Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Driftwood
Sliding and patio door replacement in Driftwood runs $2,400-$8,500 for a standard two-panel unit installed, and $9,000-$28,000 for the large-format panoramic and multi-panel systems common in Hill Country custom homes. Most jobs wrap in one day once materials land on site. If your door binds in July, fogs on cold mornings, or lets cedar pollen through every December, call us at (888) 635-0804. We work Driftwood from the ridge tops off Madrone Canyon Trail down to the ranch homes along FM 1826, and we quote the work the way it will actually go in: in writing, line by line.
Why TruePane Windows & Doors Is Driftwood’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 after decades of watching glaziers set doors out of true and walk away. The company has carried a simple rule ever since: if the pane is not true, the job is not done. That rule governs every opening we reframe out here in 78619, where there is no city inspector to lean on. Driftwood is unincorporated Hays County. Nobody from a municipal building department is going to check our flashing or verify the jamb size on a 16-foot panoramic opening. We carry that weight ourselves, and we have for years across this region.
Our Driftwood customers are not looking for the lowest bid. They have usually lived in their house for twenty years or more, they remember the contractor who left them a door that binds in August and a seal that fogged by February, and they want the work done right the first time. That is who we’re built for. Background-checked, uniformed technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves the driveway. When a Driftwood homeowner calls, a live person answers. Always.
Our Sliding & Patio Doors Services in Driftwood
We install, replace, and service the full range of sliding and patio door systems you find in Driftwood custom builds and ranch remodels. Here is what that covers locally:
Patio Sliding Doors
The standard two- or three-panel slider remains the workhorse of Driftwood patios, and we replace more of them than anything else. The original units on 1970s-1990s ranch homes off Ranch Road 12 are usually single-pane aluminum, with seals long gone. We reframe undersized openings, set new vinyl or fiberglass units, and flash the sill properly. A typical two-panel patio slider replacement in Driftwood runs $2,400-$5,600 installed, depending on glass package and frame material.
Panoramic Sliding Systems
This is what Driftwood custom estates ask for most. Multi-panel panoramic systems, typically 12 to 20 feet wide, with panels that stack and pocket to open an entire wall to a ridge view. We set Andersen, Pella, Marvin, and PGT panoramic systems regularly out here. The engineering matters more than the glass: a 16-foot opening off Madrone Canyon Trail needs a header sized for the full span and jamb anchors that hold through the cedar-fever season and back. Panoramic slider installation in Driftwood runs $9,000-$28,000 depending on panel count and glass spec.
Heavy-Duty Sliding Doors
Driftwood homeowners on multi-acre lots tend to want doors that can carry a 400-pound glass panel without sagging ten years in. We install heavy-duty sliders with reinforced tracks and stainless roller assemblies rated for commercial-grade panel weights. These make sense for pool-access walls, master-suite openings, and any door that sees constant use. Heavy-duty slider work in Driftwood typically runs $6,500-$15,000.
Pocket & Barn Doors
Pocket door retrofits are common in Driftwood remodels where a swinging door wastes floor space. Barn doors show up more in the Hill Country modern and transitional homes going up along 78619. We do both, including the structural work: carving a pocket into an interior wall is not a trim job, it is a framing job. Pocket and barn door installation in Driftwood runs $1,800-$6,000 depending on whether we are opening a wall or just hanging hardware.
For the full scope of what we cover, see our Sliding & Patio Doors service hub.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Driftwood
We are an authorized installer for more than a dozen manufacturer lines, and for Driftwood we stock and quote PGT, CGI most often. PGT and CGI carry the impact ratings some Driftwood homeowners want after hailstorm seasons, and Marvin’s multi-panel panoramic hardware has been reliable on the big ridge-view openings. We keep common parts local so a roller swap or weatherstripping repair does not wait on a backorder. You get side-by-side manufacturer quotes on paper before you choose, not a verbal recommendation with a markup built in.
Common Sliding & Patio Doors Problems We See in Driftwood Homes
- Thermal-cycling glass failure. Driftwood sits in the Ashe juniper belt where fall and spring days can swing 40°F between morning and afternoon. That thermal cycling stresses IGU seals and door thresholds harder than in Austin’s flatter eastern suburbs, and we regularly replace panes that cracked or fogged after a few seasons of it.
- Limestone dust and cedar pollen in the tracks. Caliche drives and cedar scrub produce fine dust that packs into slider tracks. Without a proper sill pan and weep system, water wicks into the subfloor. On older Driftwood ranch homes, we have found rot under the track that was never visible until the door came out.
- Undersized headers on wide openings. County-only permitting means no city inspector ever checked the structural spec on many Driftwood custom builds. We have opened up walls to find 2×8 headers spanning a 14-foot opening, which is how doors bind and glass cracks. When we reframe, we size it correctly for the span and the panel weight.
- Failed weatherstripping on single-pane sliders. The December-February cedar-fever season punishes any gap in weatherstripping on old aluminum sliders. Driftwood homeowners first notice it as haze on the glass and puffy eyes indoors. Airtight installation is not a luxury out here; it is the difference between a door and a draft.
Pricing for Sliding & Patio Doors in Driftwood, TX
Here are honest ranges for the Driftwood market, based on the work we quote and complete out here. A standard two-panel patio slider replacement runs $2,400-$5,600. Panoramic multi-panel systems run $9,000-$28,000. Heavy-duty sliders: $6,500-$15,000. Pocket and barn door work: $1,800-$6,000. What moves the number most is the opening size, the glass package, and whether the existing framing passes our inspection. In Driftwood, where there is no city inspector to catch a bad rough opening, we check the header and jamb before we quote. That is how your number stays your number. Call (888) 635-0804 for a free estimate. We give you a written line-item quote, not a range and a shrug.
We Also Serve Cities Near Driftwood
Our crews work throughout Hays and Travis County. Beyond Sliding & Patio Doors in Driftwood, we serve San Marcos, Dripping Springs, Buda, and Manchaca. If you are in one of those communities, the same team, the same Done Right Promise, and the same live-person phone line apply.
Serving Driftwood, TX - Our Local Coverage Area
We’re based in the Driftwood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Driftwood
Yes. Driftwood is unincorporated Hays County, so there is no city building department, but a structural change like widening a door opening still requires a Hays County permit. We pull it. We handle the county paperwork, and because there is no municipal inspection, the quality of the flashing and framing comes down to the contractor’s own discipline. Ours is written into the quote.
Cedar pollen from December through February is fine enough to get past worn weatherstripping on any older slider, and Driftwood’s heavy cedar cover makes it worse than in town. The first sign is usually haze on the interior glass and a fine yellow dust settling on the track. Replace the weatherstripping and check the sill pan, and the door seals. Call (888) 635-0804 and we will come out, look, and quote the fix.
Honestly? Sometimes no. Wide openings in Driftwood custom homes were not always framed for the panel weight of a modern 16-foot panoramic system, and county-only permitting meant nobody caught undersized headers before. We inspect the rough opening before quoting. If the framing will not carry the load, we reframe it, and that work is in the written estimate before you sign. The price does not move after the wall comes open unless you approve a change in writing.
That is a failed seal. Driftwood’s sharp overnight temperature drops stress the edge seal on aging insulated glass, and once the desiccant inside saturates, moisture condenses between the panes on cold mornings. It is not a cleaning problem; the IGU needs replacement. We replace failed glass in Driftwood regularly, and both manufacturer warranty layers get registered in writing.
Yes. We specify sill pans and track systems built for fine dust and grit, and we pre-plan deliveries on caliche and gravel drives where a standard delivery truck has no paved turnaround. Oversized panoramic units on a Driftwood ridge lot often need crane or boom truck staging, and we plan that before the order goes in, not the morning of install. Call (888) 635-0804 to talk through your specific site.
On a ridge-view estate off Madrone Canyon Trail, our crew replaced a failed 16-foot panoramic sliding system with a new Marvin multi-panel unit. The original install had no sill flashing tape under the track, and cedar pollen had packed the weep channels, trapping water that rotted the subfloor. We reframed the opening with pressure-treated lumber, re-flashed with butyl tape before setting the new track, and upgraded the glazing to low-E with argon fill. The homeowner noticed the difference immediately during the next cedar-fever front. That is what we mean when we say we stand behind it.
If you have a slider that binds, fogs, or leaks in Driftwood, call (888) 635-0804 for a free estimate. We will answer the phone, we will show up when we say, and we will give you a written quote that covers the framing, the flashing, and the glass, line by line.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving the Driftwood community with a craftsman’s standard since our first day in the field.