeles County. We stock factory parts and hardware locally through the Los Angeles office, which means our Door Installation team can often complete a full replacement in a single visit.
Common Door Installation Problems We See in Florence-Graham Homes
- Narrow rough openings. Original 1930s-1950s door frames were built for 34-inch slabs, not today’s 36-inch prehung units. A contractor who does not reframe will undersize the door and leave a gap at the jamb, and that gap becomes an air leak and a seal-failure point in the caulking within one season.
- Rotted sills under security screen doors. The screen door traps moisture against the wood entry door behind it. The sill rots, the jamb pulls away, and the door sags until it scrapes the threshold every time it opens.
- Corroded door frame fasteners. Doors set with plain steel screws in this freeway-adjacent air rust within a decade. The jamb loosens and the door cants, and soon the strike plate no longer lines up with the latch. The fix is stainless or hot-dip galvanized fasteners, spec’d at install time, not after the fact.
- Fogged glass in entry doors. Dual-pane door glass that fogs between the panes is a blown seal. This is extremely common near the I-110 and I-105 corridors, where constant vibration and extreme heat cycling fatigue the sealant. It cannot be repaired by cleaning; the insulated glass unit must be replaced.
Pricing for Door Installation in Florence-Graham, CA
A standard prehung entry door in Florence-Graham runs $450-$900 for a basic steel or fiberglass slab with painted frame. A thermopane fiberglass entry door with low-E glass and fusion-welded frame runs $900-$1,900. A storm door install typically adds $300-$650, depending on the glass package and whether the existing casing can be reused. A pivot door runs $1,800-$4,500, driven by the size of the door, the manufacturer, and the hinge hardware. What moves the price in Florence-Graham specifically is the narrow opening: most original bungalow openings need reframing, and that adds $250-$500 in material and labor before the door itself goes in. For an exact line-item quote, call (888) 635-0804 and we’ll send a technician. The estimate is free, and the number on paper is the number on the bill.
We Also Serve Cities Near Florence-Graham
TruePane serves Door Installation in Florence-Graham and the surrounding communities, including Parkway, Arden-Arcade, Ladera Heights, and Commerce. If your home sits in a neighboring city, we’ll still walk the same county permit path and show up with the same free estimate. Call (888) 635-0804 to schedule.
Serving Florence-Graham, CA - Our Local Coverage Area
We’re based in the Florence-Graham area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Florence-Graham
Florence-Graham is unincorporated Los Angeles County, so building permits for door installations come from LA County Public Works/Building and Safety, not LADBS. The county has its own fee schedule, a different inspector pool, and its own Title 24 compliance documentation. A contractor who shows up with City of LA paperwork is going to stall the job, often for days. We pull the correct permits as a matter of course, and we’ve never once been surprised by this jurisdiction split. Call (888) 635-0804 and we’ll handle the permitting correctly from the first visit.
In most cases, no. The original rough openings on those bungalows are built for 34-inch slabs, not the 36-inch prehung doors sold as standard today. You can undersize the door and caulk the gap, and that’s the cheap way, but the seal fails and the jamb never sits right. We’d rather reframe the opening to the correct size, set the new door plumb and square, and be done with it for good. The reframing cost is typically $250-$500 in Florence-Graham, and it’s the difference between a door that seals and one that fights you every summer.
Constant freeway noise, diesel particulate, and extreme heat cycling from the South LA urban heat island all put real stress on door seals, glass, and hardware. We recommend dual-pane low-E glass and a fusion-welded frame, not a single-pane slab. We also spec stainless or hot-dip galvanized fasteners rather than plain steel, because freeway-salted air corrodes plain steel within a decade and the door starts sagging. The upgrade is measured in hundreds of dollars, and the failure it prevents is measured in a full replacement.
The fog is a failed insulated glass seal, and no, it cannot be cleaned or repaired on site. The entire insulated glass unit, and often the door slab itself, must be replaced. Near the I-110 and I-105 corridors, vibration and heat fatiguing breaks seals faster than elsewhere in the county. We replace the glass unit under manufacturer warranty when the original warranty layers are registered, which is one more reason every TruePane job has both warranty layers in writing before the truck leaves the driveway. Call us for an exact price; the estimate is free.
Because the storm door traps moisture against the wood behind it, and that moisture is exactly what rotted the original door’s sill and jamb in the first place. A new storm door over a rotting wood entry door will not fix the air leak, the sag, or the security gap. The correct order is the entry door first, properly flashed and installed, then a storm door spec’d with drainage so the same rot cycle doesn’t start over. Call (888) 635-0804 and we’ll give you a line-item quote for the whole opening, not just the outer layer.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Dale has led TruePane since 2008, and his crews serve Florence-Graham and surrounding Los Angeles County communities with the same standard: if the pane is not true, the job is not done.