Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Westlake Village
Door installation in Westlake Village typically runs $1,400-$4,800 for a quality entry or French door system, with Chapter 7A compliant assemblies starting around $2,200 because this city sits inside a Very High Fire Hazard Severity Zone. We serve every ZIP in Westlake Village, 91359, and most jobs are quoted within 48 hours of your call. If you’re replacing a 1970s hollow-core entry door or an original aluminum slider that binds in July, call (888) 635-0804 and we’ll walk the site, measure twice, and put the quote on paper.
We’ve worked Westlake Village long enough to know the lot lines, the HOA expectations, and the code requirements that catch out-of-area crews off guard. The work happens on your schedule, on a tight cul-de-sac, with a crew that plans parking before the truck backs in.
Why TruePane Windows & Doors Is Westlake Village’s Preferred Door Installation Company
Founded by second-generation glazier Dale Kessler, TruePane has built its name in Westlake Village on a simple rule: if the pane is not true, the job is not done. Homeowners here remember the contractor who left them with a fogged seal and a door that binds in July. They call us because we do not do that.
Our Door Installation team works in Westlake Village every week. We know the 1960s tract homes north of the 101 and the Westlake Hills lots with side yards too narrow for a standard staging table. We’ve coordinated HOA exterior reviews, Chapter 7A inspections, and city permit portals on the same job, often on the same day. When a Westlake Village customer calls (888) 635-0804, a live person answers. Not a voicemail tree. Not a callback form. Every crew member is background-checked and uniformed, and they treat your driveway like their own mother’s.
Our Door Installation Services in Westlake Village
Entry & Swing Doors
A new entry door in Westlake Village does more than change the look of the house. It changes how the house holds heat in August and how it stands up to Santa Ana gusts in October. We install fiberglass and steel entry systems rated for energy efficiency and, where required, Chapter 7A compliance. Most single entry door replacements in Westlake Village run $1,400-$3,200 depending on slab, jamb condition, and whether the threshold needs fire-rated materials.
Double & French Doors
French doors are common in Westlake Village’s later 1980s builds, where homeowners wanted light and a view of the yard. The problem is the original wood frames shrink and gap seasonally. We replace them with properly flashed, square-set double door units that close tight and lock evenly. A double French door replacement here typically runs $2,800-$5,500, and the HOA usually wants to see the grille pattern and frame color before you pull the permit. We handle that review for you.
Bifold & Folding Doors
Bifold and folding door systems have become popular in Westlake Village for opening the living room to a patio or pool deck. The engineering is unforgiving: the header carries real weight, and the track has to be dead level over a span that might be 12 to 16 feet. On the 6,000-8,000 sq ft lots common here, we plan the staging so the old slab comes out and the new panels go in without blocking your neighbor’s shared driveway. Expect $4,000-$9,000 for a quality bifold system installed square and true.
Pivot Doors
A pivot door makes a statement on a Westlake Village entry, especially on the custom and semi-custom homes south of the 101. But a pivot door that is even slightly out of plane will scrape the floor, bind at the strike, and wear out expensive hardware in two seasons. We install pivot systems from manufacturers including PGT and ES Windows, and we check the jamb, the floor deflection, and the hinge axis before the door ever hangs. Budget $3,500-$8,000 depending on size and finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Westlake Village
We are an authorized installer for more than a dozen manufacturer lines, and for Westlake Village homeowners we often quote side by side on paper so you can see exactly what you’re buying. For impact-rated and WUI-compliant door systems, we work with PGT, CGI, and ES Windows. Because we stock common hardware and weatherstripping for these lines locally, a warranty follow-up or adjustment in Westlake Village usually happens in a single trip. Both warranty layers get registered in writing before the truck leaves your driveway, and the durations are stated on the quote.
Common Door Installation Problems We See in Westlake Village Homes
- Chapter 7A compliance gaps. Original wood entry doors from the 1970s shrink and gap seasonally in the Conejo Valley’s 100°F heat swings. Those gaps let embers enter during Santa Ana wind events, which is a fire-safety violation under California Building Code Chapter 7A. We replace them with properly rated assemblies that pass inspection the first time.
- HOA stop-work orders. Out-of-area installers routinely forget that most Westlake Village lots require HOA exterior review before permits are pulled. A non-approved pivot door or an arched door with the wrong grille pattern can trigger a stop-work order, and the homeowner eats the re-installation cost. We file the HOA package and coordinate the review as part of the job.
- Staging and access failures. Cramped side yards on Westlake Village lots leave no room to stage a pre-hung door. Crews who do not plan parking and sheeting scratch stucco, block a neighbor’s shared driveway, and generate noise complaints that end up in front of the HOA board. We plan access before we quote, and the plan is written into the estimate.
- Seasonal racking of wood doors. Solid wood entry doors in Westlake Village rack out of square every fall, not because the door is bad but because the frame was never flashed or backer-sealed properly against the valley’s heat-dry cycles. The fix is a properly shimmed, backer-rodded, and flashed jamb, not a new slab. We rebuild the rough opening when the old one is out of true.
Pricing for Door Installation in Westlake Village, CA
Here is what we quote in Westlake Village, based on the jobs we have done here:
- Entry door replacement: $1,400-$3,200
- Double French door replacement: $2,800-$5,500
- Chapter 7A compliant entry or French door system: $2,200-$6,000
- Bifold or folding door system: $4,000-$9,000
- Pivot door installation: $3,500-$8,000
- Door slab replacement with new weatherstripping and threshold: $700-$1,700
The three things that move the number the most in Westlake Village are HOA-required finishes, Chapter 7A materials, and lot access. A tight cul-de-sac with no staging room adds time and care, and that is reflected honestly on the quote. We give fixed pricing with no change orders, and we pull permits and pass inspections. Call (888) 635-0804 for a free, line-item estimate. The ask is the estimate, not the job.
We Also Serve Cities Near Westlake Village
TruePane installs doors across the Conejo Valley and surrounding communities. In addition to Door Installation in Westlake Village, we serve Thousand Oaks, Agoura Hills, Oak Park, and Calabasas. The same crew, the same Done Right Promise, and the same live person on the phone when you call.
Serving Westlake Village, CA - Our Local Coverage Area
We’re based in the Westlake Village area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Westlake Village
Yes. Most homes in that tract fall within the Very High Fire Hazard Severity Zone, so a door replacement that changes the exterior assembly will require Chapter 7A compliance on ember-resistant weatherstripping, threshold materials, and glazing. We confirm the map designation with the city before quoting, so there are no surprises at inspection. Call (888) 635-0804 and we’ll check your address.
It can move the labor line by $150-$400 on a typical job. If the truck has to park a block away or the side yard cannot hold a staging table, we plan for that in the estimate instead of discovering it on install day. We’d rather price it once and do it right than surprise you with a change order. Call (888) 635-0804 for a quote that accounts for your actual lot.
Often, yes. Westlake Village’s planned-community covenants govern exterior appearance tightly, and many HOAs require the grille pattern and frame color to match the neighborhood standard regardless of species. We prepare the HOA submission drawings and coordinate the review before permits are pulled. You never have to chase the board.
Sometimes, but not always. A 1970s tract home may have load-bearing interior walls that are not obvious from the floor plan, and a pocket door needs a header and structural pocket frame. We check the framing, and if the wall is load-bearing, we speak plainly: the job either needs an engineered header or it should not be done the way you first pictured it. We will quote what is safe, not what is easy. Call (888) 635-0804 to have us look at the wall.
Because Westlake Village’s Conejo Valley position gets hotter summer highs and stronger downslope Santa Ana gusts than Calabasas, and the wood frame shrinks across that heat-dry cycle. The fix is a properly flashed and backer-rodded jamb, not a new slab. We rebuild the rough opening to stay square through the seasons, and we stand behind it for 90 days with the full warranty registered in writing.
The Westlake Village Lot Problem, Solved Before the Quote
Most guides to door installation treat HOA review, fire code, and lot access as separate line items. In Westlake Village they are one workflow, and this page is the only one that treats them that way. On a 2004 single-story lot in the Westlake Hills tract, our crew replaced a corroded original aluminum slider and an adjacent hollow-core entry door with a Milgard Trinsic swinging patio door and a ViewLux fiberglass entry system. The HOA required a specific matte bronze frame color and no visible fasteners, so we staged the old slab and jamb on the driveway behind a dust-containment curtain and coordinated two separate inspections with the city’s online portal before resetting the threshold with flashing tape and backer rod. The neighbor’s shared driveway stayed clear, the HOA package was approved before the first cut, and the door closes square in October.
That is the job. Planned, permitted, and done right. If you want a door installed in Westlake Village by a crew that thinks through the lot, the fire code, and the HOA before the truck backs in, call (888) 635-0804 for a free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Westlake Village and the Conejo Valley since 2008.