Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Energy-Efficient Windows Across Hurst
Energy-efficient window replacement in Hurst typically runs $90-$130 per square foot installed for vinyl double-pane with Low-E glass, and most jobs on 1960s-70s brick ranches take one to two days once custom units arrive. We schedule free estimates across both 76053 and 76054 within a few days, and our crews already know the streets, the slab conditions, and the city’s permit expectations. Call (888) 635-0804 and a live person answers, day or night.
This is not a generic window page. It’s written for the homeowner in Hurst who has aluminum single-panes that sweat in July, a door that won’t latch by August, and a house sitting on clay that moves. We’ll explain what that means for your windows, what it costs, and how we work without tearing up your flower beds.
Why TruePane Windows & Doors Is Hurst’s Preferred Energy-Efficient Windows Company
TruePane has been installing and replacing windows across the Mid-Cities since 2008, and Hurst is one of the towns we know block by block. The work here follows a pattern: brick veneer ranch, original aluminum frames, rough openings that shifted out of square years ago. Generic install crews underbid that work and then discover the slab has moved. We quote it correctly the first time.
Dale Kessler founded the company as a second-generation glazier, and the rule on his whiteboard still governs every install: if the pane is not true, the job is not done. Every Hurst job is covered by our Done Right Promise and The Keystone Standard. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves the driveway. That means there’s no fine print to fight over if something isn’t right.
When you call, a live person answers. Not a voicemail tree, not a regional call center. You’ll speak to someone who knows what a Precinct Line Road ranch looks like and why July condensation shows up on the inside of every west-facing window. Our technicians are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s.
Our Energy-Efficient Windows Services in Hurst
Here’s what we actually do in Hurst, and why each service matters for houses built the way yours was built. If you need the full breakdown on Energy-Efficient Windows, that page covers our complete process. This page is about how it works here.
Low-E & Argon Gas Glass
Low-E coating is not an upsell in Hurst. It’s the difference between a living room that holds 72 degrees and one that fights the air conditioner from noon to eight. Argon gas between the panes slows heat transfer through the glass itself. On a 1968 ranch with west-facing windows off Hurstview Drive, this combination is the single biggest thermal improvement most homeowners can make without touching the walls.

ENERGY STAR Replacement Windows
ENERGY STAR rated units for North Texas are built for exactly the conditions Hurst delivers: triple-digit summers, hail season, and the odd hard freeze that makes old aluminum contract and leak at the jamb. The rating means the unit meets federal performance standards for the North-Central climate zone. We install ENERGY STAR qualified vinyl double-hung and casement units as the standard upgrade path for the 1960s-70s housing stock in both 76053 and 76054.

Double & Triple Pane Windows
Double-pane is the floor for energy work in Hurst, not the ceiling. Most older ranches we see have single-pane aluminum sliders that are forty to sixty years past their thermal lifespan. Double-pane with Low-E and argon handles the heat and the condensation problem. Triple-pane adds a third layer and a second insulating cavity, and we often specify it for bedrooms on the west elevation or for homes right on Precinct Line Road where traffic noise adds to the discomfort.

UV-Blocking & Fade Protection
Ultraviolet light in a Texas summer doesn’t affect comfort only. It fades upholstery, rugs, and wood floors within a few seasons if windows face the afternoon sun. UV-blocking coatings in modern Low-E glass cut the wavelengths that do the fading while still letting visible light through. For a Hurst homeowner with east or south windows in a house they’ve lived in for twenty years, that means the next sofa lasts longer than the last one did.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
TruePane is an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper so you see exactly what you’re buying. For Hurst energy work we commonly specify CGI, CWS, and ES Windows, all of which hold up under North Texas hail and heat. Because we handle these lines directly, our Hurst customers get factory-supported warranties we register in writing before we leave the driveway. No middleman, no waiting on a third party to answer a warranty question.
Common Energy-Efficient Windows Problems We See in Hurst Homes
- Racked rough openings. Blackland Prairie clay under the slab expands and contracts with moisture through the seasons. Over forty or fifty years, that movement shifts door frames and window rough openings out of square. A stock replacement unit won’t seat correctly, so we shim, square, and flash every opening as standard on Hurst jobs. Skipping that step is why cheap installs bind and leak within two years.
- July condensation on old single-panes. When interior air at 72 degrees meets 104-degree exterior glass through aluminum, the inside pane sweats every afternoon. That’s seal failure made visible. We see it on west-facing windows throughout 76053 and 76054 every summer, and it’s usually the moment a homeowner realizes the windows are done.
- Hail-pitted glazing hiding stress cracks. Hurst gets hail. The old aluminum glazing takes the hits, and the damage hides in the corners until a Low-E quote reveals cracks that demand a full sash replacement rather than glass only. We check for that on every estimate.
- Air leaks through frames after winter freezes. Aluminum contracts in a hard freeze, then leaks at the jamb when the wind picks up. If a retrofit unit goes in over that without flashing and air sealing, the leak stays and the new window takes the blame. We strip and flash, not just cover.
Pricing for Energy-Efficient Windows in Hurst, TX
For a standard vinyl replacement with Low-E glass and argon fill, expect $90-$130 per square foot installed. That’s the realistic Hurst range for a mid-grade double-hung or casement from a line like ES Windows or CWS, including shimming and flashing the rough opening. A basic double-pane slider without Low-E can run $70-$90 per square foot. Triple-pane and custom sizes push toward the top of the range and beyond, especially when an original 1960s rough opening is non-standard and requires a custom-order unit. Window energy audits run $150-$300 depending on the number of openings and access.
On a 1968 ranch off Hurstview Drive, we found seal failure in three rooms and out-of-square openings in two more. The fix was custom double-hung vinyl with Low-E and argon fill, staged entirely on the driveway so the narrow side yard stayed clear and the brick flower bed never got touched. The quote reflected the shimming and flashing the house actually needed, not just a unit swap. Call (888) 635-0804 and we’ll give you a written line-item estimate, free.
We Also Serve Cities Near Hurst
TruePane crews work throughout the Mid-Cities, including Bedford, North Richland Hills, Colleyville, and Euless. If you’re just over the Hurst line in any direction, the same local crews and the same warranty terms apply. Call and tell us which side of the line you’re on and we’ll schedule the estimate accordingly.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Energy-Efficient Windows in Hurst
Because the original rough openings on 1960s-70s brick ranches in Hurst were built to the sizes of now-obsolete aluminum frames, and the Blackland Prairie clay has shifted many of those openings out of square since. A stock vinyl unit often won’t seat without leaving gaps we’d have to fill with sloppy shims or oversized trim. Custom-order lets us fit the actual opening, square it, and flash it properly. Call (888) 635-0804 for a measure and a quote that accounts for your specific openings.
If the frames are square, operate smoothly, and the only problem is fogged or cracked glass, a glass-only upgrade may work. If the frames are pitted from hail, binding from slab movement, or leaking at the jamb after winter freezes, you need full replacement. Most original aluminum in Hurst is past the point where glass-only makes sense. We’ll tell you which one you have, and give you the quote either way.
No. We stage materials on the driveway and set scaffold planks across walkways so the narrow side yards common on Hurst ranches stay clear. On the 1968 Hurstview Drive job we kept the whole install off the shared wall and the flower bed untouched. If access is too tight for our standard setup, we’ll tell you during the estimate and adjust the plan and the quote before work starts.
That’s seal failure made visible. The original aluminum frames conduct heat, and when the July temperature delta across the glass hits its peak, moisture condenses on the inside pane every afternoon. It’s not a cleaning issue and it’s not a humidity problem in the house. It’s a spent thermal seal. Low-E double-pane replacement with argon fill fixes it. Call (888) 635-0804 if you’re seeing afternoon fog on more than one window.
Window replacement in Hurst typically requires a permit, and on the tight lots of the older ranch neighborhoods that means the city will check for setback compliance, clear access, and proper disposal. TruePane pulls the permit and passes the inspection as part of the job. We also coordinate staging so we’re not blocking a neighbor’s gate or parking a truck across a shared driveway. You’ll get the permit details in the written quote, not as a surprise after we start.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hurst with energy-efficient window installation since 2008.



Before
After
Before
After
Before
After