Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Irving
Door installation in Irving, TX typically runs $400 to $2,800 for most single-family entry doors, and $1,200 to $4,500 for sliding glass or multi-panel systems, depending on the door type and framing conditions. We serve every corner of Irving, from the 75060 ranch neighborhoods to the Las Colinas high-rises, and we know these two markets demand completely different approaches. Call (888) 635-0804 for a free estimate with written line-item pricing before any work begins.
TruePane has installed and replaced doors across Irving for years, and the one thing that separates this city from its neighbors is how dramatically the housing stock changes from one zip code to the next. That local knowledge matters when you’re deciding whether to reframe a clay-racked entryway or match a 1980s balcony slider in a condominium building. We measure twice, quote both warranty layers on paper, and register everything in writing before the truck leaves your driveway.
Why TruePane Windows & Doors Is Irving’s Preferred Door Installation Company
Irving homeowners call us because we do not treat a door replacement like a box-drop. Dale Kessler founded TruePane in 2008 on a rule that has not changed: if the pane is not true, the job is not done. That standard applies whether we’re resetting a front entry door on a 1950s brick ranch in 75060 or replacing ten identical balcony sliders in a Las Colinas tower near Williams Square.
Our technicians are background-checked, uniformed, and trained through an apprenticeship program that turns local hires into journeymen. We are an authorized installer for more than a dozen manufacturer lines, including. When we quote a door, we put the manufacturers side by side on paper so you see exactly what each line costs and what the warranty covers. No vague promises. Both warranty layers get registered in writing, with durations stated, before we leave.
One thing Irving residents appreciate: a live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree, not a call center. You call (888) 635-0804, someone picks up, and a truck is scheduled from our Dallas-Fort Worth office to your Irving address.
Our Door Installation Services in Irving
We install, replace, and service every door type common to Irving’s housing stock. Four categories cover most of the calls we take here. Each one has a different set of installation requirements depending on whether you’re in a 75060 ranch or a 75063 master-planned community.
Entry & Swing Doors
A front entry door in west Irving does more than look good. It has to survive North Texas clay soil movement that racks frames and tears weatherstripping. We install fusion-welded steel and fiberglass entry doors with movement-tolerant shimming, flashing tape, and threshold systems that close the gap that lets dust and heat into older 75060 and 75061 homes. Most single entry door installations in Irving run $900 to $2,800 including the door, hardware, and labor.
Double & French Doors
Double and French doors are popular in the 1980s and 1990s homes spread across north Irving and into the newer developments of 75063. These doors fail at the meeting stile when one slab settles and the other does not, which is a constant problem on expansive clay soil. We rebuild the rough opening, re-shim both sides to a true level, and set the astragal so the doors close square and seal tight. Expect $1,800 to $4,200 for a properly installed double door with a low-E glass package.
Bifold & Folding Doors
Bifold doors show up in Irving as closet and pantry doors in older ranch homes and as patio openings in higher-end Las Colinas properties. The common failure in the older homes is a bent track and worn pivot pins. In the newer builds, it is a misaligned panel stack from framing shrinkage. We replace or repair either way, and we stock common track and pivot hardware for Irving jobs so there is no second appointment left hanging. Typical bifold repair runs $225 to $500; full replacement with hardware runs $700 to $1,800.
Pivot Doors
Pivot doors have become a frequent request in the newer custom and semi-custom homes going up along the 75063 corridor and in gated Las Colinas communities. A pivot hinge carries the entire door weight at top and bottom, which means the floor plate and header blocking have to be dead level. We set pivot doors with structural blocking and adjustable floor closers so the door swings true on day one and five years later. Pivot door installation in Irving runs $2,500 to $6,000 depending on the slab size and hardware.
Sliding Glass Doors
Sliding glass doors deserve their own mention in Irving because Las Colinas is full of them. The 1980s and 1990s mid-rise buildings near the Mandalay Canal were built with identical builder-grade sliders across entire floors. Those doors are now past their service life. We replace them with modern low-E insulated units, and we have learned that when one unit’s dual-pane glass fogs, the adjacent units are usually weeks or months behind it. A single building canvass after one replacement job often turns into 10 to 30 same-model door replacements. That is a density of repeat work you will not find in the single-family neighborhoods across the rest of Irving. Sliding glass door replacement in Irving runs $1,200 to $4,500 depending on the panel width and glass package.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We install and service doors from CGI, CWS, and ES Windows, among other manufacturer lines. If you have an existing door from one of these brands, we can source the correct replacement hardware and glass packages without guessing. For Irving homeowners dealing with storm damage or hail-impact concerns, CGI and CWS both offer impact-rated door lines that hold up to the spring hail seasons this part of the Metroplex takes every few years. We keep common parts for these brands in local inventory, which shortens turnaround when a door fails. If the brand you have is not on this list, call anyway. We are an authorized installer for more than a dozen lines, and if we cannot match your existing door exactly, we will say so upfront and show you the closest alternatives on paper.
Common Door Installation Problems We See in Irving Homes
- Clay-soil frame racking in west Irving ranch homes. The expansive clay under 75060 and 75061 expands and contracts with moisture, and over twenty or thirty years that movement racks the door frame out of square. Doors start sticking in July, the jamb pulls away from the framing, and the threshold gap opens up. A door installed without movement-tolerant shimming will begin binding within a year. We shim every door to accommodate the soil movement this city is built on.
- Builder-grade sliding balcony doors in Las Colinas seal failure. The original 1980s and 1990s sliders in towers near Williams Square were installed in identical models across entire buildings. When the argon fill leaks out of one insulated glass unit, the condensation shows up inside the pane. Adjacent units typically follow within weeks because the seals were all manufactured at the same time and exposed to the same heat. We see this pattern constantly, and it means a single replacement often leads to a building-wide replacement program.
- HOA architectural restrictions in 75063 master-planned communities. Newer developments in north Irving have strict design guidelines. Replacing a front door with an off-spec style, a different glass type, or an unapproved paint finish can trigger a violation notice. We help homeowners work within those rules, and we document every specification so there is no dispute with the HOA board after the install is done.
- Hail damage from Irving’s spring storm corridor. Irving sits in one of the highest hail-frequency corridors in the country. Baseball-sized hail is a regular event in spring, and it takes out glass panes, dents steel doors, and breaks weatherstripping seals. We install impact-rated and laminated glass door packages as a standard conversation in this market, not an upsell. If you have already ignored two hail seasons, your front door glass is probably overdue for an upgrade.
Pricing for Door Installation in Irving, TX
Entry door replacement in Irving runs $400 to $1,000 for a basic steel slab on an existing square frame, and $900 to $2,800 for a full tear-out with a new pre-hung door, frame, flashing, and hardware. Double and French doors run $1,800 to $4,200. Sliding glass doors run $1,200 to $4,500 depending on panel width, glazing, and whether the track needs replacement. Pivot doors run $2,500 to $6,000. Storm doors, which we recommend for older west Irving homes without an overhang, run $350 to $900. The two biggest cost drivers in Irving are framing condition and HOA specification requirements. A door in a clay-racked 75060 ranch that needs reframing will run higher than a same-size door in a 75063 home with a square opening. We quote every job with a written line-item estimate, and our Done Right Promise covers the workmanship after we leave. Call (888) 635-0804 for an exact quote. Estimates are free, and a live person answers.
We Also Serve Cities Near Irving
TruePane installs doors across the Dallas-Fort Worth metro. If you are in Irving, we cover every zip code in the city. We also serve Dallas, Coppell, Euless, and Carrollton. Our Door Installation team handles the same work in every city we serve, and the estimate process is identical: a live person answers, we schedule the visit, and you get a written quote before any work begins.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Irving
The 1980s and 1990s buildings near Williams Square and the Mandalay Canal were built with identical builder-grade sliding glass doors across entire floors. The insulated glass units in those doors all have seals from the same manufacturing batch, and after 35 to 40 years of Texas heat, those seals fail within weeks or months of each other. If your unit’s door has fogged, expect the adjacent units to follow shortly. Call (888) 635-0804 and we can inspect your door and coordinate with your building management on a multi-unit replacement plan.
If you live in a single-family home without an HOA, a standard door replacement typically does not require a city permit, but if we need to modify the rough opening or reframe the doorway, a building permit may be required, and we pull it. If you live in a master-planned community in 75063 or a Las Colinas condominium building, your HOA or building board likely has architectural rules about door style, color, and glass type. We document every specification so you can file the paperwork before installation. Call (888) 635-0804 and we will help you determine what applies to your property.
It depends on the condition of the existing frame, but in 75060 we see more reframing jobs than slab-only swaps. The expansive clay soil under west Irving racks frames over time, and many original 1950s doorways are out of square by a quarter-inch or more. A slab-only replacement on a racked frame will begin binding within a year. In most 75060 homes we recommend pulling the old frame, setting a new pre-hung door with movement-tolerant shimming, and flashing the opening properly. That is a $900 to $2,800 job, and it is the only approach that keeps the door swinging true. Call (888) 635-0804 for a free inspection and a written quote.
For homes in Irving’s hail path, we recommend impact-rated or laminated glass for any door with a glass panel or sidelight. North Texas spring storms regularly produce baseball-sized hail, and standard annealed glass in a front door will not survive a direct hit. Impact-rated glass packages from manufacturers like CGI and CWS are built to take that impact without shattering, and they also provide better security. These glass packages add $300 to $900 to the door price in Irving. Call (888) 635-0804 and we will put the exact numbers in writing for your specific door.
No. Las Colinas condominium buildings near the Mandalay Canal have architectural rules that govern every exterior-facing door replacement, and most building boards require written approval before work begins. Working without approval can result in a violation notice, a fine, or a restoration order. We help condo owners prepare the specification package the board needs, and we can coordinate with building management when multiple units are replacing the same door model. The replacement itself is straightforward; the paperwork is the part most owners get wrong. Call (888) 635-0804 and we will walk you through the process for your building.
Get Your Free Door Installation Estimate in Irving
If you have a door that sticks in the summer, a slider with fogged glass, or a front entry that simply looks tired against the brick, we will give you a straight answer and a written price. No surprise line items, no pressure, no second appointment left hanging. Call (888) 635-0804 to schedule your free estimate. A live person answers, and we will be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Irving and the surrounding communities.