Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Artesia
Door Installation - Artesia projects like sliding and patio door replacement typically run $1,800 to $6,400 installed, depending on the door width, frame material, and glass package, and we schedule a free in-home estimate within a few days of your call. The house you live in was probably built when aluminum single-pane sliders were the default, and many of those units in Artesia have been corroding for five or six decades. We work in 90701 every week, so the drive to your street doesn’t add a “distance fee” and we already know what your 1960s tract home’s rough opening looks like before we arrive. Call (888) 635-0804 and we’ll put a real person on the phone who can talk through what you’re seeing.
Key takeaways:
- Patio slider replacement in Artesia: $1,800-$6,400 installed for most residential jobs
- Storefront sliding door work on Pioneer Boulevard often requires a full commercial glazing upgrade under current CBC and ADA rules
- Original aluminum frames on 1950s-60s tract homes are the single most common failure we see here
- Title 24 compliance is mandatory on permitted patio slider replacements in Artesia
- Free written estimates with line-item pricing, no surprises on the bill
Why TruePane Windows & Doors Is Artesia’s Preferred Sliding & Patio Doors Company
TruePane Windows & Doors is a second-generation glazier’s shop, founded by Dale Kessler, that has spent years doing the kind of work Artesia homeowners inherit: aging aluminum frames, binding sashes, fogged glass, and doors that were never flashed correctly from day one. We’re an authorized installer for more than a dozen manufacturer lines, Anderson and Milgard and PGT among them, so when we quote a slider, we put two or three manufacturer options side by side on paper and register both warranty layers in writing before the truck leaves your driveway. That practice is part of The Keystone Standard, and it’s why our Sliding & Patio Doors team stays busy in Artesia without spending a dime on billboards.
Our technicians are background-checked and uniformed, and they measure every opening twice. The Done Right Promise covers the workmanship, no fine print, no arguing. If the frame is out of true, the job isn’t done until it is. Dale Kessler’s rule is short: if the pane is not true, the job is not done.
We answer the phone live, 24 hours a day, seven days a week, from scheduling and dispatch coordinated out of our Los Angeles office. When you call about a slider in Artesia, you’re not getting a voicemail tree or a callback request. You’re getting a person who can tell you what the likely issue is and when we can be there.
Our Sliding & Patio Doors Services in Artesia
Patio Sliding Doors
Most Artesia homes were built with a single 6-foot or 8-foot aluminum patio slider opening onto a modest yard, which is why Custom Windows & Doors - Artesia upgrades are so common today. In 1960, that was standard. Sixty-plus years later, those frames are oxidizing in Artesia’s marine-influenced air, the rollers are shot, and the glass is single-pane with no low-E. We replace the whole unit, not just the sash, because installing a new vinyl or fiberglass slider into a corroded aluminum jamb simply recreates the problem. A vinyl slider with low-E and argon fills, properly flashed at the rough opening, is what we specify on the vast majority of Artesia tract homes.
Panoramic Sliding Systems
For homeowners on the west side of Artesia who want to open the back wall to a patio, panoramic multi-panel sliders change how a 1950s living room feels. These systems run wider, with panels that stack and glide on steel-reinforced tracks. The engineering matters more than the glass: we calculate header loads and make sure the wall opening is properly reinforced before any panel goes in. On a tight-lot Artesia home, a three- or four-panel panoramic system can transform a dark interior without an addition.
Heavy-Duty Sliding Doors
Heavy-duty sliders, the kind with stainless steel ball-bearing rollers and reinforced stiles, get specified most often on Artesia commercial work, particularly along Pioneer Boulevard where storefront doors take abuse from daily foot traffic and delivery carts. A heavy-duty track and reinforced frame hold alignment far longer than the cheap builder-grade sliders that many previous tenants installed without permits. For residential use, we recommend heavy-duty hardware when a slider exceeds 8 feet or when the door gets opened and closed dozens of times a day.
Pocket & Barn Doors
On Artesia’s small lots, floor space is precious. A pocket door disappears into the wall and frees up the swing clearance that a hinged door needs. We install pocket doors where the wall is not load-bearing or where we can add a header to carry the load, and we make sure the rough opening is plumb and square before the hardware goes in. Barn doors work when there’s wall space adjacent to the opening and the homeowner wants something that doesn’t alter the wall framing. For tight 1950s floor plans, a well-set pocket door often adds more usable square footage than any other single change.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Artesia
We’re an authorized installer for PGT, CGI, Ply Gem, among more than a dozen lines, and we keep common replacement parts for those manufacturers in stock for Artesia jobs so a roller replacement or lock repair doesn’t wait a week on a parts order. PGT and CGI matter most on storefront and impact-rated work along Pioneer Boulevard. Milgard vinyl sliders are our default for residential replacement in Artesia because the fusion-welded frames handle coastal oxidation better than mechanically fastened aluminum and because their glass packages hit Title 24 energy targets without a fight. When we quote, you see the manufacturer line, glass package, and warranty duration side by side on paper.
Common Sliding & Patio Doors Problems We See in Artesia Homes
- Oxidized aluminum frames with fogged glass. Artesia sits 8 to 10 miles inland, close enough that marine air accelerates corrosion on aging aluminum frames but far enough that inland heat loads stress single-pane glass. Homeowners often call it “condensation,” but it’s a failed seal, and a failed seal on an original 1960s frame usually means the whole unit needs replacement, not just the glass.
- Binding sashes on original tract-home sliders. The original aluminum sliders installed in 1950s and 1960s Artesia homes had rollers that were never meant to last 50 years. When the roller housing corrodes and the track wears, the door drags, then jumps, then stops moving at all. Lubrication won’t fix a corroded housing; it masks the failure.
- No pan flashing at the rough opening. On a 1960s Artesia tract home off Pioneer Boulevard, our crew pulled an original patio slider and found zero flashing under the threshold, just raw wood and a bead of old caulk. Any replacement slider we install gets flashing tape at the rough opening before the new unit is set, because water intrusion at the sill is the failure that rots the subfloor long before anyone sees it.
- Unpermitted storefront sliders on Pioneer Boulevard. Dozens of the sliding doors and transom windows along the Pioneer Boulevard Little India corridor were swapped in by one tenant and left for the next. When a new business pulls a renovation permit, city inspectors require the entire storefront assembly to be brought up to current CBC and ADA standards. What looked like a simple door replacement becomes a full commercial glazing job, and we quote that honestly before the permit is filed.
Pricing for Sliding & Patio Doors in Artesia, CA
Window Installation - Artesia and patio sliding door replacement for a typical 6-foot residential opening runs $1,800 to $3,400 for a quality vinyl slider with low-E glass and argon fill. An 8-foot heavy-duty slider runs $2,600 to $4,800. Panoramic multi-panel systems run $5,000 to $12,000 and up depending on panel count and glass package. Pocket doors run $1,900 to $4,200 installed, with the range driven by whether we need to reframe the wall and add a header. The material spec gap matters: a cheap inland-spec vinyl slider with no low-E and minimal frame reinforcement might save $700 on day one, but heat gain through west-facing glass in Artesia will push your cooling load and shorten the hardware life. The coastal-correct spec costs more upfront and costs less over a decade. We put all of it in writing, line by line, before any work starts. Call (888) 635-0804 for a free estimate.
We Also Serve Cities Near Artesia
We work throughout this corner of Los Angeles County, and our Sliding & Patio Doors in Artesia clients often ask about neighbors. Yes, we cover Cerritos, La Palma, Hawaiian Gardens, and Norwalk with the same crews and the same Done Right Promise. If you’re a few blocks across the city line, the trucks still leave from the same Los Angeles office and the estimate is still free.
Serving Artesia, CA - Our Local Coverage Area
We’re based in the Artesia area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Artesia
Artesia’s position roughly 8 to 10 miles inland from the Pacific means marine-influenced air reaches the city at moderate humidity levels, which is enough to accelerate oxidation on bare aluminum frames from the 1950s and 1960s. Cerritos and Lakewood sit slightly farther inland overall, so the same vintage frame often shows less corrosion there. The practical answer is that a 60-year-old aluminum slider in Artesia has likely been fighting salt air its entire service life, and by the time the sash binds or the glass fogs, replacement is the only fix that holds.
Call (888) 635-0804 if you want us to look at the frame in person. The estimate is free.
Yes, in almost every case. When a new tenant or owner pulls a renovation permit on Pioneer Boulevard, city inspectors review the entire storefront assembly, and if the existing sliding door or transom glazing was installed without permits, the correction notice typically requires bringing the assembly up to current California Building Code and ADA standards. That means impact-rated glass, ADA-compliant thresholds, and proper egress hardware. We quote those numbers before the permit application goes in so you’re not blindsided by the inspector’s correction list.
Call (888) 635-0804 and we’ll walk through what an inspector is likely to flag on your storefront.
Yes. California’s Title 24 energy standards apply to any permitted patio slider replacement in Artesia, and nearly every 1950s and 1960s tract home here fails current U-factor and solar heat gain coefficient requirements with its original single-pane glass. A compliant dual-pane unit with low-E coating and argon fill is the standard fix, and it also happens to solve the summer overheating problem that west- and south-facing den rooms in Artesia have lived with for decades.
Call (888) 635-0804 and we’ll confirm what your slider needs for a permitted, compliant installation.
Corroded roller housings inside the sash, usually accompanied by a track that’s worn unevenly and a frame that’s oxidizing at the corners. The homeowner notices the door getting harder to move, then it starts jumping off the track. By that point, lubrication does nothing because the housing itself has disintegrated. The fix is a new unit, and we specify a fusion-welded vinyl frame or a reinforced aluminum frame with marine-grade hardware so the next 30 years don’t repeat the last 30.
Call (888) 635-0804 and we’ll tell you what you’re actually looking at, no charge.
Pocket door installation generally requires a permit if you’re altering wall framing, which nearly every Artesia home needs because 1950s interior walls are framed with 2×4 studs and often carry ceiling load. If the wall is non-load-bearing, the work can sometimes be done without a permit, but a load-bearing wall needs a header and a permit. Barn doors that mount to the wall surface usually don’t require a permit, though they need solid blocking behind the drywall. We’ll tell you honestly which category yours falls into before any saw is lifted.
Call (888) 635-0804 and we’ll check the wall during the free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Artesia and surrounding communities since 2008.