Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Fort Worth
Door installation in Fort Worth runs $450-$2,800 for most entry and swing doors, with double French doors typically landing between $1,900 and $4,600 depending on size, material, and whether the rough opening needs re-squaring. That last part matters more here than in most Texas cities, because Fort Worth sits on Blackland Prairie clay that heaves and settles through the seasons. We price the whole job up front, measure every opening twice, and most installs finish in a single visit. Call (888) 635-0804 for a free line-item estimate.
We’ve spent years working homes from Ridglea Hills to Fairmount, and we know what clay soil does to a door frame in July. This is our Door Installation work, done the way Fort Worth houses actually need it.
Why TruePane Windows & Doors Is Fort Worth’s Preferred Door Installation Company
TruePane is run by Dale Kessler, a second-generation glazier who started this company in 2008 because too many homeowners were getting out-of-true installs and voided warranties. We’ve been at it ever since with one rule on the whiteboard: if the pane is not true, the job is not done. Fort Worth customers call us because we show up when we say we will, in uniform, and we stand behind the work in writing.
Every install is covered by our Done Right Promise. That means if the door binds, the sill leaks, or the frame shifts after we leave, we come back and make it right. No paperwork fights. No fine print that covers neither. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway. That’s The Keystone Standard, and it applies to every door we hang in Fort Worth.
We also answer the phone. A live person picks up 24 hours a day, 7 days a week. Not a voicemail tree. Not a regional call center. When a Fort Worth homeowner calls about a door that won’t latch or a frame that’s pulling away from the brick, they talk to someone who knows what they’re asking about. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Fort Worth neighborhoods directly.
Our Fort Worth customers tend to have lived in their homes for decades. They remember the contractor who left them with a fogged seal and a door that binds every summer. They’re not shopping for the cheapest bid. They want the work done right once, by a company that will still answer the phone in ten years. That’s who we build for.
Our Door Installation Services in Fort Worth
Entry & Swing Doors
A new entry door in a Fort Worth home has to do more than look right from the street. It has to stay square while the ground beneath it moves. In neighborhoods like Arlington Heights and Ryan Place, we routinely see entry doors that stick in August and swing free in January. That’s not a hinge problem. It’s the Blackland Prairie clay expanding and contracting under the slab. We re-square the rough opening, reinforce the jamb, and set the new door so it operates true through the full seasonal cycle. This is the single most common entry door issue in ZIP codes 76103, 76104, and 76105.
Double & French Doors
Double French doors change how a room breathes, especially in Fort Worth ranch homes where a patio or sunroom opens to the backyard. But a pair of doors is only as good as the header above it and the sill pan below it. On a ranch home off Camp Bowie Boulevard in 76107, our crew replaced an original aluminum single-pane sliding patio door with a Pella double French door. The old jamb had racked out of square from clay heave, so we re-framed the opening, installed flashing tape over the sill pan, and re-squared the rough opening before setting the new unit. We noticed the existing header had minor settlement cracks, which we documented and flagged for the homeowner before wrapping the exterior trim. That’s how we scope a French door job in Fort Worth: we look at the structure, not just the opening.
Bifold & Folding Doors
Bifold and folding door systems are popular on Fort Worth patios and outdoor kitchens, where homeowners want a wide opening without a swing radius eating the deck. These units put real weight on the track and the jamb, so we check the floor for level and the header for deflection before we order anything. In homes where the slab has settled unevenly, the track has to be shimmed and leveled first, or the panels will bind halfway open by the first summer.
Pivot Doors
A pivot door makes a statement on a modern Fort Worth build, but the pivot hinge transfers a lot of weight to one point. Standard hinges on heavy pivot or arched doors without reinforced jambs pull loose over time, especially in clay-soil neighborhoods where the frame racks seasonally. We reinforce the jamb, use heavier plates, and set the pivot so the door swings true on day one and year five. For arched and custom doors on older Fort Worth homes, we match the profile and trim so the new unit looks like it belongs to the house, not like an afterthought.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fort Worth
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows. That matters because warranties are only as good as the installer who registers them. When we quote a Fort Worth door, we put the manufacturer options side by side on paper so you can see exactly what each line costs and what it covers. We register both warranty layers in writing before the truck leaves your driveway, and we keep local parts access for Fort Worth customers so turnarounds don’t drag. Whether it’s a PGT impact-rated entry door for a home in Haltom City’s wind zone or an ES Windows custom unit for a Ridglea remodel, the quote shows the full picture.
We’re also an authorized installer for, and we offer Pella repair in Fort Worth as well as new installs. We do not push the cheapest slab in the catalog. We push the door that will still operate correctly after ten Fort Worth summers.
Common Door Installation Problems We See in Fort Worth Homes
- Sticking doors that move with the seasons. In Fort Worth’s Blackland Prairie clay, soil can shrink and swell by over an inch, racking door frames out of square. The fix is re-squaring the rough opening and reinforcing the jamb, not shaving the door slab or adjusting hinges. We see this most in 76103, 76104, and 76105.
- Rot at the jamb base from unflashed sill pans. Exterior doors on clay-soil sites let water pool at the threshold during heavy rains. If the sill pan was never flashed, moisture works into the jamb, the seal fails, and the wood rots. We replace the rotted section, flash the new pan correctly, and set the door so the water has a path out, not in.
- Doors binding on detached shops and ADUs. Fort Worth acreage properties often include outbuildings, workshops, or guest quarters. County inspections may not catch foundation movement on a detached slab, so a door installed square at the time of construction can bind within two years. We scope these jobs expecting settlement and set the door accordingly.
- Historic district compliance failures. In the Fairmount Historic District, the City of Fort Worth has specific rules about door replacements on contributing structures. A standard vinyl double-pane unit may not pass inspection. We know the guidelines and quote compliant options from the first visit, so you don’t pay twice.
Pricing for Door Installation in Fort Worth, TX
Here’s what we tell Fort Worth homeowners up front. A standard entry or swing door installation typically runs $450 to $1,300 for labor, not including the slab itself. A quality energy-efficient prehung entry door with sidelights lands between $1,600 and $2,800. Double French doors run $1,900 to $4,600 installed, depending on size and whether the opening needs re-framing. Custom arched or pivot doors start around $3,200 and climb with size and hardware.
What moves the price in Fort Worth specifically: historic district compliance requirements, clay-soil frame repair, and acreage access for long material hauls. We quote these as separate line items so you see exactly what you’re paying for. Senior and veteran discounts of 5% apply on every job. The estimate is free, written, and does not change once we start. Call (888) 635-0804 and we’ll put the numbers on paper.
We Also Serve Cities Near Fort Worth
Our crews work throughout Fort Worth and the surrounding Tarrant County communities, including Haltom City, Kennedale, North Richland Hills, and Hurst. If you’re in one of those areas, call the same number and we’ll schedule a free estimate. Door Installation in Fort Worth is our home base, and we treat nearby cities with the same care.
Serving Fort Worth, TX - Our Local Coverage Area
We’re based in the Fort Worth area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Fort Worth
Yes. The City of Fort Worth requires a certificate of appropriateness for exterior door replacements on contributing structures in the Fairmount Historic District, and the replacement must match the original lite configuration and profile. We handle the permit paperwork and quote compliant options from the first visit. Call (888) 635-0804 and we’ll walk you through what your block requires.
In Fort Worth, it’s usually both. The Blackland Prairie clay under your slab expands when it’s wet and shrinks in the heat, so the frame shifts by fractions of an inch every season. Over time, the rough opening is no longer square and the door binds. We re-square the opening and reinforce the jamb before hanging the new slab, which fixes the symptom and the cause. Call (888) 635-0804 for an assessment.
If your bungalow is in the Fairmount Historic District, probably not. The City of Fort Worth requires replacements on historic structures to match the original lite configuration and profile, and standard vinyl units rarely qualify. We quote wood or wood-composite doors that meet the guidelines and pass inspection the first time. Outside the historic district, a well-built vinyl door is a practical choice. Call (888) 635-0804 and we’ll check your address against the district map.
It depends on the scope, but most exterior door replacements on detached structures in unincorporated Tarrant County do not require a permit if the rough opening isn’t being enlarged. We check the current county requirements before we quote and flag anything that needs sign-off, so there are no surprises from the inspector. Call (888) 635-0804 and we’ll scope it.
We plan for it in the quote. Long driveways, tight gate clearances, and detached outbuildings mean material delivery and tool access have to be sorted out before the crew arrives. We line out vehicle access, staging area, and haul distance as a line item, not as a surprise on the final bill. Most acreage door installations in Fort Worth finish the same day. Call (888) 635-0804 and we’ll talk through your property.
Get Your Fort Worth Door Installed Right the First Time
If your door sticks, your jamb is pulling away from the brick, or you’re ready to upgrade a tired entry, call (888) 635-0804. We’ll measure, quote, and install with the same standard Dale Kessler has kept on the whiteboard since day one. Free estimates, written warranties, and a company that plans to be in Fort Worth for the next thirty years.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Fort Worth since 2008.