Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Impact Windows & Doors Across Kentfield
Impact windows and doors in Kentfield protect more than glass. They hold the line against wildfire ember intrusion, keep the damp out of aging wood frames, and pass Marin County’s design-review process without a fight. TruePane Windows & Doors installs and replaces impact-rated windows, entry doors, sliding glass doors, and garage doors for Kentfield homeowners, and we have spent years learning what this particular valley does to a window opening. Call (888) 635-0804 for a free estimate, and you’ll get a live person, not a recording.
Most Kentfield homes were built between the 1920s and 1960s, and the original wood double-hungs and casements are still doing a job they were never designed for: standing up to sustained drip-moisture from a redwood and oak canopy that shades most lots for half the year. When we replace those windows, the work has to satisfy Marin County design review, the homeowner’s eye for period proportion, and the fire code. That’s the job we do.
Keep reading for the county-specific details, the local failure patterns, and the honest pricing for Impact Windows & Doors work here. If you’d rather talk first, call (888) 635-0804. Dale Kessler and the crew answer the phone.
Key Takeaways for Kentfield Homeowners
- Replacement impact windows in Kentfield typically run $1,400 to $3,800 per opening installed, with entry and French doors running $4,200 to $9,500 depending on fire-rating and frame material.
- Most Kentfield homes fall under Marin County design review, which restricts frame profiles, finishes, and lite patterns. A basic vinyl swap rarely passes.
- Hillside lots in the Very High Fire Hazard Severity Zone require impact-rated or fire-rated glazing assemblies. We handle the paperwork and the install.
- On cramped upslope streets, access and staging affect the quote. We tell you that cost up front, on paper.
- The Done Right Promise applies to every job. If it’s not done right, we make it right. No arguing, no fine print.
Why TruePane Windows & Doors Is Kentfield’s Preferred Impact Windows & Doors Company
Dale Kessler founded TruePane in 2008 out of a second-generation glazier’s conviction that out-of-true installs and voided warranties were problems worth fixing for good. That means we register both layers of every manufacturer warranty in writing before the truck leaves your driveway. It also means we do not rush a job on a tight Kentfield lot, because the site constraints here are real and rushing is how corners get cut.
Our installers are background-checked and uniformed, and they measure every opening twice before any glass is ordered. Kentfield homeowners often tell us the same thing: another company quoted them a stock unit, then discovered on install day that the rough opening had settled out of square. We measure first, quote on paper, and stand behind the work.
We have worked on the flat streets off Sir Francis Drake, the upslope lots near Woodland Road, and the older Craftsman houses north of College of Marin. That local repetition matters. It means we know which trim profiles the county reviewer has accepted before, which sill pans fail first under redwood duff, and which staging setups actually fit on a 14-foot-wide driveway. Dispatch is coordinated from our San Francisco Bay Area office, and crews serve Kentfield directly.
The Keystone Standard governs every opening we touch. That’s the name for how we work: both warranty layers registered in writing, durations stated, and the Done Right Promise backing the labor. If the pane is not true, the job is not done.
Our Impact Windows & Doors Services in Kentfield
Hurricane Impact Windows
Most Kentfield homes do not need hurricane glazing because of coastal storms. They need it because the county’s wildfire code treats wind-borne debris and ember intrusion as the same problem: a breached opening exposes the whole structure. We install impact-rated double-hungs, casements, and picture windows that replicate the true or simulated-divided lite patterns found on 1920s Craftsman and 1950s ranch homes. You keep the look. You gain the glazing.

Impact Entry & French Doors
A front door off a curved Kentfield walkway has to do three things: hold its R-value against morning condensation, swing true through July’s dry heat and January’s wet, and meet fire-door assembly requirements on hillside parcels. We quote entry and French door replacements in wood, clad-wood, and steel, with side-lite and transom patterns that match the original proportions. County design review here is not optional, and we draw the elevations to match what the reviewer expects to see.

Impact Sliding Glass Doors
Sliders in 1960s Kentfield ranchers often open onto a patio that catches afternoon sun and a lot of redwood needle drop. The original aluminum tracks bind, the rollers wear, and the thresholds eventually rot at the corners. We replace them with impact-rated sliders that drain correctly and operate with one hand. The frame profile matters on these homes. We quote manufacturer lines side by side so you can see the difference in glass, frame, and warranty on paper.

Impact Garage Doors
The attached garages on Kentfield’s older homes often sit at grade level, which means leaf litter and moisture push against the bottom seal nine months a year. Impact-rated garage doors solve the ember-intrusion risk and the binding problem at once. We install them, balance them, and set the bottom seal on a dry, pitched threshold so water runs away from the door. It’s a detail most crews skip.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
One Local Truth: Design Review Controls Every Window You Replace in Kentfield
If you live in the unincorporated Ross Valley portion of Kentfield, you’re not just replacing a window. You’re submitting it to Marin County’s design-review process, and that process has a long memory for cheap replacements. A standard white vinyl double-hung with a snap-in muntin grid gets flagged. It doesn’t match the true-divided lite on a 1930s Tudor. It doesn’t hold the sightline of an original wood casement on a 1950s estate off Crown Road. And once a project gets flagged, the clock stops and the re-submittal starts.
We’ve been through this enough times to know what passes and what gets bounced. We draw the replacement to match the original opening, the original lite pattern, and the original exterior reveal. Then we quote the glazing and frame materials that satisfy the county and the homeowner. Sometimes that’s a Marvin clad-wood casement with simulated divided lites. Sometimes it’s a Milgard impact-rated double-hung with a narrower frame than stock. We figure that out before you spend a dollar, not after.
There’s also the wildfire piece. Many Kentfield parcels sit in the Very High Fire Hazard Severity Zone. That means the glazing and the frame assembly have to meet fire-resistance standards, not just wind ratings. Non-fire-rated windows and doors can fail county review outright. We calculate the fire-assembly requirements for your parcel as part of the estimate, because fixing that after the fact means re-buying glass and re-framing openings.
What We See on Tight Kentfield Lots
Kentfield doesn’t have big flat parcels. It has narrow upslope driveways, shared fences, and retaining walls that have been there since the Works Progress Administration. On a hillside street off Woodland Road, our crew replaced a rotting wood double-hung with a Marvin impact-rated casement while keeping all staging on the driveway. We used a chip tray against the neighbor’s shared fence so nothing landed over the property line. The old sill had wicked moisture from packed redwood duff into the king studs, so we sistered new framing, flashed the rough opening with butyl tape, and reinstalled the original trim profile to pass county design review. The homeowner now gets a true divided-lite look with low-E glass and an argon fill that handles the morning drip cycle.
That’s a typical day for us in Kentfield. The lots here demand more cleanup, more neighbor communication, and more patience than a suburban tract job. We carry tarps, mag brooms, and gasketed door seals for dust control. We tell the neighbors next door what days we’ll be working, because their wall might share a property line with your window opening. Access dictates staging, and staging dictates a big part of the quote. We lay that out in writing so there’s no surprise line item on the bill.
Common Impact Windows & Doors Problems We See in Kentfield Homes
- Redwood duff and leaf litter packed against sill pans. On wooded streets, needles and duff pile against the sill pan and hold moisture for months at a time. By the time a homeowner notices peeling paint or a sticking sash, rot has often wicked up from the sill into the king studs.
- Morning condensation and permanent fog between panes. The Ross Valley floor collects heavy morning condensation under the canopy. Wood double-hungs swell and stick, and when the insulated glass unit seal fails, the fog never clears. It’s a seal replacement, not a glass-cleaning problem.
- Settled rough openings on hillside lots. Foundation movement on upslope homes knocks rough openings out of square. A stock unit won’t seat. We measure and order to the actual opening, then flash and shim to square.
- Non-fire-rated glazing that fails county review. Homeowners sometimes discover after purchase that the windows they bought don’t meet the fire-assembly standard for their zone. We sort that out before the order goes in.
Trusted Brands We Service in Kentfield
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and Ply Gem. We quote these lines side by side on paper so you can compare glass packages, frame materials, warranty durations, and price. Kentfield jobs often call for a specific make because of the county’s profile requirements. We’ll tell you which ones satisfy the reviewer and which ones don’t. Parts and service turnaround for Kentfield customers is measured in days, not weeks, because we keep local stock for the common lines.
Pricing for Impact Windows & Doors in Kentfield, CA
A typical impact-rated replacement window in Kentfield runs $1,400 to $3,800 installed, depending on the frame material, lite pattern, and whether the rough opening needs reframing. Entry and French doors run $4,200 to $9,500 installed. Impact garage doors run $3,800 to $7,200, and a full slider replacement typically runs $5,500 to $11,000. Hillside parcels in the fire hazard zone often add 10 to 20 percent for fire-rated glazing and assembly hardware, and tight access that requires hand-carrying materials adds to labor. We give you a written line-item estimate before work begins. Call (888) 635-0804 and we’ll walk the property and price it properly. Estimates are free.
We Also Serve Cities Near Kentfield
Our crews cover Impact Windows & Doors in Kentfield and the surrounding Ross Valley communities. We work in Larkspur, San Anselmo, San Rafael, and Corte Madera. If you’re just outside Kentfield and wondering whether we cover your street, call us. We probably do.
Serving Kentfield, CA - Our Local Coverage Area
We’re based in the Kentfield area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in Kentfield
In most cases, yes. Kentfield is unincorporated Marin County, and the design-review process applies to replacement windows and doors on most 1920s to 1960s homes. You’ll need historically sympathetic profiles, finishes, and lite patterns. We prepare the drawings and the application as part of the job. Call (888) 635-0804 and we can look up your parcel’s specific requirements before you spend anything.
Yes, often the sash and frame are sound and the failure is the insulated glass unit seal. We replace the glazing unit and reglaze the sash. If the sill or stiles have rot, we rebuild or replace those parts. The fog between panes won’t clear on its own, so the sooner you call, the less water damage the frame absorbs. Call (888) 635-0804 for an inspection.
Yes. Impact-rated glazing with the correct frame and assembly often satisfies the wind and fire portions of the code when the home sits in a designated fire hazard zone. We verify the zone for your parcel and quote the assembly accordingly. Don’t buy glazing before that check is done. Call (888) 635-0804 and we’ll pull the requirements for your street.
We tarp the interior, use chip trays and dust barriers on the exterior, and sweep with a magnet at the end of each day. On narrow lots, we stage on the driveway and hand-carry materials rather than setting up in a neighbor’s yard. We tell adjacent neighbors what days we’ll be working. If access is shared, we coordinate before we start. Call (888) 635-0804 and we’ll look at your lot layout during the estimate.
The main factors are driveway width, slope, distance from the truck to the opening, and whether materials must be hand-carried. A 14-foot-wide driveway on an upslope lot means we stage on the driveway and carry everything in; that adds labor compared to a flat street-level lot. We price that access cost on paper, not as an afterthought. Call (888) 635-0804 for a quote that includes the access math.
Ready to get your impact windows and doors measured and priced properly? Call (888) 635-0804. We’ll walk the property, look at the openings, and give you a written line-item estimate. No pressure, no surprises. The crew at TruePane Windows & Doors has been doing this for a long time, and we’re not going anywhere.
Written by Dale Kessler, Owner at TruePane Windows & Doors.



Before
After
Before
After
Before
After